PNI Finger 300 Biometric Access Control System User Manual

1. પરિચય

The PNI Finger 300 is a robust biometric access control system designed for secure entry management. It integrates fingerprint recognition, password entry, and electromagnetic card reading capabilities to provide flexible and reliable access solutions. This manual provides essential information for the proper installation, operation, and maintenance of your device.

2. ઉત્પાદન સુવિધાઓ

• ફિંગરપ્રિન્ટ રીડર: Supports up to 3000 fingerprint templates for secure biometric identification.
• RFID Card Access: Compatible with RFID cards, supporting memory for up to 30000 cards.
• પાસવર્ડ એન્ટ્રી: Allows access using a numerical password.
• Access Control System Connection: Designed for integration with electromagnetic locks and access buttons.
• કોમ્યુનિકેશન ઈન્ટરફેસ: Features TCP/IP and RS485 for system integration.
• ટકાઉ ડિઝાઇન: IP65 protection class for enhanced durability.

3. પેકેજ સામગ્રી

ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:

• PNI Finger 300 Identification Unit
• માઉન્ટિંગ એસેસરીઝ (સ્ક્રૂ, વોલ પ્લગ)
• વાયરિંગ હાર્નેસ
• Proximity Card (for testing/initial setup)

Image 3.1: PNI Finger 300 components including the main unit, mounting plate, wiring harness, and an RFID card.

4. ઉત્પાદન ઓવરview

4.1 ફ્રન્ટ પેનલ

છબી 4.1: આગળ view of the PNI Finger 300 showing the keypad, fingerprint scanner, and status indicators.

The front panel features a numerical keypad for password entry, a fingerprint scanner for biometric identification, and LED indicators for status feedback (e.g., access granted/denied, power status).

4.2 Rear Panel and Wiring

છબી 4.2: પાછળ view of the PNI Finger 300 with wiring connections and product labels.

The rear panel contains the wiring terminals for power, lock control, alarm, and communication interfaces. Refer to the detailed wiring diagram in Section 5.2 for connection instructions.

5. સેટઅપ અને ઇન્સ્ટોલેશન

5.1 ઉપકરણને માઉન્ટ કરવાનું

1. Choose a suitable location for installation, ensuring it is secure and protected from extreme weather conditions if outdoors.
2. Use the provided mounting plate as a template to mark drilling points on the wall.
3. છિદ્રો ડ્રિલ કરો અને દિવાલ પ્લગ દાખલ કરો.
4. સ્ક્રૂનો ઉપયોગ કરીને માઉન્ટિંગ પ્લેટને દિવાલ સાથે જોડો.
5. Attach the PNI Finger 300 unit to the mounting plate.

૫.૨ વાયરિંગ ડાયાગ્રામ અને જોડાણો

Carefully connect the wires according to the diagram on the rear panel and the following descriptions:

Ensure all connections are secure and correctly matched to avoid damage to the device or connected systems. Power should only be applied after all wiring is complete.

6. ઓપરેટિંગ સૂચનાઓ

6.1 Initial Power-Up and Admin Setup

Upon first power-up, the system will typically be in an uninitialized state. Follow the manufacturer's specific instructions (usually involving a default admin password or a master card) to enter programming mode and set up the initial administrator.

6.2 વપરાશકર્તા નોંધણી

To register new users, the system must be in programming mode (accessed by the administrator).

• ફિંગરપ્રિન્ટ નોંધણી: Place the user's finger on the scanner multiple times as prompted until the fingerprint is successfully enrolled.
• કાર્ડ નોંધણી: Present the RFID card to the reader when prompted.
• પાસવર્ડ નોંધણી: Enter the desired numerical password using the keypad and confirm.

6.3 સિસ્ટમને ઍક્સેસ કરવી

Once users are registered, they can gain access using their assigned method:

• ફિંગરપ્રિન્ટ Place a registered finger on the scanner.
• કાર્ડ: Present a registered RFID card to the reader.
• પાસવર્ડ: Enter the registered password using the keypad, followed by the '#' key (or as specified by system configuration).

A successful access attempt will typically be indicated by a green LED and an audible signal, followed by the unlocking of the connected door.

7. જાળવણી

• સફાઈ: Regularly clean the fingerprint scanner and keypad with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• પર્યાવરણીય સંરક્ષણ: Ensure the device is protected from direct water exposure and extreme temperatures, even with its IP65 rating, to prolong its lifespan.
• ફર્મવેર અપડેટ્સ: Check the PNI website periodically for any available firmware updates to ensure optimal performance and security.

8. મુશ્કેલીનિવારણ

• ઉપકરણ ચાલુ નથી: Verify the 12V DC power supply connection and ensure the power source is active. Check wiring for shorts or disconnections.
• Access Denied (Registered User): Ensure the fingerprint is placed correctly on the scanner, the card is presented properly, or the password is entered accurately. Re-enroll the user if issues persist.
• દરવાજો ખુલતો નથી: Check the wiring to the electromagnetic lock. Ensure the lock itself is functioning correctly and receiving power. Verify the system's lock release settings.
• કીપેડ પ્રતિભાવવિહીન: Check for physical damage or debris. If the issue persists, a system reset or professional inspection may be required.

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

For warranty information, technical support, or service inquiries, please refer to the official PNI website or contact your authorized dealer. You can also visit the PNI Store on Amazon વધારાની ઉત્પાદન માહિતી અને સહાયક સંસાધનો માટે.