SVBONY SV101 54-inch Aluminum Alloy Travel Tripod Instruction Manual

પરિચય

This manual provides detailed instructions for the proper setup, operation, and maintenance of your SVBONY SV101 54-inch Aluminum Alloy Travel Tripod. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

સલામતી માહિતી

ચેતવણી: Do not look directly into the sun through any optical device mounted on this tripod, as this can cause severe and permanent eye damage.

Always ensure your device is securely mounted to the tripod head before releasing your grip. Avoid placing the tripod on unstable or uneven surfaces. Do not exceed the maximum load capacity of 2.5 kg (5.5 lbs).

ઉત્પાદન ઘટકો

The SVBONY SV101 tripod is constructed from aluminum alloy and ABS plastic, designed for durability and portability. Familiarize yourself with the main components:

• Pan Head: Features a 3-way flexible pan head with tilt and swivel motion, and a quick-release plate.
• ઝડપી પ્રકાશન પ્લેટ: For easy attachment and detachment of devices.
• Pan Handle: For smooth adjustments of the pan head.
• બબલ View સ્તરો: Integrated for precise leveling.
• મધ્ય સ્તંભ: Extends for additional height.
• પગના વિભાગો: Four-section telescopic legs with quick-release locks.
• રબર ફીટ: Anti-skid rubber feet for stability on various surfaces.
• Leg Braces: Provide additional stability to the tripod legs.

સેટઅપ સૂચનાઓ

1. ટ્રાઇપોડ ખોલવું: Gently spread the tripod legs outwards until they are fully extended and stable.
2. પગની ઊંચાઈ ગોઠવવી: Unlock the quick-release leg locks on each leg section. Extend the legs to the desired height. Securely close the quick-release locks to ensure stability. Repeat for all leg sections.



3. Extending the Center Column: If additional height is needed, loosen the center column locking knob, raise the center column to the desired position, and then tighten the knob firmly.
4. તમારા ઉપકરણને જોડવું:
   • Remove the quick-release plate from the pan head by lifting the safety latch and sliding it out.
   • Attach your camera, spotting scope, or camcorder to the quick-release plate using the standard 1/4-inch screw mount. Ensure it is tightened securely.
   • Slide the quick-release plate with your device back into the pan head until it clicks into place. Verify that it is locked and secure.

ઓપરેટિંગ સૂચનાઓ

1. Leveling the Tripod: Use the built-in bubble view levels on the pan head to ensure the tripod is perfectly level before use. Adjust the leg heights as necessary.



2. Adjusting Pan and Tilt: Loosen the pan handle to adjust the horizontal (pan) and vertical (tilt) angles of your device. The 3-way pan head allows for 360-degree rotation and 90-degree vertical shooting. Tighten the pan handle once the desired position is achieved.

જાળવણી

• સફાઈ: દરેક ઉપયોગ પછી ધૂળ અને ગંદકી દૂર કરવા માટે ત્રપાઈને નરમ, સૂકા કપડાથી સાફ કરો. હઠીલા રજકણ માટે, સહેજ ડીamp કાપડ અને હળવો સાબુ, પછી સારી રીતે સૂકવો.
• સંગ્રહ: When not in use, fold the tripod to its compact size and store it in the provided carrying bag in a dry, cool place.



• લુબ્રિકેશન: Moving parts generally do not require lubrication. If any part feels stiff, consult customer support.
• નિરીક્ષણ: Periodically check all screws, knobs, and leg locks to ensure they are tight and functioning correctly.

મુશ્કેલીનિવારણ

• ટ્રાઇપોડ અસ્થિર છે: Ensure all leg sections are fully extended and their quick-release locks are securely fastened. Verify the center column locking knob is tight. Check that the tripod is on a flat, stable surface.
• Device wobbles on the head: Confirm the quick-release plate is properly seated and locked into the pan head. Ensure the device is tightly screwed onto the quick-release plate.
• Pan/tilt movement is stiff: Loosen the pan handle slightly. If the issue persists, check for any obstructions or debris.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

For warranty information or technical support, please refer to the SVBONY official webસાઇટ પર જાઓ અથવા તમારા રિટેલરનો સંપર્ક કરો. વોરંટી દાવાઓ માટે તમારી ખરીદીની રસીદ રાખો.