Energizer CR1632

એનર્જાઇઝર CR1632 લિથિયમ બેટરી 3V વપરાશકર્તા માર્ગદર્શિકા

મોડેલ: CR1632

1. પરિચય

This manual provides essential information for the safe and effective use of the Energizer CR1632 3V Lithium Coin Cell Battery. Please read these instructions carefully before use and retain them for future reference. This battery is designed for use in various small electronic devices requiring a CR1632 cell, such as car key fobs, watches, calculators, and medical devices.

Energizer CR1632 Lithium Battery 3V in blister packaging

Image: Two Energizer CR1632 3V Lithium Coin Cell Batteries in their original blister packaging, showing the battery specifications and brand logo.

2. સલામતી માહિતી

WARNING: Keep batteries out of reach of children. Swallowing can lead to serious injury or death in as little as 2 hours due to chemical burns and potential perforation of the esophagus. If swallowed, immediately seek medical attention.

  • Do not recharge, disassemble, heat, or dispose of in fire. This may cause explosion, leakage, or fire.
  • નવી અને વપરાયેલી બેટરીઓ અથવા વિવિધ પ્રકારની બેટરીઓનું મિશ્રણ કરશો નહીં.
  • Ensure correct polarity (+ and -) when installing.
  • Store batteries in their original packaging until ready for use.
  • બેટરી ટર્મિનલ્સને શોર્ટ-સર્કિટ કરવાનું ટાળો.

3. સેટઅપ અને ઇન્સ્ટોલેશન

The installation process for CR1632 batteries typically involves opening the device's battery compartment, removing the old battery, and inserting the new one with correct polarity. Specific steps may vary depending on the device.

  1. બેટરી કમ્પાર્ટમેન્ટ ઓળખો: Locate the battery compartment on your electronic device. This is often secured with a small screw or a latch.
  2. ખુલ્લો ડબ્બો: Use an appropriate tool (e.g., a small screwdriver, a coin, or the device's emergency key) to open the battery compartment. Refer to your device's manual for precise instructions.
  3. જૂની બેટરી કાઢી નાખો: Carefully remove the depleted CR1632 battery. Note its orientation (positive (+) side up or down).
  4. નવી બેટરી દાખલ કરો: Place the new Energizer CR1632 battery into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the device's markings.
  5. બંધ કમ્પાર્ટમેન્ટ: Securely close the battery compartment. Test the device to ensure proper function.

4. ઓપરેટિંગ સૂચનાઓ

The Energizer CR1632 battery provides a stable 3-volt power supply for compatible devices. Once installed correctly, the device should operate as intended. No specific operating procedures are required for the battery itself beyond proper installation.

5. જાળવણી અને સંગ્રહ

  • સંગ્રહ: Store unused batteries in a cool, dry place at room temperature, away from direct sunlight and extreme temperatures. Keep them in their original packaging to prevent short-circuiting.
  • હેન્ડલિંગ: Avoid touching the battery terminals with bare hands, as oils and dirt can affect conductivity.
  • સફાઈ: If battery contacts in a device appear dirty, clean them with a cotton swab lightly moistened with rubbing alcohol before inserting a new battery.

6. મુશ્કેલીનિવારણ

If your device does not function after replacing the battery:

  • ધ્રુવીયતા તપાસો: ખાતરી કરો કે બેટરી યોગ્ય ધન (+) અને ઋણ (-) દિશા સાથે દાખલ કરવામાં આવી છે.
  • Verify Battery Type: Confirm that CR1632 is the correct battery type specified for your device.
  • Inspect Contacts: Check for any corrosion or debris on the device's battery contacts and clean if necessary.
  • ટેસ્ટ બેટરી: If possible, test the new battery with a battery tester to ensure it is charged.
  • ડિવાઇસ મેન્યુઅલનો સંપર્ક કરો: Refer to your device's instruction manual for specific troubleshooting steps.

7. સ્પષ્ટીકરણો

લક્ષણસ્પષ્ટીકરણ
મોડલ નંબરCR1632
ભાગtage3V
બેટરી સેલ કમ્પોઝિશનલિથિયમ
વસ્તુનું વજન0.01 ઔંસ
પેકેજ પરિમાણો5.67 x 4.96 x 0.31 ઇંચ
Number of Batteries (in this pack)2
ભલામણ કરેલ ઉપયોગોWatches, Key Fobs, Calculators, Small Electronics

8. નિકાલ

Do not dispose of batteries in household waste. Lithium batteries should be recycled or disposed of according to local regulations. Many retailers and community centers offer battery recycling programs. Contact your local waste management authority for information on proper disposal in your area.

9. વોરંટી અને સપોર્ટ

Energizer batteries are manufactured to high-quality standards. For information regarding product warranty or customer support, please refer to the official Energizer webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

સંબંધિત દસ્તાવેજો - CR1632

પ્રિview Energizer UE30035C 30000mAh Portable Power Bank User Manual and Specifications
Comprehensive guide for the Energizer UE30035C 30000mAh portable power bank, covering specifications, safety instructions, usage, charging, warranty, and customer support.
પ્રિview એનર્જીઝર સ્માર્ટ વાઇફાઇ ઇન્ડોર કેમેરા EIP1-1003 ક્વિક સ્ટાર્ટ ગાઇડ
એનર્જાઇઝર સ્માર્ટ વાઇફાઇ ઇન્ડોર કેમેરા (EIP1-1003) સાથે ઝડપથી શરૂઆત કરો. આ માર્ગદર્શિકા તમારા ઘરની સુરક્ષા જરૂરિયાતો માટે આવશ્યક સેટઅપ, ઇન્સ્ટોલેશન અને ઓપરેશનલ માહિતી પ્રદાન કરે છે.
પ્રિview એનર્જાઇઝર સ્માર્ટ વાઇફાઇ વિડિઓ ડોરબેલ ક્વિક સ્ટાર્ટ ગાઇડ | EOD1-1002-2002
એનર્જાઇઝર સ્માર્ટ વાઇફાઇ વિડિઓ ડોરબેલ (મોડેલ EOD1-1002-2002) માટે ઝડપી શરૂઆત માર્ગદર્શિકા. સ્ટેપ-બાય-સ્ટેપ સૂચનાઓ અને મુશ્કેલીનિવારણ ટિપ્સ સાથે તમારા વિડિઓ ડોરબેલને કેવી રીતે સેટ કરવું, કનેક્ટ કરવું અને તેનો ઉપયોગ કેવી રીતે કરવો તે શીખો.
પ્રિview એનર્જાઇઝર UE10050CC 10000mAh પાવર બેંક - વપરાશકર્તા માર્ગદર્શિકા અને સ્પષ્ટીકરણો
Energizer UE10050CC 10000mAh પોર્ટેબલ પાવર બેંક માટે વિગતવાર સ્પષ્ટીકરણો, ઉપયોગ સૂચનાઓ અને ચાર્જિંગ માર્ગદર્શન મેળવો. PowerSafe મેનેજમેન્ટ અને વોરંટી માહિતી વિશે જાણો.
પ્રિview એનર્જાઇઝર સ્માર્ટ વાઇફાઇ વિડિઓ ડોરબેલ ક્વિક સ્ટાર્ટ ગાઇડ | EOD1-1002-2002
તમારા એનર્જાઇઝર સ્માર્ટ વાઇફાઇ વિડિઓ ડોરબેલ (EOD1-1002-2002) સાથે શરૂઆત કરો. આ ઝડપી શરૂઆત માર્ગદર્શિકા સેટઅપ, એપ્લિકેશન કનેક્શન, લાઇવને આવરી લે છે view, રેકોર્ડિંગ અને મુશ્કેલીનિવારણ.
પ્રિview એનર્જાઇઝર સ્માર્ટ વિડિઓ ડોરબેલ EOD1-1001-SIL ક્વિક સ્ટાર્ટ ગાઇડ
એનર્જાઇઝર સ્માર્ટ વિડિયો ડોરબેલ (મોડેલ EOD1-1001-SIL) માટે એક ઝડપી શરૂઆત માર્ગદર્શિકા, જેમાં પેકેજ સામગ્રી, એપ્લિકેશન જોડી, સેટઅપ, એલેક્સા અને ગૂગલ આસિસ્ટન્ટ સાથે વૉઇસ સક્રિયકરણ અને મુશ્કેલીનિવારણનો સમાવેશ થાય છે.