LUX Kono KN-S-MG1 સ્માર્ટ થર્મોસ્ટેટ વપરાશકર્તા માર્ગદર્શિકા

પરિચય

This manual provides detailed instructions for the installation, setup, and operation of your LUX Kono KN-S-MG1 Smart Thermostat. Please read this manual thoroughly before beginning installation or operation to ensure proper functionality and safety.

The LUX Kono KN-S-MG1 is a programmable smart thermostat designed to personalize your home comfort and optimize energy savings through features like geofencing and remote control via the LUX app.

સલામતી માહિતી

ચેતવણી: વિદ્યુત આંચકો સંકટ

• Always turn off power to the heating and cooling system at the main circuit breaker or fuse box before installing or servicing the thermostat.
• Improper wiring can cause damage to the thermostat or the HVAC system.
• જો તમને કોઈપણ પગલાં વિશે ખાતરી ન હોય, તો ઇન્સ્ટોલેશન લાયક ટેકનિશિયન દ્વારા કરાવવું જોઈએ.
• Ensure all wiring connections are secure and insulated.

પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:

• LUX Kono KN-S-MG1 Smart Thermostat
• માઉન્ટિંગ હાર્ડવેર (સ્ક્રૂ, વોલ એન્કર)
• LUX Power Bridge (for systems without a C-wire)
• ઇન્સ્ટોલેશન માર્ગદર્શિકા (આ દસ્તાવેજ)

સ્થાપન

Before installation, ensure the power to your HVAC system is turned off at the circuit breaker.

1. Remove Old Thermostat

1. Turn off power to your HVAC system at the circuit breaker.
2. તમારા જૂના થર્મોસ્ટેટનું કવર દૂર કરો.
3. સંદર્ભ માટે વાયરિંગ કનેક્શનનો ફોટો લો.
4. Disconnect the wires one by one, labeling each wire with the corresponding terminal letter (e.g., R, C, Y, G, W).
5. Remove the old thermostat's backplate from the wall.

2. Wiring the Kono KN-S-MG1

The Kono KN-S-MG1 requires a C-wire for continuous power. If your system does not have a C-wire, use the included LUX Power Bridge.

સુસંગતતા:

• Forced air, gas, oil & electric furnaces (up to 2 Heat/1 Cool stagએસએસ)
• Heat pump systems (with or without auxiliary/emergency heat)

Refer to the wiring diagram specific to your HVAC system type. Connect the labeled wires to the corresponding terminals on the Kono backplate.

છબી: આગળ view of the LUX Kono KN-S-MG1 Smart Thermostat, displaying its digital screen and control knob.

3. થર્મોસ્ટેટ માઉન્ટ કરવું

1. Mount the Kono backplate to the wall using the provided screws and anchors. Ensure it is level.
2. Carefully push any excess wire back into the wall opening.
3. Align the Kono thermostat body with the backplate and gently push it into place until it clicks securely.

Image: The LUX Kono KN-S-MG1 Smart Thermostat installed on a wall, blending into a modern dining room environment.

પ્રારંભિક સેટઅપ અને Wi-Fi કનેક્શન

1. પાવર ચાલુ: Restore power to your HVAC system at the circuit breaker. The thermostat display should illuminate.
2. Download the LUX App: Download the official LUX app from your smartphone's app store.
3. એકાઉન્ટ બનાવો: નવું યુઝર એકાઉન્ટ બનાવવા માટે એપ્લિકેશનમાં આપેલી સૂચનાઓનું પાલન કરો અથવા જો તમારી પાસે પહેલેથી જ એકાઉન્ટ હોય તો લોગ ઇન કરો.
4. Wi-Fi થી કનેક્ટ કરો: The app will guide you through connecting your Kono thermostat to your home Wi-Fi network. Ensure your Wi-Fi network is 2.4GHz compatible.
5. રચના ની રૂપરેખા: The app will prompt you to configure your HVAC system type (e.g., conventional, heat pump) and other settings.

ઓપરેટિંગ સૂચનાઓ

મૂળભૂત કામગીરી

• એડજસ્ટિંગ તાપમાન: Use the control knob on the thermostat or the LUX app to set your desired temperature.
• સિસ્ટમ મોડ: Switch between Heat, Cool, Auto, and Off modes using the thermostat interface or the app.
• ચાહક સ્થિતિ: Select Fan On (continuous operation) or Fan Auto (fan runs only when heating/cooling) via the thermostat or app.

પ્રોગ્રામિંગ શેડ્યૂલ્સ

The Kono KN-S-MG1 allows you to create custom heating and cooling schedules to optimize comfort and energy usage. Schedules are typically managed through the LUX app for ease of use.

• Open the LUX app and navigate to the scheduling section.
• Create daily or weekly schedules with different temperature settings for various times of the day (e.g., Wake, Away, Home, Sleep).
• Save your schedules to activate them on the thermostat.

અદ્યતન સુવિધાઓ

• Geofencing (Home & Away Aware): This feature uses your smartphone's location to automatically adjust the thermostat when you leave or approach your home, saving energy when away and ensuring comfort upon return. Enable and configure this feature within the LUX app.
• રીમોટ કંટ્રોલ: Control your thermostat from anywhere using the LUX app on your smartphone.
• અવાજ નિયંત્રણ: The Kono KN-S-MG1 supports integration with certain smart home platforms like Android and Vera for voice control. Note: This product does NOT work with Amazon Alexa or Apple HomeKit.

જાળવણી

• સફાઈ: થર્મોસ્ટેટના બાહ્ય ભાગને સોફ્ટ, ડીથી સાફ કરોamp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• સૉફ્ટવેર અપડેટ્સ: Ensure your LUX app and thermostat firmware are up to date for optimal performance and new features. Updates are typically managed through the LUX app.
• કોઈ બેટરીની જરૂર નથી: The Kono KN-S-MG1 is powered by your HVAC system (C-wire) or the LUX Power Bridge, so no battery replacement is necessary.

મુશ્કેલીનિવારણ

For further assistance, please contact LUX customer support.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

For warranty information and technical support, please refer to the official LUX website or contact LUX customer service directly. Keep your purchase receipt as proof of purchase.

Image: The retail packaging for the LUX Kono Smart Thermostat, showing the product image and key features.