1. પરિચય
This manual provides essential information for the installation, operation, and maintenance of your Transcend MTS400S M.2 2242 SATA III Solid State Drive. The MTS400S is designed for high-performance computing in compact form factors, such as Ultrabooks and thin notebooks.
પેકેજ સામગ્રી:
- Transcend MTS400S M.2 SSD
- વોરંટી કાર્ડ
મુખ્ય લક્ષણો:
- Space-saving M.2 Type 2242 form factor
- SATA III 6Gb/s interface
- MLC NAND flash memory for enhanced durability
- DDR3 DRAM cache for improved performance
- Supports DevSleep ultra-low power state
- Supports S.M.A.R.T., TRIM, and NCQ commands
2. સેટઅપ અને ઇન્સ્ટોલેશન
The Transcend MTS400S SSD is an internal component. Installation requires opening your computer case or laptop. If you are unfamiliar with hardware installation, it is recommended to seek assistance from a qualified technician.
સુસંગતતા તપાસ:
Ensure your device has an available M.2 slot that supports the 2242 form factor and SATA III interface. Refer to your device's motherboard or laptop manual for specific M.2 slot details.
સ્થાપન પગલાં:
- તૈયારી: Power off your computer and disconnect all cables. Open the computer case or laptop cover. It is advisable to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
- M.2 સ્લોટ શોધો: તમારા મધરબોર્ડ પર M.2 સ્લોટ ઓળખો. તેની નજીકમાં સામાન્ય રીતે એક નાનો સ્ક્રુ સ્ટેન્ડ-ઓફ હોય છે.
- SSD દાખલ કરો: Gently insert the Transcend MTS400S SSD into the M.2 slot at a slight angle. The gold contacts should slide fully into the slot.
- સુરક્ષિત SSD: Once fully seated, push the SSD down towards the motherboard and secure it with the small screw provided with your motherboard or device.
- ફરીથી એસેમ્બલ કરો: Close your computer case or laptop cover and reconnect all cables.

Image: The Transcend MTS400S M.2 SSD shown installed in a compatible M.2 slot within a laptop, demonstrating its compact size and proper seating.
Initial Setup (for New SSDs):
After physical installation, you may need to initialize and format the SSD in your operating system before it can be used.
- વિન્ડોઝ: Open 'Disk Management' (right-click 'This PC' or 'My Computer' > 'Manage' > 'Disk Management'). Locate the new SSD, initialize it (MBR or GPT, typically GPT for modern systems), and then create a new simple volume.
- મOSકોસ: Use 'Disk Utility' to erase and format the drive.
- Linux: Use tools like GParted or fdisk/mkfs to partition and format the drive.
3. SSD નું સંચાલન
The Transcend MTS400S SSD functions as a standard storage device. It can be used as a primary boot drive for your operating system or as a secondary drive for data storage.
ઑપ્ટિમાઇઝિંગ પ્રદર્શન:
- TRIM આદેશ: Ensure your operating system has TRIM enabled. TRIM helps maintain the performance and longevity of the SSD by allowing the OS to inform the SSD which data blocks are no longer in use and can be wiped internally. Most modern operating systems (Windows 7+, macOS 10.6.8+, Linux kernel 2.6.33+) enable TRIM by default for SSDs.
- DevSleep: The MTS400S supports DevSleep, an ultra-low power state that intelligently shuts down the SATA interface when not in use. This feature helps prolong your device's battery life in portable systems.
- AHCI મોડ: For optimal performance, ensure your system's BIOS/UEFI is configured to use AHCI (Advanced Host Controller Interface) mode for the SATA controller, not IDE mode.
4. જાળવણી
Proper maintenance can help ensure the longevity and optimal performance of your SSD.
- નિયમિત બેકઅપ્સ: While SSDs are generally reliable, it is crucial to regularly back up important data to another storage device.
- ફર્મવેર અપડેટ્સ: Periodically check the Transcend website for any available firmware updates for your MTS400S SSD. Firmware updates can improve performance, stability, and compatibility.
- Transcend SSD Scope Software: Transcend offers a free software utility called SSD Scope. This tool can help monitor the health of your SSD, enable TRIM, securely erase data, and update firmware. It is recommended to download and utilize this software for comprehensive SSD management.
- ડિફ્રેગમેન્ટેશન ટાળો: Unlike traditional hard disk drives, SSDs do not benefit from defragmentation. Defragmenting an SSD can reduce its lifespan without improving performance.
5. મુશ્કેલીનિવારણ
If you encounter issues with your Transcend MTS400S SSD, refer to the following common problems and solutions:
SSD શોધાયેલ નથી:
- શારીરિક જોડાણ તપાસો: Ensure the SSD is correctly seated in the M.2 slot and secured.
- BIOS/UEFI સેટિંગ્સ: Enter your system's BIOS/UEFI setup and verify that the M.2 slot is enabled and configured for SATA mode (not PCIe, if applicable).
- Disk Management (OS): For new SSDs, ensure it has been initialized and formatted in your operating system's disk management utility.
- ડ્રાઇવર અપડેટ્સ: ખાતરી કરો કે તમારા મધરબોર્ડના SATA કંટ્રોલર ડ્રાઇવરો અપ ટુ ડેટ છે.
ધીમી કામગીરી:
- TRIM સ્થિતિ: Verify that TRIM is enabled in your operating system.
- AHCI મોડ: Confirm that your system's BIOS/UEFI is set to AHCI mode for the SATA controller.
- SSD Health: Use Transcend SSD Scope software to check the health and wear-leveling status of your SSD.
- સિસ્ટમ સંસાધનો: ખાતરી કરો કે તમારી સિસ્ટમમાં પૂરતા પ્રમાણમાં RAM અને CPU સંસાધનો છે, કારણ કે આ એકંદર સ્ટોરેજ પ્રદર્શનને અસર કરી શકે છે.
6. સ્પષ્ટીકરણો
Detailed technical specifications for the Transcend MTS400S M.2 2242 SATA III SSD (Model: TS128GMTS400S).

Image: A table summarizing the technical specifications of the Transcend MTS400S SSD, including dimensions, weight, storage media, and performance metrics.
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| મોડલ નંબર | TS128GMTS400S |
| ફોર્મ ફેક્ટર | M.2 2242 |
| ઈન્ટરફેસ | SATA III 6Gb/s |
| ક્ષમતા | 128GB (Other capacities available: 32GB, 64GB, 256GB, 512GB) |
| સ્ટોરેજ મીડિયા | MLC NAND Flash |
| DRAM કેશ | DDR3 |
| ક્રમિક વાંચન ગતિ (મહત્તમ) | 500 MB/s સુધી |
| ક્રમિક લેખન ગતિ (મહત્તમ) | 450 MB/s સુધી |
| 4K Random Read (IOPS) | Up to 70,000 IOPS |
| 4K Random Write (IOPS) | Up to 40,000 IOPS |
| નિષ્ફળતાઓ વચ્ચેનો સરેરાશ સમય (MTBF) | 1,500,000 કલાક |
| ટેરાબાઇટ લખેલ (TBW) | 300 TBW (for 128GB model) |
| ઓપરેટિંગ તાપમાન | 0°C (32°F) ~ 70°C (158°F) |
| સંચાલન ભાગtage | 3.3V ±5% |
| પરિમાણો (L x W x H) | ૨૧૦ મીમી x ૪૩૬ મીમી x ૪૪૬ મીમી (૮.૨૭" x ૧૭.૧૭" x ૧૭.૫૬") |
| વજન | 5 ગ્રામ (0.18 ઔંસ) |
| પ્રમાણપત્રો | CE, FCC, UKCA, BSMI, KC, RCM |
Note: Speed may vary due to host hardware, software, usage, and storage capacity.
7. વોરંટી અને સપોર્ટ
વોરંટી માહિતી:
The Transcend MTS400S SSD comes with a ત્રણ વર્ષની મર્યાદિત વોરંટી. This warranty covers defects in materials and workmanship under normal use. Please refer to the included warranty card for full terms and conditions. The warranty does not apply if SSD Scope's wear-out indicator displays 0% within the warranty coverage period.
ટેકનિકલ સપોર્ટ:
For technical assistance, troubleshooting, or warranty claims, please visit the official Transcend website or contact Transcend customer support. You can find contact information and support resources on their webસાઇટ





