1. પરિચય
The OSRAM eldoLED Optotronic LED Driver OT Programmer is a specialized tool designed for programming single, non-DALI OPTOTRONIC LED drivers. This device facilitates quick and efficient configuration of LED drivers using the Tuner4TRONIC software via a standard USB interface. It allows for programming without the need to apply mains voltage to the driver, streamlining the setup process for professional lighting installations.
This manual provides essential information for the safe and effective use of your OT Programmer, including setup, operation, maintenance, and technical specifications.
Image 1.1: eldoLED Optotronic OT Programmer with a connected programming cable, showing the USB and programming ports.
2. સલામતી માહિતી
ઉપકરણ ચલાવતા પહેલા કૃપા કરીને બધી સલામતી સૂચનાઓ વાંચો અને સમજો. આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ઇલેક્ટ્રિક શોક, આગ અથવા ગંભીર ઈજાનું કારણ બની શકે છે.
- ફક્ત લાયક વ્યાવસાયિકો: This device is intended to be used by qualified professionals only.
- સૂચનાઓ વાંચો: Always read the complete installation and operating instructions before use.
- No AC Connection: Do not connect the OT Programmer to an AC (mains) line. The unit is powered exclusively through its USB port.
- ઓપરેટિંગ તાપમાન: Ensure the ambient temperature range is between 0°C and +50°C (32°F to 122°F) during operation.
- સુસંગતતા: This programmer is suitable only for non-DALI OPTOTRONIC devices that utilize the Prog +/- interface.
The device complies with FCC 47 CFR part 15, Class A, IEC 60950-1, and IEC 55022 standards.
3. સેટઅપ
Follow these steps to set up your OT Programmer for use:
3.1. સૉફ્ટવેર ઇન્સ્ટોલેશન
The OT Programmer requires the Tuner4TRONIC software for operation. This software is essential for configuring your LED drivers.
- સૉફ્ટવેર ડાઉનલોડ કરો: Obtain the latest version of the Tuner4TRONIC software from the official eldoLED webસાઇટ મુલાકાત www.eldoLED.com/contact for download links and support.
- સૉફ્ટવેર ઇન્સ્ટોલ કરો: Follow the on-screen instructions to install Tuner4TRONIC on your computer.
3.2. Connecting the Programmer
The OT Programmer is powered and communicates via a standard USB connection.
- કમ્પ્યુટરથી કનેક્ટ કરો: Use a standard USB cable to connect the OT Programmer to an available USB 2.0 port on your computer. The unit will power on automatically.
- Connect to LED Driver: Connect the programming cable from the OT Programmer's "Program (+)/(-)" interface to the corresponding Prog +/- interface on the non-DALI OPTOTRONIC LED driver you wish to program.
છબી ૧.૧: ટોચ view of the eldoLED Optotronic OT Programmer, highlighting the USB 2.0 port and the Program (+)/(-) interface.
4. ઓપરેટિંગ સૂચનાઓ
Once the hardware is connected and the Tuner4TRONIC software is installed, you can proceed with programming your LED drivers.
- Launch Tuner4TRONIC: Open the Tuner4TRONIC software on your computer.
- ઉપકરણ ઓળખ: The software should automatically detect the connected OT Programmer and the LED driver. If not, check your connections and ensure the software is up to date.
- Configure Driver: Use the Tuner4TRONIC interface to select the desired parameters and settings for your OPTOTRONIC LED driver.
- Program Driver: Initiate the programming process through the software. The OT Programmer will transfer the settings to the LED driver. This process is typically very fast.
- સેટિંગ્સ ચકાસો: After programming, it is recommended to verify the settings within the Tuner4TRONIC software to ensure successful configuration.
5. જાળવણી
The OT Programmer is designed for durability and requires minimal maintenance.
- સફાઈ: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
- સંગ્રહ: Store the programmer in a dry, cool environment when not in use.
- કેબલ કેર: Handle USB and programming cables with care to prevent damage to connectors and wires.
6. મુશ્કેલીનિવારણ
If you encounter issues with your OT Programmer, refer to the following common troubleshooting steps:
- Programmer Not Recognized:
- Ensure the USB cable is securely connected to both the programmer and the computer.
- તમારા કમ્પ્યુટર પર એક અલગ USB પોર્ટ અજમાવી જુઓ.
- Verify that the Tuner4TRONIC software is correctly installed and up to date.
- તમારા કમ્પ્યુટરને ફરીથી પ્રારંભ કરો.
- LED Driver Not Detected:
- Confirm that the programming cable is correctly connected to the Prog +/- interface of the LED driver.
- Ensure the LED driver is a compatible non-DALI OPTOTRONIC device with the Prog +/- interface.
- Check for any physical damage to the programming cable or the driver's interface.
- પ્રોગ્રામિંગ ભૂલો:
- Refer to the Tuner4TRONIC software documentation for specific error codes and solutions.
- Ensure the LED driver is in a ready state for programming.
For persistent issues, contact customer support as detailed in Section 8.
7. સ્પષ્ટીકરણો
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| મોડલ નંબર | 4052899209640 |
| ભાગ નંબર | 4052899209640 |
| નામાંકિત ભાગtage | 5.00 V (USB powered) |
| મુખ્ય આવર્તન | 0 Hz (Not connected to AC) |
| ઉત્પાદનના પરિમાણો (L x W x H) | 4.7 x 3 x 1.1 ઇંચ (119.4 x 76.2 x 27.9 mm) |
| ઉત્પાદન વજન | 4 ઔંસ (113.4 ગ્રામ) |
| આસપાસના તાપમાન શ્રેણી | 0°C થી +50°C (32°F થી 122°F) |
| સામગ્રી | તાંબુ (આંતરિક ઘટકો) |
| ઈન્ટરફેસ | USB 2.0, Prog +/- |
| સુસંગતતા | Non-DALI OPTOTRONIC devices with Prog +/- interface |
| જરૂરી સ Softwareફ્ટવેર | Tuner4TRONIC |
8. વોરંટી અને સપોર્ટ
For warranty information and technical support, please refer to the official OSRAM or eldoLED website. You can typically find detailed warranty terms and contact information for support services at www.eldoLED.com/contact or through your local OSRAM/eldoLED distributor.
સપોર્ટનો સંપર્ક કરતી વખતે, કૃપા કરીને તમારા ઉત્પાદન મોડેલ નંબર (૧૨૬૪૭૫) અને કોઈપણ સંબંધિત ખરીદી માહિતી તૈયાર રાખો.
