TFA-Dostmann TFA 30.5045.54 Digital Thermo-Hygrometer Instruction Manual

1. પરિચય

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your TFA-Dostmann TFA 30.5045.54 Digital Thermo-Hygrometer. This device is designed to monitor indoor temperature and humidity, featuring a clear display with comfort level indications and trend arrows. It can also function as a remote sensor for compatible TFA devices.

મુખ્ય લાક્ષણિકતાઓમાં શામેલ છે:

• Indoor temperature and humidity display.
• Trend arrows for temperature and humidity values.
• Colored comfort zones for quick climate assessment.
• Max-Min memory function for recorded values.
• Compatibility as a remote sensor for TFA models 30.3054.10, 30.3056.10, and 30.3062.10.

2. પેકેજ સામગ્રી

Please check that all items are present and undamaged:

• TFA 30.5045.54 Digital Thermo-Hygrometer unit

નોંધ: 2 x 1.5V AAA batteries are required for operation and are not included in the package.

3. ઉપકરણ ઓવરview

આકૃતિ 1: આગળ view of the TFA 30.5045.54 Digital Thermo-Hygrometer. The display shows current temperature (21.7°C) and humidity (39%), along with trend indicators and comfort level zones (DRY, COM, WET). Below the display are control buttons: MIN/MAX, CH/+, and SET.

ડિસ્પ્લે તત્વો:

• તાપમાન પ્રદર્શન: Shows current indoor temperature in Celsius. Includes a trend arrow indicating rising, stable, or falling temperature.
• ભેજ પ્રદર્શન: Shows current indoor relative humidity in percentage. Includes a trend arrow indicating rising, stable, or falling humidity.
• Comfort Zones: Colored segments (DRY, COM, WET) indicate the current humidity comfort level.
  • શુષ્ક: 45% થી નીચે ભેજ
  • COM (આરામ): ભેજ 45% અને 65% ની વચ્ચે
  • ભીનું: 65% થી વધુ ભેજ
• CH (Channel) Indicator: Displays the current channel when used with remote sensors.

નિયંત્રણ બટનો:

• MIN / MAX: માટે દબાવો view minimum and maximum recorded temperature and humidity values. Press again to cycle through values. Hold to reset recorded values.
• CH/+: Used to select channels when multiple remote sensors are connected. Also used for increasing values in settings.
• સેટ: Used to enter settings mode or confirm selections.

4. સેટઅપ

4.1 બેટરી ઇન્સ્ટોલેશન

1. યુનિટની પાછળ બેટરી કમ્પાર્ટમેન્ટ કવર શોધો.
2. Remove the cover by sliding it down or lifting it off.
3. Insert two (2) 1.5V AAA batteries, ensuring correct polarity (+ and -).
4. બેટરી કમ્પાર્ટમેન્ટ કવર બદલો.
5. The device will power on automatically and display current temperature and humidity.

4.2 પ્લેસમેન્ટ

The TFA 30.5045.54 Thermo-Hygrometer can be placed on a tabletop or mounted on a wall.

• ટેબલટોપ: Use the integrated stand on the back of the unit to place it on a flat surface.
• દિવાલ-માઉન્ટેડ: Use a screw (not included) to hang the unit from the designated mounting hole on the back.

For accurate readings, place the unit away from direct sunlight, heat sources, and drafts.

5. ઓપરેટિંગ સૂચનાઓ

5.1 Current Readings

Upon power-on, the device immediately displays the current indoor temperature and humidity. The trend arrows next to the temperature and humidity values indicate whether the respective measurement is rising, stable, or falling over a short period.

5.2 Comfort Level Indication

The colored zones at the bottom of the display provide a quick visual reference for the indoor humidity comfort level:

• DRY (Blue): ભેજ 45%થી નીચે છે.
• COM (Green): Humidity is between 45% and 65%, indicating a comfortable range.
• WET (Orange): ભેજ 65%થી ઉપર છે.

5.3 Minimum and Maximum Values

થી view the recorded minimum and maximum temperature and humidity values:

1. દબાવો MIN / MAX button once to display the maximum recorded values.
2. દબાવો MIN / MAX button again to display the minimum recorded values.
3. દબાવો MIN / MAX button a third time to return to current readings.

To reset the minimum and maximum values, press and hold the MIN / MAX button for approximately 3 seconds while the MIN or MAX values are displayed. The display will flash, indicating the values have been reset.

5.4 Remote Sensor Functionality

This unit can function as an additional remote sensor for compatible TFA devices, specifically models 30.3054.10, 30.3056.10 (for temperature and humidity), and 30.3062.10 (for temperature only). Refer to the instruction manual of your main TFA device for details on pairing and channel selection. Use the CH/+ button on this unit to select the appropriate channel if necessary.

6. જાળવણી

6.1 સફાઈ

સોફ્ટ સાથે ઉપકરણને સાફ કરો, ડીamp cloth. Do not use abrasive cleaning agents or solvents, as these may damage the display or casing. Avoid getting moisture into the device's internal components.

6.2 બેટરી રિપ્લેસમેન્ટ

When the battery indicator appears on the display, replace the batteries. Follow the steps in Section 4.1 Battery Installation. Dispose of used batteries according to local regulations.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

• મોડલ: 30.5045.54
• તાપમાન શ્રેણી: 0°C થી +60°C (32°F થી 140°F)
• તાપમાન રીઝોલ્યુશન: 0.1°C
• ભેજની રેન્જ: 10% થી 99% આરએચ
• શક્તિ: 2 x 1.5V AAA બેટરી (શામેલ નથી)
• પરિમાણો: 64 x 109 x 18 mm (2.52 x 4.29 x 0.71 ઇંચ)
• વજન: 65 ગ્રામ (2.29 ઔંસ)
• માઉન્ટ કરવાનો પ્રકાર: ટેબલટોપ અથવા વોલ-માઉન્ટેડ
• ઉત્પાદક: TFA દોસ્તમેન

9. વોરંટી અને સપોર્ટ

વોરંટી માહિતી અથવા તકનીકી સહાય માટે, કૃપા કરીને તમારી ખરીદી સાથે પૂરા પાડવામાં આવેલ દસ્તાવેજોનો સંદર્ભ લો અથવા તમારા રિટેલરનો સંપર્ક કરો. કોઈપણ વોરંટી દાવા માટે ખરીદીનો પુરાવો રાખો.