બેહરિંગર NX1000 અલ્ટ્રા-લાઇટવેઇટ 1000W ક્લાસ-ડી પાવર Ampલિફાયર સૂચના માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.

આગળ view of the Behringer NX1000 ampલાઇફાયર, શોકasing its compact design and front panel controls.

2. બોક્સમાં શું છે

અનપેક કરતી વખતે ખાતરી કરો કે બધા ઘટકો હાજર છે:

• Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampજીવંત
• પાવર કેબલ
• સૂચના માર્ગદર્શિકા (આ દસ્તાવેજ)

3. મુખ્ય લક્ષણો

• Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption.
• Built-in stereo crossover with low-cut, high-cut and full range Mode.
• SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.

An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.

A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.

4. સેટઅપ

Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampજીવંત:

4.1. રેક માઉન્ટિંગ

The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.

બાજુ પ્રોfile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.

4.2. Audioડિઓ કનેક્શન્સ

Connect your audio source (mixer, preamplifier, etc.) to the amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.

Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.

વિગતવાર view of the rear panel, showing input and output connectors for audio signals and speakers.

4.3. પાવર કનેક્શન

Connect the supplied power cable to the AC inlet on the rear panel of the amplifier and then to a suitable power outlet.

4.4. Setup Video Guide

5. સંચાલન Ampજીવંત

5.1. પાવર ચાલુ/બંધ

દબાવો પાવર switch on the front panel to turn the amplifier on or off. The પાવર LED will illuminate when the unit is active.

Close-up of the power button, indicating its location on the front panel.

5.2. વોલ્યુમ નિયંત્રણો

એડજસ્ટ કરો ચેનલ એ અને ચેનલ બી gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.

5.3. મોડ પસંદગી

On the rear panel, use the મોડ switch to select between સ્ટીરિયો, બ્રિજ્ડ, અથવા સમાંતર operation, depending on your speaker configuration requirements.

• સ્ટીરિયો: Each channel operates independently, providing separate left and right audio signals.
• BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
• સમાંતર: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.

5.4. Crossover Settings

Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.

5.5. એલઇડી સૂચકાંકો

The front panel features several LED indicators:

• PRO (Protect): Illuminates if the amplifier enters protection mode due to overload, overheating, or short-circuit.
• મર્યાદા: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
• સિગ્નલ: Lights up when an audio signal is present on the respective channel.
• પાવર: સૂચવે છે કે ધ ampલિફાયર ચાલુ છે.

5.6. ઉત્પાદન ઓવરview વિડિયો

6. જાળવણી

તમારા લાંબા આયુષ્ય અને શ્રેષ્ઠ કામગીરીની ખાતરી કરવા માટે amplifier, follow these maintenance tips:

• નરમ, સૂકા કપડાથી તેને સાફ કરીને યુનિટને સાફ રાખો. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરવાનું ટાળો.
• આસપાસ પર્યાપ્ત વેન્ટિલેશનની ખાતરી કરો amplifier to prevent overheating. Do not block the ventilation grilles.
• Regularly check all cable connections for secure fit and signs of wear.

7. મુશ્કેલીનિવારણ

If you encounter issues with your Behringer NX1000 amplifier, refer to the following common problems and solutions:

• કોઈ સાઉન્ડ આઉટપુટ નથી:
  • Check all audio input and output connections.
  • ખાતરી કરો amplifier is powered on and the POWER LED is illuminated.
  • Verify that input sources are active and sending a signal.
  • Adjust channel gain knobs and master volume on your mixer/preamp.
• વિકૃત અવાજ:
  • Check if the LIMIT LED is illuminated; reduce input level if it is.
  • Ensure speaker impedance matches the ampલિફાયરની ક્ષમતાઓ.
  • Inspect speaker cables for damage or incorrect wiring.
• Amplifier Enters Protect Mode (PRO LED illuminated):
  • બંધ કરો amplifier and disconnect all speakers.
  • Check for short circuits in speaker cables or faulty speakers.
  • Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
  • Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
• પંખાનો વધુ પડતો અવાજ:
  • ખાતરી કરો amplifier has sufficient airflow and is not in an enclosed space.
  • Clean any dust buildup from the fan and ventilation grilles.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

The Behringer NX1000 ampલિફાયર એ સાથે આવે છે મર્યાદિત વોરંટી. For detailed warranty information, product support, or service inquiries, please visit the official Behringer webસાઇટ પર જાઓ અથવા તેમના ગ્રાહક સપોર્ટનો સીધો સંપર્ક કરો.

Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.