KWANWA KW715S 2-in-1 Alarm Clock and Indoor Thermometer Instruction Manual

1. ઉત્પાદન ઓવરview

The KWANWA KW715S is a versatile 2-in-1 device functioning as both a digital alarm clock and an indoor thermometer. Designed for portability and ease of use, it features a clear digital display, adjustable brightness, and long-lasting battery operation. Simply flip the device to switch between time and temperature display modes.

2. સેટઅપ

2.1 બેટરી ઇન્સ્ટોલેશન

The KWANWA KW715S operates on 2x AA આલ્કલાઇન બેટરી (not included). Ensure correct polarity when inserting the batteries into the compartment located on the back of the device.

૨.૩ પ્રારંભિક સમય સેટિંગ

1. દબાવો અને પકડી રાખો ટાઇમ સેટ button (located on the back) for 2 seconds until the hour digits begin to flash.
2. નો ઉપયોગ કરો કલાક અને MIN સમય સમાયોજિત કરવા માટે બટનો.
3. દબાવો ટાઇમ સેટ ફરીથી પુષ્ટિ કરવા અને સમય સેટિંગ મોડમાંથી બહાર નીકળવા માટે.

૩.૩ તાપમાન એકમ પસંદગી (°C/°F)

The device allows you to switch between Celsius (°C) and Fahrenheit (°F) display modes. This can be done by flipping the clock over to display temperature, then using the dedicated °C/°F button if available, or by following specific instructions in the operating section.

3. ઓપરેટિંગ સૂચનાઓ

3.1 એલાર્મ સેટ કરવું

1. દબાવો અને પકડી રાખો AL સેટ button (on the back) for 2 seconds until the alarm hour digits flash.
2. નો ઉપયોગ કરો કલાક અને MIN buttons to set your desired alarm time.
3. દબાવો AL સેટ ફરીથી પુષ્ટિ કરવા અને એલાર્મ સેટિંગ મોડમાંથી બહાર નીકળવા માટે.

3.2 એલાર્મ ચાલુ/બંધ

નો ઉપયોગ કરો AL ચાલુ/બંધ switch (on the back) to activate or deactivate the alarm. When the alarm is active, an alarm icon will appear on the display.

3.3 સ્નૂઝ ફંક્શન

When the alarm sounds, gently touch the large સ્નૂઝ button on the top of the clock. This will temporarily silence the alarm for 7 minutes. The snooze function can be repeated up to 3 times.

૨.૪ એડજસ્ટેબલ તેજ

દબાવો ટાઇમ સેટ button for 2 seconds to cycle through 3 levels of brightness: low, middle, and high. The clock also features an automatic night mode, which dims the display between 8:00 PM and 6:00 AM to create a peaceful sleeping environment.

3.5 Switching Between Time and Temperature

To switch between displaying the time and the indoor temperature, simply flip the alarm clock upside down. The display will automatically change to show the current indoor temperature.

3.6 12-Hour / 24-Hour Mode

The clock supports both 12-hour and 24-hour time formats. Refer to the buttons on the back for the specific button to toggle between these modes (e.g., a dedicated ૧૨/૨૪ કલાક બટન).

4. જાળવણી

4.1 બેટરી રિપ્લેસમેન્ટ

The device features a low battery indicator. When this indicator appears, it is time to replace the 2x AA alkaline batteries to ensure continuous operation and accurate readings. The improved design allows batteries to last over 1 year.

4.2 સફાઈ

To clean the clock, use a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.

5. મુશ્કેલીનિવારણ

• ડિસ્પ્લે ફ્લિકરિંગ: If you observe flickering in videos of the product, please note that this is often an artifact of video recording and not indicative of actual product performance. The display is stable in real-life use.
• એલાર્મ વાગતું નથી: ખાતરી કરો AL ચાલુ/બંધ switch is in the 'ON' position. Verify that the alarm time is correctly set. Check the battery level and replace batteries if the low battery indicator is active.
• Incorrect Time/Temperature: Re-set the time following the instructions in Section 2.2. For temperature, ensure the device is placed in a stable indoor environment away from direct heat sources or drafts for accurate readings.
• ઓછી બેટરી સૂચક: This icon signals that the batteries are running low and should be replaced soon.

6. સ્પષ્ટીકરણો

7. વોરંટી અને સપોર્ટ

For warranty information or product support, please contact KWANWA customer service at: support@odokeeshop.com.