eufy BoostIQ RoboVac 11S (સ્લિમ) રોબોટ વેક્યુમ ક્લીનર વપરાશકર્તા માર્ગદર્શિકા

પરિચય

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your eufy BoostIQ RoboVac 11S (Slim) robot vacuum cleaner. Please read this manual thoroughly before using your RoboVac and retain it for future reference.

મહત્વપૂર્ણ સલામતી સૂચનાઓ

Always follow basic precautions, including:

• ઉપકરણનો ઉપયોગ કરતા પહેલા બધી સૂચનાઓ વાંચો.
• Do not operate the RoboVac in areas with open flames or flammable materials.
• વાળ, ઢીલા કપડાં, આંગળીઓ અને શરીરના તમામ ભાગોને ખુલ્લા અને હલનચલનથી દૂર રાખો.
• આ માર્ગદર્શિકામાં વર્ણવ્યા મુજબ જ ઉપયોગ કરો.
• જગ્યાએ ડસ્ટ બિન અને/અથવા ફિલ્ટર વગર ઉપયોગ કરશો નહીં.
• બાળકોને ઉપકરણ સાથે રમવાની મંજૂરી આપશો નહીં.
• ઉત્પાદક દ્વારા પૂરા પાડવામાં આવેલ પાવર એડેપ્ટરનો જ ઉપયોગ કરો.
• Do not use the appliance to pick up large debris, liquids, or sharp objects.

પેકેજ સામગ્રી

• 1 x eufy BoostIQ RoboVac 11S (Slim)
• 1 x Remote control (AAA batteries included)
• 1 x Charging Base & Power Adapter
• 1 x સફાઈ સાધન
• 2 x Side Brushes (additional pair)
• 1 x Filter Set (additional set)
• 1 x વપરાશકર્તા માર્ગદર્શિકા
• 1 x ઝડપી પ્રારંભ માર્ગદર્શિકા
• 1 x વોરંટી માહિતી

સેટઅપ

1. Prepare the RoboVac

• રોબોવેક અને ચાર્જિંગ બેઝ પરથી બધી રક્ષણાત્મક ફિલ્મો અને સ્ટીકરો દૂર કરો.
• Attach the side brushes by pressing them onto the square posts until they click.

2. Install the Charging Base

Place the charging base on a hard, level surface against a wall. Ensure there is at least 3 feet (1 meter) of clear space to either side and 6 feet (2 meters) in front of the charging base. Connect the power adapter to the charging base and a wall outlet. The indicator light on the charging base will illuminate.

Image: RoboVac automatically returning to its charging base.

૪. પ્રારંભિક ચાર્જ

Place the RoboVac onto the charging base, ensuring the charging pins align. For first-time use, charge the RoboVac for at least 12 hours. The indicator light on the RoboVac will breathe orange while charging and turn solid blue when fully charged.

Operating Your RoboVac

1. પાવર ચાલુ/બંધ

Press and hold the power button on the RoboVac for 3 seconds to turn it on or off. The indicator light will turn blue when on.

2. સફાઈ મોડ્સ

The RoboVac offers several cleaning modes, selectable via the remote control:

• સ્વતઃ સફાઈ: The RoboVac cleans automatically using various cleaning patterns. This is the default mode.
• સ્પોટ સફાઈ: For concentrated cleaning of a specific area. The RoboVac will clean in a spiral pattern for approximately 2 minutes.
• ધારની સફાઈ: The RoboVac cleans along walls and furniture edges.
• એક રૂમની સફાઇ: The RoboVac cleans a single room and then returns to its charging base.

Image: Remote control for selecting cleaning modes and scheduling.

3. BoostIQ Technology

The RoboVac automatically increases suction power when extra vacuuming strength is needed, such as when transitioning from hard floors to carpets. This feature activates in approximately 1.5 seconds.

Image: RoboVac activating BoostIQ for increased suction on carpet.

૧. સમયપત્રક

Use the remote control to set a cleaning schedule for your RoboVac. Refer to the remote control section in the full manual for detailed instructions on setting schedules.

જાળવણી

Regular maintenance ensures optimal performance of your RoboVac.

૧. ડસ્ટબિન ખાલી કરવી

Empty the dust bin after each use. Press the dust bin release button and pull out the bin. Open the dust bin cover and discard debris.

Image: The dust bin removed from the RoboVac, showing collected debris.

2. ફિલ્ટર્સની સફાઈ

Remove the filters from the dust bin. Tap them to remove dust and rinse them under running water. Allow filters to air dry completely before reinstalling. Replace filters every 3-6 months, or as needed.

Image: Diagram illustrating the multi-layer filter system of the RoboVac.

3. Cleaning the Rolling Brush and Side Brushes

Remove the rolling brush cover and lift out the rolling brush. Use the cleaning tool to remove hair and debris. Clean the side brushes by pulling them off and removing any tangled hair or debris. Replace worn side brushes.

4. Cleaning the Sensors and Charging Contacts

Wipe the drop sensors, charging contacts, and swivel wheel with a dry cloth to maintain proper function.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

વોરંટી અને આધાર

Your eufy BoostIQ RoboVac 11S (Slim) comes with a 12-મહિનાની વોરંટી. For technical support, warranty claims, or additional information, please refer to the warranty information card included in your package or visit the official eufy support webસાઇટ