Uponor 1086974

Uponor Smatrix Base T-145 Wired Room Thermostat User Manual

1. ઉત્પાદન ઓવરview

The Uponor Smatrix Base T-145 is a wired digital room thermostat designed for precise temperature control in heating and cooling systems, particularly underfloor heating. It directly transmits measured values to the Smatrix Base X-145 control module, ensuring efficient and responsive climate management. This thermostat features a clear digital display for easy temperature adjustment and monitoring.

Uponor Smatrix Base T-145 Wired Room Thermostat

છબી 1.1: આગળ view of the Uponor Smatrix Base T-145 Wired Room Thermostat, showing its square white casing and central rotary dial for temperature adjustment. The 'Uponor' logo is visible at the bottom left.

2. મુખ્ય લક્ષણો

3. ટેકનિકલ વિશિષ્ટતાઓ

બ્રાન્ડઅપોનોર
મોડલ નંબર1086974
રંગસફેદ (RAL 9016)
પરિમાણો (H x W x D)80 x 80 x 26.5 મીમી
વસ્તુનું વજન120 ગ્રામ
પાવર સપ્લાય4-wire bus (Wired)
ભાગtage24 વોલ્ટ
કનેક્ટિવિટી ટેકનોલોજીવાયર્ડ
રક્ષણ વર્ગઆઈપી 30
અનુપાલનCE
નિયંત્રક પ્રકારમેન્યુઅલ નિયંત્રણ
તાપમાન નિયંત્રણ પ્રકારડિજિટલ
ચોક્કસ ઉપયોગોઅન્ડરફૂર હીટીંગ
સમાવાયેલ ઘટકોRoom thermostat and mounting hardware

4. સલામતી માહિતી

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.

5. સ્થાપન અને સેટઅપ

The Uponor Smatrix Base T-145 thermostat is a wired device requiring connection to an Uponor Smatrix Base X-145 control module via a 4-wire bus system. Professional installation is recommended.

5.1 માઉન્ટ કરવાનું

  1. પાવર ડિસ્કનેક્શન: Ensure the main power supply to the heating/cooling system is turned off at the circuit breaker before beginning installation.
  2. સ્થાન પસંદગી: Choose an indoor location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., lamps, appliances) that could affect temperature readings. Mount at a standard thermostat height (approximately 1.5 meters from the floor).
  3. વાયરિંગ: Connect the 4-wire bus cable from the Smatrix Base X-145 control module to the designated terminals on the T-145 thermostat. Refer to the wiring diagram provided with the Smatrix Base X-145 control module for specific terminal assignments.
  4. સુરક્ષિત માઉન્ટિંગ: Use the provided mounting hardware to securely attach the thermostat to the wall.

5.2 પ્રારંભિક સેટઅપ

  1. પાવર ચાલુ: Restore power to the system at the circuit breaker. The thermostat display should illuminate.
  2. Software Version Check: Upon initial power-up, the software version will briefly display.
  3. તાપમાન એકમ: If necessary, adjust the temperature unit between Celsius and Fahrenheit according to the operating instructions in Section 6.
  4. સેન્સર રૂપરેખાંકન: If using optional floor, remote, or outdoor sensors, ensure they are correctly connected and configured within the Smatrix Base X-145 control module. The thermostat can display readings from these sensors.

6. ઓપરેશન

The Uponor Smatrix Base T-145 thermostat provides straightforward control over your room's temperature.

6.1 તાપમાન સેટ કરવું

6.2 માહિતી દર્શાવો

6.3 Changing Temperature Units (Celsius/Fahrenheit)

Specific instructions for changing temperature units are typically found in the main Smatrix Base X-145 control module manual or accessed via a combination of button presses on the thermostat. Consult the comprehensive system manual for detailed steps.

7. જાળવણી

The Uponor Smatrix Base T-145 thermostat requires minimal maintenance to ensure optimal performance.

8. મુશ્કેલીનિવારણ

If you encounter issues with your Uponor Smatrix Base T-145 thermostat, refer to the following common problems and solutions:

સમસ્યાસંભવિત કારણઉકેલ
ડિસ્પ્લે ખાલી છે અથવા પ્રતિભાવ આપતું નથી.No power to the thermostat or control module.Check the main power supply and circuit breaker. Ensure the 4-wire bus connection is secure.
ખોટું તાપમાન વાંચન.ડ્રાફ્ટ્સ, સીધા સૂર્યપ્રકાશ અથવા ગરમીના સ્ત્રોતોથી પ્રભાવિત થર્મોસ્ટેટ સ્થાન.Relocate the thermostat if possible, or shield it from interfering elements. Ensure no external sensors are faulty or obstructed.
હીટિંગ/કૂલિંગ સિસ્ટમ કામ કરી રહી નથી.Communication issue with Smatrix Base X-145 control module or system fault.Verify the 4-wire bus connection. Check the Smatrix Base X-145 control module for error indicators. Consult the Smatrix Base X-145 manual for system-level troubleshooting.
Setback function not working as expected.Incorrect configuration in the Smatrix Base X-145 control module.Review the setback schedule and settings within the Smatrix Base X-145 control module.

If the problem persists after attempting these solutions, contact Uponor customer support or a qualified HVAC technician.

9. વોરંટી અને સપોર્ટ

For warranty information, technical support, or service inquiries regarding your Uponor Smatrix Base T-145 Wired Room Thermostat, please refer to the documentation included with your complete Uponor Smatrix system or visit the official Uponor webસાઇટ. વોરંટી દાવાઓ માટે તમારી ખરીદીનો પુરાવો રાખો.

ઉત્પાદક: અપોનોર

મોડલ નંબર: 1086974

ASIN: B077CLZPJ8