PROEL V10PLUS Monitor Speaker User Manual

1. પરિચય

The PROEL V10PLUS is a high-performance, bi-amplified 2-way monitor speaker designed for professional audio applications. It integrates a powerful 600W Class D + AB amplifier with Switch-Mode Power Supply (SMPS) technology, ensuring efficient and clear sound reproduction. Its lightweight, reinforced polypropylene cabinet and ergonomic handle provide excellent portability, while its trapezoidal shape allows for versatile use as a stage monitor or for fixed installations.

2. મુખ્ય લક્ષણો

• દ્વિ-amplified 2-way design: Features a 1-inch neodymium compression driver and a 10-inch woofer with a 2-inch voice coil.
• શક્તિશાળી Ampલિફિકેશન: 600W total power (Class D + AB amplifier with SMPS).
• Integrated Active Processor: Includes a dual LIMITER circuit for undistorted sound even at high levels.
• બહુમુખી ઇનપુટ્સ: MIC/LINE input with two-band EQ for flexible audio source connection.
• સ્થિતિ સૂચકાંકો: Front LED for power (ON) and signal/clip indication.
• ઉચ્ચ આઉટપુટ: Maximum SPL of 123dB.
• વ્યાપક આવર્તન પ્રતિસાદ: 60Hz - 20kHz.
• ટકાઉ અને પોર્ટેબલ ડિઝાઇન: Ultralight reinforced polypropylene cabinet with a comfortable carry handle.
• લવચીક પ્લેસમેન્ટ: Trapezoidal shape for use as a stage monitor and four M10 suspension points for installation.
• કોમ્પેક્ટ અને હલકો: Product dimensions of 25 x 35 x 30 cm and a total weight of 10 kg.

3. સેટઅપ

Proper setup ensures optimal performance and longevity of your PROEL V10PLUS speaker. Follow these steps for initial configuration:

3.1 અનપેકિંગ અને નિરીક્ષણ

Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.

3.2 પ્લેસમેન્ટ

The V10PLUS is designed for various applications:

• ફ્લોર મોનિટર: Position the speaker on the floor using its angled profile એસ માટેtagઇ મોનીટરીંગ.
• સ્પીકર સ્ટેન્ડ: Utilize the integrated pole mount socket on the bottom of the speaker to mount it on a standard speaker stand.
• સસ્પેન્શન: Use the four M10 suspension points for fixed installations. Ensure proper rigging hardware and safety procedures are followed by qualified personnel.

Figure 3.2.1: PROEL V10PLUS in stage monitor position.

3.3 જોડાણો

Refer to the rear panel image for connection points.

Figure 3.3.1: Rear panel connections and controls.

1. પાવર કનેક્શન: Connect the supplied AC power cable to the POWER input on the rear panel and then to a suitable electrical outlet. Ensure the voltage matches the speaker's requirements (220-240V~ 50/60Hz).
2. ઓડિયો ઇનપુટ: Connect your audio source (mixer, microphone, instrument) to the INPUT section. The V10PLUS features a combo XLR/TRS input.
• For microphone signals, use the MIC/LINE switch to select 'MIC'.
• For line-level signals (e.g., from a mixer), select 'LINE'.
3. લિંક આઉટપુટ: The LINK output (XLR) allows you to send the input signal to another V10PLUS speaker or another audio device.

4. ઓપરેટિંગ સૂચનાઓ

Once connected, follow these steps to operate your PROEL V10PLUS speaker:

1. પાવર ચાલુ: Ensure all connections are secure and the LEVEL knob is set to minimum. Flip the POWER switch to the 'ON' position. The front LED will illuminate to indicate power.
2. ઇનપુટ પસંદગી: Set the MIC/LINE switch according to your input source (MIC for microphones, LINE for line-level devices).
3. વોલ્યુમ એડજસ્ટમેન્ટ: Slowly increase the LEVEL knob to achieve the desired volume. Monitor the front LED: it should primarily show 'SIGNAL' (green). If it frequently shows 'CLIP' (red), reduce the input level from your source or the speaker's LEVEL knob to prevent distortion.
4. સ્વર નિયંત્રણ: Use the HIGH and LOW EQ knobs to adjust the treble and bass frequencies to suit your preference or acoustic environment.
5. પાવર બંધ: Before disconnecting power or cables, turn the LEVEL knob to minimum and then flip the POWER switch to 'OFF'.

5. જાળવણી

Regular maintenance helps preserve the performance and appearance of your speaker.

• સફાઈ: Use a soft, dry cloth to clean the cabinet. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes.
• ગ્રિલ સફાઈ: The metal grille can be gently cleaned with a soft brush or vacuum cleaner to remove dust.
• સંગ્રહ: When not in use for extended periods, store the speaker in a dry, cool place, ideally in its original packaging or a protective cover, away from direct sunlight and extreme temperatures.
• કેબલ નિરીક્ષણ: Periodically check all power and audio cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.

Caution: Do not attempt to open the speaker cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

6. મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your PROEL V10PLUS speaker.

If the problem persists after trying these solutions, please contact PROEL customer support or an authorized service center.

7. સ્પષ્ટીકરણો

Detailed technical specifications for the PROEL V10PLUS speaker:

8. વોરંટી અને સપોર્ટ

8.1 વોરંટી માહિતી

This PROEL V10PLUS speaker comes with an extended warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PROEL webસાઇટ પર જાઓ અથવા તમારા અધિકૃત ડીલરનો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીનો પુરાવો રાખો.

8.2 ગ્રાહક સપોર્ટ

For technical assistance, service, or spare parts, please contact PROEL customer support. You can find contact information and additional resources, including FAQs and product documentation, on the official PROEL webસાઇટ (www.proel.com). Please have your product model number (V10PLUS) and serial number ready when contacting support.