Bousnic Replacement Remote for P-Collar 320 and P-Collar 320B Dog Training Collars

1. પરિચય

This document serves as the instruction manual for the Bousnic Replacement Remote, designed for use with Bousnic P-Collar 320 and P-Collar 320B dog training receiver collars. This product includes only the remote control. Receiver collars, charging cables, and other accessories are not included and must be acquired separately if needed.

The remote features an intuitive LCD display and provides various training modes to assist in effective dog training.

Image: Bousnic Replacement Remote Control with LCD display.

2. સલામતી માહિતી

• મહત્વપૂર્ણ સૂચના: રિમોટ કંટ્રોલ છે વોટરપ્રૂફ નથી. To prevent damage, keep it away from water and moisture.
• Ensure the remote is handled with care to avoid drops or impacts that could damage internal components.
• Store the remote in a safe place, out of reach of pets, to prevent chewing or damage.

3. સેટઅપ

The Bousnic Replacement Remote comes with a built-in Lithium Polymer battery. Before first use, it is recommended to fully charge the remote. A charging cable is not included with this replacement remote.

રિમોટ ચાર્જ કરી રહ્યા છીએ

1. Connect a compatible charging cable (not included) to the remote's charging port.
2. ચાર્જિંગ કેબલના બીજા છેડાને USB પાવર એડેપ્ટર (શામેલ નથી) અથવા કમ્પ્યુટરના USB પોર્ટમાં પ્લગ કરો.
3. The battery indicator on the LCD display will show charging status. Once fully charged, disconnect the remote from the charger.

4. જોડી બનાવવાની સૂચનાઓ

To ensure proper functionality, the replacement remote must be paired with your existing Bousnic receiver collar. Follow these steps:

1. Turn on the remote and select the desired channel (e.g., channel 1 or 2).
2. Turn off the receiver collar by pressing and holding its power button until the red indicator light turns off.
3. Press and hold the receiver collar's power button for a few seconds until the green light on the receiver starts flashing. This indicates the receiver has entered pairing mode.
4. While the receiver's green light is flashing, press either the beep button or the vibration button on the remote.
5. Press the beep button or the vibration button again to confirm successful pairing. If paired correctly, you will hear a beep tone or feel a vibration from the receiver collar.

Image: Illustration of receiver collar modes (Beep, Vibration, Static Shock).

5. ઓપરેટિંગ સૂચનાઓ

The Bousnic remote offers multiple training modes to suit your dog's needs. The LCD display shows the selected mode, intensity level, and battery status.

ઉપલબ્ધ મોડ્સ:

• વાઇબ્રેશન મોડ: Delivers a gentle vibration to the receiver collar. The intensity can typically be adjusted.
• બીપ મોડ: Emits an audible tone from the receiver collar. This is often used as a warning or for positive reinforcement.
• સ્ટેટિક શોક મોડ: Provides a static stimulation. The intensity levels are adjustable to ensure humane training. Use this mode responsibly and at the lowest effective level.

Switching Modes and Adjusting Intensity:

Refer to the buttons on your remote for mode selection and intensity adjustment. Typically, there are dedicated buttons for each mode and up/down buttons to change intensity levels, which are displayed on the LCD screen.

Image: Bousnic remote control demonstrating a 1000 ft control range.

6. જાળવણી

• સફાઈ: રિમોટને નરમ, સૂકા કપડાથી સાફ કરો. કઠોર રસાયણો અથવા ઘર્ષક ક્લીનર્સનો ઉપયોગ કરશો નહીં.
• સંગ્રહ: Store the remote in a cool, dry place when not in use. Avoid extreme temperatures.
• બેટરી સંભાળ: To prolong battery life, avoid fully discharging the remote frequently. Charge it regularly, especially if it will be stored for an extended period.

7. મુશ્કેલીનિવારણ

રિમોટ પ્રતિસાદ આપતું નથી:

• બેટરી તપાસો: Ensure the remote's battery is sufficiently charged. Recharge if necessary.
• Wake Up Remote: Some remotes may enter a sleep mode to conserve battery. Press any button to wake it up before attempting to use a training function.

જોડી બનાવવાની સમસ્યાઓ:

• Repeat Pairing Steps: Carefully follow the pairing instructions in Section 4 again. Ensure the receiver collar is in pairing mode (green light flashing) when you press a function button on the remote.
• Check Receiver Battery: Ensure the receiver collar has sufficient battery power.
• નિકટતા: Ensure the remote and receiver collar are close to each other during the pairing process.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For information regarding product warranty, returns, or technical support, please refer to the original product packaging or contact Bousnic customer service directly. Contact details can typically be found on the manufacturer's official webસાઇટ અથવા તમારા ખરીદી પ્લેટફોર્મ દ્વારા.