1. પરિચય
The Enbrighten Direct Wire Converter (Model 39971) is designed to integrate Enbrighten plug-in, linkable light fixtures into an existing electrical circuit. This allows for control of multiple linked lights from a single wall switch, eliminating visible power cords and freeing up electrical outlets. This manual provides essential information for safe installation, operation, and maintenance of your direct wire converter.
Image: Enbrighten Direct Wire Converter, Model 39971. This image shows the overall appearance of the white rectangular converter box.
2. મહત્વપૂર્ણ સલામતી માહિતી
WARNING: RISK OF ELECTRIC SHOCK. INSTALLATION SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN OR LICENSED PROFESSIONAL. ALWAYS TURN OFF POWER AT THE CIRCUIT BREAKER BEFORE INSTALLATION.
- ઇન્સ્ટોલેશન અને ઉપયોગ કરતા પહેલા બધી સૂચનાઓ વાંચો.
- આ ઉત્પાદન માત્ર ઇન્ડોર ઉપયોગ માટે બનાવાયેલ છે.
- Ensure the power supply is disconnected at the circuit breaker or fuse box before beginning any electrical work.
- ચકાસો કે વોલ્યુમtage of your electrical supply matches the product's specifications (120V AC).
- Do not exceed the maximum electrical rating of 250V, max 10A.
- શુષ્ક અથવા ડી માટે યોગ્યamp locations. Do not install in locations exposed to direct water spray or submersion.
- Do not connect or disconnect under load (i.e., with power on).
- All wiring must conform to national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Use only with compatible Enbrighten linkable puck and bar fixtures.
3. પેકેજ સામગ્રી
Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, contact customer support before proceeding with installation.
- Enbrighten Direct Wire Converter (1 unit)
- માઉન્ટિંગ સ્ક્રૂ
- Wire Connectors (Wire Nuts)
- તાણ રાહત કનેક્ટર
Image: Front packaging of the Enbrighten Direct Wire Converter. This image illustrates the product and its primary function of converting plug-in fixtures to direct wire.
4. સેટઅપ અને ઇન્સ્ટોલેશન
This section outlines the steps for installing the Enbrighten Direct Wire Converter. Ensure all safety precautions are followed.
જરૂરી સાધનો (શામેલ નથી):
- ફિલિપ્સ હેડ સ્ક્રુડ્રાઈવર
- વાયર સ્ટ્રિપર્સ
- Drill with 1/16" or 3/32" drill bit (for mounting)
- સલામતી ચશ્મા
Image: Back packaging of the Enbrighten Direct Wire Converter. This image displays the 'Tools needed' section and a simplified wiring diagram for installation.
સ્થાપન પગલાં:
- પાવર બંધ કરો: Locate the circuit breaker controlling the area where you will install the converter and turn off the power. Verify power is off using a voltage પરીક્ષક.
- માઉન્ટ કરવાનું સ્થાન તૈયાર કરો: Choose a suitable, dry location for the converter box, typically inside a cabinet or under a counter, close to the intended light fixtures.
- Mount the Converter Box: Use the provided mounting screws to securely attach the converter box to the desired surface. Pre-drill pilot holes if necessary.
- વાયરિંગ તૈયાર કરો:
- Carefully remove a knockout from the converter box for your incoming electrical supply wire.
- Insert the electrical supply wire (e.g., Romex) through the knockout and secure it with the provided strain relief connector.
- Strip approximately 1/2 inch of insulation from the ends of the supply wires (black, white, and bare copper/green ground).
- વાયર જોડાણો:
- કનેક્ટ કરો black (hot) wire from your electrical supply to the કાળા વાયર inside the converter box using a wire connector.
- કનેક્ટ કરો white (neutral) wire from your electrical supply to the સફેદ વાયર inside the converter box using a wire connector.
- કનેક્ટ કરો bare copper or green (ground) wire from your electrical supply to the લીલા વાયર inside the converter box using a wire connector.
- Ensure all connections are secure and no bare wire is exposed outside the wire connectors.
- Connect to Light Fixtures: The converter box has output ports designed for Enbrighten linkable light fixtures. Plug the linking cables from your Enbrighten light fixtures directly into these ports. Ensure a secure connection.
- Close the Box: Carefully tuck all wires into the converter box and secure the cover with the screws.
- પાવર પુન Restસ્થાપિત કરો: સર્કિટ બ્રેકર પર પાવર ફરીથી ચાલુ કરો.
- ટેસ્ટ: Operate your wall switch to confirm that the connected Enbrighten light fixtures turn on and off correctly.
છબી: આગળ view of the Enbrighten Direct Wire Converter. This shows the input and output ports for connecting to electrical wiring and linkable fixtures.
છબી: બાજુ view of the Enbrighten Direct Wire Converter. This angle highlights the compact design and mounting tabs.
5. ઓપરેશન
Once properly installed, the Enbrighten Direct Wire Converter allows you to control all connected Enbrighten linkable light fixtures from a single wall switch. Simply toggle the wall switch to turn the lights ON or OFF.
The converter itself does not have any user-operable controls. Its function is to provide a hardwired power source for your linkable lighting system.
6. જાળવણી
The Enbrighten Direct Wire Converter requires minimal maintenance.
- સફાઈ: Ensure power is off at the circuit breaker before cleaning. Wipe the exterior of the converter box with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- નિરીક્ષણ: Periodically inspect the converter and its connections for any signs of damage, loose wires, or overheating. If any issues are found, turn off power immediately and consult a qualified electrician.
- કોઈ વપરાશકર્તા-સેવાયોગ્ય ભાગો નથી: The converter contains no user-serviceable parts. Do not attempt to open or repair the unit.
7. મુશ્કેલીનિવારણ
If you experience issues with your Enbrighten Direct Wire Converter, refer to the following common problems and solutions:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| લાઈટો ચાલુ થતી નથી. | No power to the converter. | Check the circuit breaker and ensure it is ON. Verify all wire connections are secure. |
| લાઇટો ઝબકતી હોય છે અથવા ઝાંખી હોય છે. | Loose wire connection or incompatible fixtures. | Turn off power and check all wire connections. Ensure you are using compatible Enbrighten linkable fixtures. |
| Converter box feels warm. | Normal operation or overloaded circuit. | A slight warmth is normal. If it feels excessively hot, turn off power immediately and consult an electrician. Ensure the total wattage of connected lights does not exceed the converter's rating. |
| Only some lights turn on. | Loose connection between light fixtures. | Turn off power and check the linking cable connections between the light fixtures and to the converter. |
If troubleshooting steps do not resolve the issue, contact customer support or a qualified electrician.
8. સ્પષ્ટીકરણો
- મોડલ નંબર: 39971
- ભાગtage: 120 વોલ્ટ (AC)
- મહત્તમ વર્તમાન: 10 Amps
- મહત્તમ સુસંગત પ્રકાશ સ્ત્રોત વાટtage: 4.5 Watts (per fixture, ensure total does not exceed 10A circuit capacity)
- સામગ્રી: પ્લાસ્ટિક
- રંગ: સફેદ
- ઉત્પાદન પરિમાણો: ૧૧"લિ x ૪"પગ x ૧૩"કલો
- માઉન્ટ કરવાનો પ્રકાર: Screw On
- સુસંગતતા: Enbrighten linkable puck and bar fixtures
- પ્રમાણપત્રો: UL લિસ્ટેડ (E218874)
Image: Close-up of the product label on the Enbrighten Direct Wire Converter. This label provides UL listing information, electrical ratings, and contact details.
9. વોરંટી અને સપોર્ટ
This Enbrighten product comes with a limited-lifetime warranty, ensuring reliability for years to come. For detailed warranty information, please visit the manufacturer's webસાઇટ પર જાઓ અથવા ઉત્પાદન પેકેજિંગનો સંદર્ભ લો.
For technical support, questions, or warranty claims, please contact Jasco Products Company, LLC, the manufacturer of Enbrighten products.
- ઉત્પાદક: Jasco પ્રોડક્ટ્સ કંપની, LLC
- Webસાઇટ: www.byjasco.com
- ગ્રાહક સેવા ફોન: 1-800-654-8483 (7:00 AM – 8:00 PM CST)
