યાકીમા બેકસ્વિંગ હિચ માઉન્ટ સ્વિંગ અવે રેક એડેપ્ટર વપરાશકર્તા માર્ગદર્શિકા

ઉત્પાદન ઓવરview

The Yakima BackSwing is a versatile hitch mount swing-away rack adapter designed to transform most 2-inch hitch products into a free-swinging hitch rack. This allows for easy access to your vehicle's tailgate, even when a bike rack or other gear is fully loaded. It is built for convenience and security, supporting up to 250 pounds of total load (hitch product plus gear).

Image: The Yakima BackSwing Hitch Mount Swing Away Rack Adapter, a black, robust accessory designed to extend and swing out from a vehicle's hitch receiver.

મુખ્ય લક્ષણો:

• Hitch Rack Swing Adapter: Transforms most 2-inch hitch products into a swing-away rack for easy tailgate access.
• અનુકૂળ ડિઝાઇન: Swings open 90 degrees and locks in place with a simple release lever.
• સુરક્ષા: Features a safety latch and SKS (Same Key System) locks for secure travel.
• લોડ ક્ષમતા: Supports up to 250 pounds (total weight of hitch product + gear).
• સુસંગતતા: Fits most 2-inch hitch racks, including specific Yakima models like HangOver 4, HangTight 4, StageTwo 2”, HoldUp 2”, OnRamp 2”, SingleSpeed, FourTimer, TwoTimer 2”, LongHaul, RoadTrip (Vans and Passenger Vehicles Only), and Dr.Tray 2” (without EZ+1 attached). Not compatible with RVs, campers, or travel trailers.

Image: Diagram highlighting the BackSwing's compact profile, anti-theft SKS lock, and hitch extension capability.

સેટઅપ અને ઇન્સ્ટોલેશન

Follow these steps to properly install your Yakima BackSwing adapter and attach your hitch product.

1. Insert into Receiver: Slide the BackSwing into your vehicle's 2-inch hitch receiver.
2. Secure with Threaded Bolt: Use the provided threaded bolt to secure the BackSwing firmly into the receiver. Tighten until snug to minimize movement.
3. Lock the Connection: Utilize the included SKS (Same Key System) hitch lock to secure the threaded bolt, preventing theft and ensuring a stable connection.
4. Attach Hitch Product: Once the BackSwing is securely installed, insert your approved 2-inch hitch product (e.g., bike rack) into the BackSwing's receiver.
5. Load Gear: Load your gear onto the attached hitch product. Ensure the total weight (hitch product + gear) does not exceed 250 pounds.

Image: Visual guide showing the installation process, including securing the adapter with a threaded pin and the safety latch mechanism.

સ્થાપન વિડિઓ:

ઓપરેટિંગ સૂચનાઓ

The BackSwing allows for convenient access to your vehicle's rear cargo area. Follow these steps to swing your rack away:

1. રીલીઝ લીવર: Locate the release lever on the BackSwing. Lift the lever to disengage the primary lock.
2. ઓપન લેચ: Open the safety latch mechanism.
3. Pull Spring Pin: Pull the spring pin to allow the swing arm to move freely.
4. Swing Open: Gently swing the entire assembly (BackSwing + attached rack + gear) away from your vehicle. It will lock out at a 90-degree angle, providing ample clearance for tailgate access.
5. Access Tailgate: With the rack swung open, you can now easily open your tailgate or rear doors to access coolers, snacks, or other items.
6. બંધ અને સુરક્ષિત: When finished, release the lever, swing the assembly back towards the vehicle until it clicks into place, and close the latch securely.

Image: A person accessing the rear of a vehicle with a bike rack swung away using the Yakima BackSwing, demonstrating effortless access.

Image: A group of people relaxing by their vehicle, with bikes mounted on the BackSwing adapter, which is swung open to allow access to the tailgate.

જાળવણી

Regular maintenance will ensure the longevity and optimal performance of your Yakima BackSwing adapter.

• નિયમિતપણે સાફ કરો: Clean the adapter periodically with mild soap and water to remove dirt, road grime, and salt. Rinse thoroughly and dry.
• કનેક્શન્સ તપાસો: Before each use, check all bolts and connections, especially the threaded bolt securing the BackSwing to the hitch receiver and the connection to your hitch product. Ensure they are tight and secure.
• ફરતા ભાગોને લુબ્રિકેટ કરો: Apply a silicone-based lubricant to the hinge points and the spring pin mechanism annually, or more frequently if used in harsh conditions, to ensure smooth operation.
• નુકસાન માટે તપાસો: Inspect the adapter for any signs of wear, corrosion, cracks, or deformation. Do not use if any significant damage is observed.
• યોગ્ય રીતે સ્ટોર કરો: When not in use, store the BackSwing in a dry, protected area to prevent rust and damage.

મુશ્કેલીનિવારણ

If you encounter any issues with your Yakima BackSwing, refer to the following common troubleshooting tips:

વિશિષ્ટતાઓ

• મોડલ નામ: 8002483 (BackSwing)
• રંગ: કાળો
• આઇટમના પરિમાણો (L x W x H): 20 x 30 x 8 ઇંચ
• પેકેજ વજન: ૦.૯ કિલોગ્રામ (આશરે ૨ પાઉન્ડ)
• લોડ ક્ષમતા: 250 Pounds (total weight of hitch product + gear)
• માઉન્ટ કરવાનો પ્રકાર: Hitch Mount (2-inch receivers)
• ઉત્પાદક: યાકીમા
• યુપીસી: 736745024833

Image: The Yakima BackSwing with callouts for its dimensions (20" L x 30" W x 8" H) and weight (35.46 lbs), along with its maximum load capacity of 250 lbs.

વોરંટી અને આધાર

The Yakima BackSwing is backed by a manufacturer's limited-lifetime warranty. For detailed warranty information or to register your product, please visit the official Yakima webસાઇટ

• ઇન્સ્ટોલેશન મેન્યુઅલ (PDF): For a downloadable PDF version of the installation manual, please refer to: https://manuals.plus/m/e1418984b916d057febb4d6bd364bad1f438fc2304fb0b10b2be4a5b624786ba
• Visit the YAKIMA Store: Explore other Yakima products and accessories at their official store: https://www.amazon.com/stores/Yakima/page/FB2B094C-2DE4-422B-8FE2-0791DE1EBD4C