એમેઝોન બેઝિક્સ 12V 150 PSI ડિજિટલ ટાયર ઇન્ફ્લેટર યુઝર મેન્યુઅલ

પરિચય

Thank you for choosing the amazon basics Compact Portable 12V 150 PSI Digital Tyre Inflator. This manual provides essential information for the safe and efficient operation of your new device. Please read it thoroughly before use and retain it for future reference.

This compact and portable tyre inflator is designed for convenient inflation of vehicle tyres (cars, motorcycles, scooters) and other inflatable items. It features a digital gauge for precise pressure settings, an auto-shutoff function, and a built-in LED light for visibility in low-light conditions.

સલામતી માહિતી

ઈજા કે નુકસાન અટકાવવા માટે હંમેશા નીચેના સલામતી માર્ગદર્શિકાઓનું પાલન કરો:

• ફાટવાનું જોખમ: Do not adjust the regulator to result in an output pressure greater than the marked maximum pressure of the attachment.
• ઈજાનું જોખમ: Do not direct the air stream at your body or other individuals.
• પર્યાવરણીય સંપર્ક: Do not expose the device to rain. Store indoors in a dry place.
• Ensure the vehicle engine is running when using the inflator to avoid draining the car battery.
• Do not operate the inflator for more than 10 minutes continuously. Allow a 10-minute cool-down period after each operation.

પેકેજ સામગ્રી

અનપેક કરતી વખતે, ખાતરી કરો કે નીચેની બધી વસ્તુઓ હાજર છે:

• 1 x amazon basics Digital Tyre Inflator (Model AC010225C)
• 1 x વપરાશકર્તા માર્ગદર્શિકા
• 1 x વહન કેસ
• 1 x 12V Cigarette Lighter Power Cord (integrated)
• 1 x Air Hose (integrated)
• 2 x Inflation Attachments (for balls, balloons, etc.)
• 1 x ફાજલ ફ્યુઝ
• 2 x Warning Cards

Image: The amazon basics Digital Tyre Inflator neatly stored within its carrying case.

ઉત્પાદન લક્ષણો

• Compact 12-volt portable tyre inflator.
• Plugs into a standard 12V cigarette lighter port.
• Maximum pressure rating of 150 PSI.
• Airflow capacity: 22 L/M (liters per minute) at 0 PSI.
• 10-foot power cord for extended reach.
• 23.6-inch air hose for easy connection to tyres.
• Digital gauge with auto-shutoff capability for precise inflation.
• Built-in LED light for illumination in dark environments.

છબી: ક્લોઝ-અપ view of the digital display, 'SET' button, arrow buttons, and 'OFF/COMPRESSOR ON' and 'FLASH OFF/LIGHT' buttons.

સેટઅપ

1. Unpack the Inflator: Remove the tyre inflator and its accessories from the carrying case.
2. Locate Power Cord and Air Hose: The power cord and air hose are stored within compartments on the device. Gently pull them out.
3. પાવરથી કનેક્ટ કરો: Insert the 12V cigarette lighter plug into your vehicle's 12V accessory socket. Ensure the vehicle's engine is running to provide adequate power and prevent battery drain.
4. Attach Air Hose to Tyre: Screw the air hose connector onto the tyre valve stem until it is securely fastened. For other inflatables, use the appropriate inflation attachment.

Image: The rear of the inflator, illustrating the integrated storage for the air hose and the 12V power cord.

ઓપરેટિંગ સૂચનાઓ

1. પાવર ચાલુ: Once connected to the 12V power source, the digital display will illuminate, showing the current tyre pressure.
2. ઇચ્છિત દબાણ સેટ કરો: Press the 'SET' button to cycle through pressure units (PSI, BAR, KPA). Use the '+' and '-' buttons to adjust the target pressure.
3. ફુગાવો શરૂ કરો: Press the 'COMPRESSOR ON' button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
4. ફુગાવાનું નિરીક્ષણ કરો: Keep an eye on the digital display during inflation.
5. એલઇડી લાઇટનો ઉપયોગ: Press the 'LIGHT' button to turn on the built-in LED flashlight for use in dark conditions. Press again to turn off.
6. ડિસ્કનેક્ટ કરો: Once inflation is complete and the compressor has stopped, press 'COMPRESSOR OFF', then carefully unscrew the air hose connector from the tyre valve.
7. સંગ્રહ: Coil the air hose and power cord back into their designated storage compartments. Store the inflator in its carrying case.

Image: The digital tyre inflator connected to a car tire, actively inflating it.

મહત્વપૂર્ણ ઓપરેટિંગ નોંધો:

• The maximum continuous run time for the inflator is 10 minutes. After 10 minutes of operation, allow the device to cool down for at least 10 minutes before resuming use. This prevents overheating and extends product life.
• For optimal performance and safety, always refer to your vehicle's owner's manual for recommended tyre pressure.

જાળવણી

• સફાઈ: ઇન્ફ્લેટરના બાહ્ય ભાગને સોફ્ટ, ડી વડે સાફ કરોamp કાપડ ઘર્ષક ક્લીનર્સનો ઉપયોગ કરશો નહીં અથવા ઉપકરણને પાણીમાં ડૂબાડશો નહીં.
• સંગ્રહ: Store the inflator in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• ફ્યુઝ રિપ્લેસમેન્ટ: The 12V cigarette lighter plug contains a replaceable fuse. If the inflator stops working, check and replace the fuse if necessary. A spare fuse is included in the package.

મુશ્કેલીનિવારણ

• ઇન્ફ્લેટર ચાલુ થતું નથી:
  • Ensure the 12V cigarette lighter plug is fully inserted into the vehicle's socket.
  • Check the vehicle's 12V accessory socket for power.
  • Inspect the fuse in the 12V plug and replace if blown.
• ઇન્ફ્લેટર ચાલે છે પણ ફુલાવતું નથી:
  • Ensure the air hose is securely screwed onto the tyre valve stem.
  • Check for any leaks in the air hose or connections.
• Inflator overheats and shuts off:
  • This is a safety feature. Allow the device to cool down for 10 minutes before resuming operation. Avoid continuous operation beyond 10 minutes.

વિશિષ્ટતાઓ

Image: Visual representation of the inflator's dimensions: 18.59 cm length, 17.81 cm width, and 7.37 cm height.

ઉત્પાદન ઓવરview વિડિયો

Watch this video for an unboxing and overview of the amazon basics Digital Tyre Inflator, demonstrating its components and initial handling.

વોરંટી અને આધાર

For customer service and warranty-related inquiries, please refer to the contact information provided with your purchase documentation or visit the official amazon basics support page.

કોઈપણ વોરંટી દાવા માટે કૃપા કરીને તમારી ખરીદીનો પુરાવો રાખો.