1. પરિચય
The COMPUTHERM Q7RF wireless room thermostat is designed for precise control of heating and air conditioning systems. This programmable device allows you to set individual temperature schedules for each day of the week, optimizing comfort and energy efficiency in your home or office. Its wireless design offers flexible placement of the thermostat unit, while the receiver unit connects directly to your boiler or air conditioning system, compatible with both 24V and 230V control circuits.
2. પેકેજ સામગ્રી
ખાતરી કરો કે બધા ઘટકો તમારા પેકેજમાં હાજર છે:
- 4 x COMPUTHERM Q7RF Room Thermostat (Transmitter Unit)
- 4 x COMPUTHERM Q7RF Receiver Unit
- વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
- માઉન્ટિંગ સ્ક્રૂ અને દિવાલ પ્લગ
3. ઉત્પાદન ઓવરview
The COMPUTHERM Q7RF system consists of two main components: the thermostat unit (transmitter) and the receiver unit. The thermostat unit measures the room temperature and allows you to set desired temperatures and programs. The receiver unit connects to your heating or cooling system and switches it on or off based on signals from the thermostat unit.
આકૃતિ 1: ઓવરview of the COMPUTHERM Q7RF 4-piece set, showing multiple thermostat and receiver units.
Figure 2: A single COMPUTHERM Q7RF thermostat unit communicating wirelessly with its receiver unit.
3.1 Thermostat Unit (Transmitter)
- એલસીડી ડિસ્પ્લે: Shows current temperature, set temperature, time, day, and program status.
- નિયંત્રણ બટનો: For setting temperature, time, and programming schedules.
- બેટરી કમ્પાર્ટમેન્ટ: પાવર સપ્લાય માટે.
3.2 રીસીવર યુનિટ
- વાયરિંગ ટર્મિનલ્સ: For connection to the heating/cooling system.
- સ્થિતિ સૂચકાંકો: LEDs to show power and relay status.
- Manual Override Buttons: For temporary manual control.
4. સ્પષ્ટીકરણો
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| બ્રાન્ડ | કમ્પ્યુટર |
| મોડલ | Q7RF |
| સ્વિચિંગ વોલ્યુમtage | 24V AC/DC, ... 250V AC, 50Hz |
| પાવર વપરાશ | 6W |
| તાપમાન માપન શ્રેણી | 3 – 45°C (in 0.1°C increments) |
| એડજસ્ટેબલ તાપમાન શ્રેણી | 5 – 40°C (in 0.5°C increments) |
| તાપમાન માપન ચોકસાઈ | ±0.5°C |
| નિયંત્રક પ્રકાર | બટન દબાવો |
| કનેક્ટિવિટી ટેકનોલોજી | Wireless (Radio Frequency) |
| ખાસ લક્ષણો | Programmable, Compatible with various system voltages |
5. સેટઅપ અને ઇન્સ્ટોલેશન
5.1 Thermostat Unit Placement and Battery Installation
- સ્થાન પસંદ કરો: Place the thermostat unit in a central area of the room where it can accurately measure the ambient temperature, away from direct sunlight, drafts, or heat sources.
- બેટરીઓ ઇન્સ્ટોલ કરો: Open the battery compartment on the back of the thermostat unit. Insert the required batteries (typically AA or AAA, refer to the unit's markings) ensuring correct polarity. Close the compartment.
- પાવર ચાલુ: The display should light up, indicating the unit is powered.
5.2 Receiver Unit Wiring
WARNING: Electrical installation should only be performed by a qualified electrician. Disconnect power to the heating/cooling system before proceeding.
- Mount the Receiver: Secure the receiver unit near your boiler or air conditioning system using the provided screws and wall plugs.
- Access Wiring Terminals: Open the cover of the receiver unit to expose the wiring terminals.
- સિસ્ટમ સાથે કનેક્ટ કરો: Connect the receiver unit to the two-wire room thermostat connection point of your boiler or AC system. Ensure connections are secure and follow the wiring diagram provided with your heating/cooling system and the receiver unit. The COMPUTHERM Q7RF is compatible with both 24V and 230V control circuits.
- પાવર પુન Restસ્થાપિત કરો: Once wiring is complete and verified, close the receiver unit cover and restore power to your heating/cooling system.
5.3 Pairing the Units (If not pre-paired)
Refer to the specific instructions provided with your Q7RF set for pairing procedures. Typically, this involves pressing a pairing button on the receiver unit and then initiating a pairing sequence on the thermostat unit within a short timeframe. A successful pairing will usually be indicated by an LED on the receiver or a message on the thermostat display.
6. ઓપરેટિંગ સૂચનાઓ
૪.૪ એલસીડી ડિસ્પ્લેને સમજવું
The LCD display provides all necessary information about the thermostat's current status and settings.
આકૃતિ 3: વિગતવાર view of the COMPUTHERM Q7RF LCD display, illustrating various indicators such as program number, manual modification symbol, weekdays, time, set temperature, actual room temperature, low battery symbol, boiler ON state, and timed control symbol.
- અઠવાડિયાના દિવસો: અઠવાડિયાનો વર્તમાન દિવસ સૂચવે છે.
- Exact Time / Time Left: Displays the current time or time remaining for a manual modification.
- પ્રોગ્રામ નંબર: Shows the active program segment.
- તાપમાન સેટ કરો: The desired temperature set by the user.
- Actual Room Temperature: The current temperature measured by the thermostat.
- Symbol for Manual Modification: Indicates that the thermostat is currently operating under a temporary manual override.
- Temp. Modified until next manual intervention: Shows the duration of a temporary temperature change.
- Symbol for Low Battery Voltage: Appears when batteries need replacement.
- Symbol for Boiler ON State: Indicates when the heating/cooling system is active.
- Symbol for Timed Control: Indicates that a programmed schedule is active.
૫.૧ વર્તમાન સમય અને દિવસ સેટ કરવો
- દબાવો TIME બટન
- નો ઉપયોગ કરો + or - buttons to adjust the hour, then press TIME પુષ્ટિ કરવા માટે ફરીથી.
- અઠવાડિયાના મિનિટો અને દિવસ માટે પુનરાવર્તન કરો.
6.3 મેન્યુઅલ ટેમ્પરેચર એડજસ્ટમેન્ટ
- સામાન્ય ઓપરેટિંગ મોડમાં, દબાવો + or - ઇચ્છિત તાપમાનને સમાયોજિત કરવા માટે બટનો.
- The new temperature will be maintained until the next programmed time slot or until manually overridden again.
6.4 Programming Daily/Weekly Schedules
The Q7RF allows for independent programming for each day of the week. You can typically set multiple time periods with different temperatures for each day.
- દબાવો પ્રોગ પ્રોગ્રામિંગ મોડ દાખલ કરવા માટે બટન.
- નો ઉપયોગ કરો DAY button to select the day you wish to program (e.g., MON, TUE, etc.).
- નો ઉપયોગ કરો TIME અને +/- buttons to set the start time for the first program period.
- નો ઉપયોગ કરો સેટ ટેમ્પ અને +/- buttons to set the desired temperature for this period.
- દબાવો પ્રોગ again to move to the next program period for the same day, or use DAY બીજા દિવસે ખસેડવા માટે.
- Repeat until all desired periods and days are programmed.
- દબાવો ચલાવો or બહાર નીકળો button to save and exit programming mode.
7. જાળવણી
7.1 બેટરી રિપ્લેસમેન્ટ
When the low battery symbol appears on the LCD display, replace the batteries immediately to ensure continuous operation. Use new, high-quality alkaline batteries of the specified type.
- Open the battery compartment cover on the back of the thermostat unit.
- જૂની બેટરીઓ દૂર કરો.
- Insert new batteries, observing correct polarity (+/-).
- બેટરી કમ્પાર્ટમેન્ટ કવર બંધ કરો.
7.2 સફાઈ
Clean the thermostat and receiver units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the units, as this may damage the electronics or finish.
8. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| થર્મોસ્ટેટ ડિસ્પ્લે ખાલી છે | મૃત બેટરીઓ | બેટરીને નવી સાથે બદલો. |
| હીટિંગ/કૂલિંગ સિસ્ટમ કામ કરી રહી નથી | 1. Receiver unit not powered 2. Units not paired 3. Wiring issue 4. શ્રેણીની બહાર | 1. Check power supply to receiver. 2. Perform pairing procedure (Section 5.3). 3. Verify wiring connections (Section 5.2). 4. Move thermostat closer to receiver or check for obstructions. |
| ખોટું તાપમાન વાંચન | Thermostat placed in unsuitable location (direct sun, draft) | Relocate thermostat to a more central and stable temperature area. |
| Programmed schedule not active | Thermostat in manual override mode | Exit manual override mode (e.g., press RUN/AUTO button) to resume programmed operation. |
9. વોરંટી અને સપોર્ટ
COMPUTHERM products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, please reach out to the COMPUTHERM customer service or your local distributor. Keep your purchase receipt as proof of purchase.
