પરિચય
This manual provides detailed instructions for the setup, operation, and maintenance of your KWANWA Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

છબી: આગળ view of the KWANWA Alarm Clock displaying 12:45 in red LED digits. The clock has a black case and a large, clear screen.
પેકેજ સામગ્રી
ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:
- KWANWA Alarm Clock Unit
- વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
નોંધ: બેટરીઓ શામેલ નથી અને અલગથી ખરીદવી આવશ્યક છે.
સેટઅપ
1. બેટરી ઇન્સ્ટોલેશન
- ઘડિયાળના પાછળના ભાગમાં બેટરીનો ડબ્બો શોધો.
- બેટરી કમ્પાર્ટમેન્ટ કવર ખોલો.
- Insert two (2) D-size alkaline batteries, ensuring correct polarity (+/-).
- બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.

છબી: પાછળનો ભાગ view of the KWANWA Alarm Clock, highlighting the battery compartment and various control buttons for hour, minute, alarm, and time settings.
2. પ્રારંભિક સમય સેટિંગ
- Press the "TIME SET" button on the back of the clock. The hour digits will begin to flash.
- Use the "HOUR" button to adjust the hour.
- Press "TIME SET" again. The minute digits will flash.
- Use the "MIN" button to adjust the minutes.
- Press "TIME SET" a third time to confirm and exit time setting mode.
3. પ્લેસમેન્ટ વિકલ્પો
The clock can be placed on a flat surface or mounted on a wall.
- Table-top/Desk Placement: Extend the two unfoldable stand legs located on the back of the clock to position it upright on any flat surface.
- વોલ માઉન્ટિંગ: Utilize the three wall-mounting hang holes on the back of the clock. Ensure appropriate wall anchors and screws are used for secure installation (not included).

છબી: બાજુ view of the KWANWA Alarm Clock illustrating its dimensions (8.7 inches wide, 5.6 inches high, 1.8 inches deep) and highlighting features like large display, wall mount/table top, battery powered, adjustable LED brightness, daily alarm, and auto night mode.
ઓપરેટિંગ સૂચનાઓ
1. સમય પ્રદર્શન
The clock displays time in a 12-hour format. The large LED digits are constantly lit for easy readability.
2. એલાર્મ સેટિંગ
- Press the "AL SET" button on the back of the clock. The alarm hour digits will flash.
- Use the "HOUR" button to set the desired alarm hour.
- Press "AL SET" again. The alarm minute digits will flash.
- Use the "MIN" button to set the desired alarm minutes.
- Press "AL SET" a third time to confirm and exit alarm setting mode.
To activate or deactivate the alarm, press the "AL ON/OFF" button. An indicator will show if the alarm is active.
3. એલાર્મ બંધ કરવું
When the alarm sounds, it will gradually increase in volume for up to 2 minutes. To stop the alarm, touch the "AL STOP" button located on the front right side of the clock.

Image: Two panels demonstrating alarm functionality. The top panel shows a hand pressing the "AL STOP" button on the clock face to silence the alarm. The bottom panel illustrates the alarm's volume gradually increasing over time, with the clock showing 6:00 and then 6:02.
4. તેજ ગોઠવણ
The clock offers three levels of brightness (High, Medium, Low) and an automatic night mode.
- મેન્યુઅલ એડજસ્ટમેન્ટ: Press and hold the "MIN" button for 2 seconds to cycle through the brightness levels (High, Medium, Low).
- સ્વતઃ નાઇટ મોડ: The LED display will automatically dim during 8 PM to 6 AM to conserve energy and reduce light disturbance during sleep.

Image: Three KWANWA Alarm Clocks side-by-side, demonstrating different brightness settings: High (brightest), Medium, and Low (dimmest), with corresponding sun icons indicating light intensity.
5. Flashing Dots Control
The flashing of the dots between the hour and minute digits can be turned off.
- To start/stop the flashing, press and hold the "MIN" button for 2 seconds.
જાળવણી
1. બેટરી રિપ્લેસમેન્ટ
When the display dims significantly or the clock stops functioning, it is time to replace the batteries. Follow the battery installation steps in the "Setup" section. Ensure to use fresh D-size alkaline batteries for optimal performance and longevity (up to 12 months).
2. સફાઈ
To clean the clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the display or casing.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Clock does not turn on or display is blank. | બેટરીઓ મૃત અથવા ખોટી રીતે ઇન્સ્ટોલ કરેલી છે. | Replace with fresh D-size alkaline batteries, ensuring correct polarity. |
| સમય અચોક્કસ છે. | Initial setting error or prolonged use (minor drift). | Re-set the time using the "TIME SET" button. The clock has an accuracy of ±30 seconds per month. |
| એલાર્મ વાગતો નથી. | એલાર્મ સક્રિય થયેલ નથી અથવા ખોટી રીતે સેટ થયેલ નથી. | Ensure the alarm is turned ON using the "AL ON/OFF" button and that the alarm time is correctly set. |
| ડિસ્પ્લે ખૂબ ઝાંખું અથવા ખૂબ તેજસ્વી છે. | બ્રાઇટનેસ સેટિંગને સમાયોજિત કરવાની જરૂર છે. | Manually adjust brightness by pressing and holding the "MIN" button for 2 seconds. Check if auto night mode is active. |
વિશિષ્ટતાઓ
- મોડલ: KW715S
- ડિસ્પ્લે પ્રકાર: ડિજિટલ એલઇડી
- રંગ: Black Case-red Led Digit
- ઉત્પાદન પરિમાણો: ૪૦.૫૫"પગ x ૨.૨૪"પગ x ૪.૧૩"ઘ
- વસ્તુનું વજન: 11.7 ઔંસ
- પાવર સ્ત્રોત: Battery Powered (2 x D-size Alkaline Batteries, not included)
- વિશેષ લક્ષણ: Cordless, Auto Dimmer Mode, Wall-mountable, Table-top
- સામગ્રી: પ્લાસ્ટિક
- સમયની ચોકસાઈ: દર મહિને ±30 સેકન્ડ
- અલાર્મ અવધિ: Up to 120 seconds (gradually increasing volume)
વોરંટી અને આધાર
વોરંટી માહિતી
This KWANWA Alarm Clock comes with a મર્યાદિત વોરંટી. Please refer to the product packaging or contact KWANWA customer service for specific details regarding warranty coverage and duration.
ગ્રાહક આધાર
For any questions, technical assistance, or warranty claims, please contact KWANWA customer support through the retailer's platform or visit the official KWANWA store page on Amazon: KWANWA Store.
વધારાની માહિતી
આ માર્ગદર્શિકામાં એમ્બેડ કરવા માટે આપેલા ડેટામાં વેચનારના કોઈ સત્તાવાર ઉત્પાદન વિડિઓઝ મળ્યા નથી.




