1. પરિચય
This manual provides comprehensive instructions for the installation, operation, and maintenance of the TACO ED-501-AL Grade 1 Rim Surface Exit Device. This device is designed for commercial applications, offering a durable and efficient solution for emergency exits.
The ED-501-AL is a Grade 1 certified product, ensuring high durability and reliability for demanding environments such as offices, factories, and storehouses. Its design allows for a closer integration with the door, minimizing obstruction.
2. સલામતી માહિતી
મહત્વપૂર્ણ: Read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or injury.
- ઇન્સ્ટોલેશન દરમિયાન હંમેશા યોગ્ય વ્યક્તિગત રક્ષણાત્મક ઉપકરણો (PPE) પહેરો, જેમાં સલામતી ચશ્મા અને મોજાનો સમાવેશ થાય છે.
- Ensure the door and frame are structurally sound and capable of supporting the device.
- Do not modify the device in any way, as this may compromise its functionality and safety ratings.
- બાળકો અને અનધિકૃત કર્મચારીઓને ઇન્સ્ટોલેશન એરિયાથી દૂર રાખો.
3. પેકેજ સામગ્રી
ઇન્સ્ટોલેશન શરૂ કરતા પહેલા ખાતરી કરો કે બધા ઘટકો હાજર છે:
- TACO ED-501-AL Rim Surface Exit Device
- Lock front filler
- Strike filler
- સેક્સ બોલ્ટ્સ
- માઉન્ટિંગ સ્ક્રૂ અને હાર્ડવેર
- સ્થાપન સૂચનાઓ (આ માર્ગદર્શિકા)
Figure 3.1: Included hardware components, including various screws, fillers, and a strike plate.
4. સ્પષ્ટીકરણો
| લક્ષણ | વિગત |
|---|---|
| મોડલ નંબર | ED-501-AL |
| સામગ્રી | એલ્યુમિનિયમ |
| સમાપ્ત કરો | Lacquered Aluminum |
| દરવાજાની જાડાઈ સુસંગતતા | 1-3/4" to 2 inches |
| Door Width Compatibility | 26" to 36" inches |
| Minimum Stile Required | 3 ઇંચ |
| ઉત્પાદન પરિમાણો | 41.5 x 2.5 x 6 ઇંચ |
| વસ્તુનું વજન | 8.38 પાઉન્ડ |
| પ્રમાણપત્રો | ANSI A156.3 Grade 1, UL Listed SA32524 |
| ઉપયોગ | Indoor, Commercial/Industrial |
5. સેટઅપ અને ઇન્સ્ટોલેશન
The TACO ED-501-AL exit device is designed for easy installation with minimum working parts. Ensure your door meets the compatibility requirements listed in the specifications section before proceeding.
આકૃતિ 5.1: ફ્રન્ટ view of the TACO ED-501-AL exit device.
5.1. પ્રી-ઇન્સ્ટોલેશન તપાસો
- Confirm door thickness is between 1-3/4" and 2 inches.
- Verify door width is between 26" and 36" inches.
- Ensure a minimum stile width of 3 inches is available on the door.
- Gather necessary tools: drill, measuring tape, screwdriver, pencil.
5.2. સ્થાપન પગલાં
- દરવાજો તૈયાર કરો: Mark the desired height for the exit device on the door. The device should be installed at a height that allows for comfortable operation.
- Mount the Device Body: Position the main body of the exit device on the door. Use the provided sex bolts and mounting screws to secure it firmly. The interlocking top latch and Pullman bottom latch are designed for faster installation.
- સ્ટ્રાઈક પ્લેટ ઇન્સ્ટોલ કરો: Align the strike plate with the latch mechanism on the door frame. Mark and drill pilot holes, then secure the strike plate using the appropriate screws. Use the included strike filler if necessary for proper alignment.
- Install Lock Front Filler (if applicable): If your installation requires it, install the lock front filler according to the specific door configuration.
- ટેસ્ટ ઓપરેશન: Once installed, test the device by pushing the bar to ensure smooth and complete retraction of the latch bolt. Ensure the door opens freely.
આકૃતિ 5.2: કોણીય view of the TACO ED-501-AL exit device, showing its low-profile ડિઝાઇન
6. ઓપરેટિંગ સૂચનાઓ
The TACO ED-501-AL Rim Surface Exit Device is designed for intuitive and reliable operation.
6.1. Exiting a Secured Area
To exit a secured area, simply apply pressure to the push bar of the exit device. The latch bolt will retract, allowing the door to open. Release the push bar, and the latch bolt will automatically extend, securing the door once closed.
6.2. Entry (External Access)
This device is primarily for exit-only applications. For external entry, an appropriate external trim (e.g., lever or knob with key cylinder) must be installed in conjunction with the exit device. Refer to the external trim's installation manual for specific instructions.
7. જાળવણી
Regular maintenance ensures the longevity and proper functioning of your TACO ED-501-AL exit device.
- સફાઈ: Clean the device periodically with a soft, damp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સ ટાળો જે ફિનિશને નુકસાન પહોંચાડી શકે છે.
- લુબ્રિકેશન: Lightly lubricate moving parts (e.g., latch bolt mechanism) annually with a silicone-based lubricant. Do not over-lubricate.
- નિરીક્ષણ: Regularly inspect the device for any signs of wear, loose screws, or damage. Ensure the push bar operates smoothly without binding.
- ગોઠવણો: If the device does not operate smoothly, check for proper alignment of the strike plate and latch bolt. Adjust as necessary.
8. મુશ્કેલીનિવારણ
સામાન્ય સમસ્યાઓ અને તેમના ઉકેલો માટે નીચેના કોષ્ટકનો સંદર્ભ લો:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Device does not latch properly. | Misaligned strike plate; Latch bolt obstructed; Worn components. | Check and adjust strike plate alignment. Clear any obstructions. Inspect for wear and replace if necessary. |
| Push bar is stiff or binds. | Lack of lubrication; Debris in mechanism; Bent push bar. | Apply lubricant to moving parts. Clean out any debris. Inspect for damage and replace if bent. |
| Door does not open when push bar is pressed. | Latch bolt not retracting fully; Door binding in frame. | Check for obstructions around the latch bolt. Ensure door hinges are functioning correctly and door is not binding. |
9. વોરંટી અને સપોર્ટ
For warranty information or technical support regarding your TACO ED-501-AL Rim Surface Exit Device, please contact TACO customer service directly. Keep your purchase receipt and model number handy for faster service.
ઉત્પાદક: ટેકો
મોડલ: ED-501-AL
For further assistance, visit the manufacturer's official webસાઇટ પર જાઓ અથવા તેમની સપોર્ટ લાઇનનો સંપર્ક કરો.
