Einhell GE-LC 36/35 Li Solo Battery Chainsaw

1. પરિચય

This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.

Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.

2. સલામતી સૂચનાઓ

પાવર ટૂલ્સ ચલાવતી વખતે હંમેશા સલામતીને પ્રાથમિકતા આપો. આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ગંભીર ઈજા અથવા મિલકતને નુકસાન પહોંચાડી શકે છે.

2.1 સામાન્ય સલામતી

• વ્યક્તિગત રક્ષણાત્મક ઉપકરણો (PPE) પહેરો: Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
• કાર્ય ક્ષેત્ર: ખાતરી કરો કે કાર્યક્ષેત્ર નજીકના લોકો, બાળકો અને પાલતુ પ્રાણીઓથી દૂર હોય. વિસ્તાર સારી રીતે પ્રકાશિત અને અવરોધોથી મુક્ત રાખો.
• હવામાન પરિસ્થિતિઓ: Do not use the chainsaw in rain or damp conditions. Avoid operating in strong winds.
• બેટરી સલામતી: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.

2.2 Chainsaw Specific Safety

• રિફંડ નિવારણ: Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
• સાંકળ બ્રેક: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
• યોગ્ય પકડ: Always hold the chainsaw firmly with both hands, with your thumbs and fingers encircling the handles.
• Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.

Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.

3. ઉત્પાદન ઓવરview

The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.

3.1 મુખ્ય લક્ષણો

• Brushless Motor: For enhanced power and longer run time.
• Kickback Protection System: Automatically shuts off the saw upon chain lock.
• Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
• Tool-free Chain Tension Adjustment: For quick and easy adjustments.
• Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
• Metal Grip Claws: For secure handling and stability during cuts.
• Soft Grip Handle: For comfortable operation.

છબી 3.1: ક્લોઝ-અપ view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.

Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.

4. સેટઅપ

Before operating your chainsaw, ensure it is properly assembled and prepared.

4.1 અનપેકિંગ

Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.

4.2 બેટરી ઇન્સ્ટોલેશન

The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.

1. Locate the battery compartments on the chainsaw.
2. Slide each charged battery into its respective compartment until it clicks securely into place.
3. To remove, press the release button on the battery and pull it out.

Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.

Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.

4.3 Chain and Bar Assembly & Tensioning

The chainsaw features tool-free chain tension adjustment.

1. ખાતરી કરો કે ચેઇન બ્રેક છૂટી ગઈ છે.
2. Loosen the side cover knob by turning it counter-clockwise.
3. સ્પ્રૉકેટ અને ગાઇડ બારની આસપાસ સાંકળ મૂકો, ખાતરી કરો કે કટીંગ કિનારીઓ યોગ્ય દિશામાં હોય.
4. Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
5. Tighten the side cover knob slightly.
6. Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
7. Fully tighten the side cover knob.

Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.

4.4 Chain Oil Filling

The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.

1. ચેઇનસોને સ્તરની સપાટી પર મૂકો.
2. Unscrew the oil tank cap (refer to Image 4.4).
3. ટાંકીમાં ઉચ્ચ-ગુણવત્તાવાળા ચેઇન અને બાર તેલ ભરો. નકામા તેલ અથવા મોટર તેલનો ઉપયોગ કરશો નહીં.
4. કેપને સુરક્ષિત રીતે બદલો.

Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.

5. ઓપરેટિંગ સૂચનાઓ

Follow these steps for safe and effective operation of your chainsaw.

5.1 પ્રારંભ અને બંધ

1. Ensure batteries are installed and chain oil reservoir is full.
2. Disengage the chain brake by pulling the lever back towards the front handle.
3. Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
4. To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.

૪.૩ કાપવાની તકનીકો

• Planning the Cut: Before cutting, assess the wood for stability, potential kickback, and pinch points.
• Making the Cut: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
• નાના વૃક્ષો કાપવા: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
• લિમ્બિંગ: Work from the bottom up, supporting the branch to prevent pinching.

Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.

6. જાળવણી

નિયમિત જાળવણી શ્રેષ્ઠ કામગીરી સુનિશ્ચિત કરે છે અને તમારા ચેઇનસોનું આયુષ્ય લંબાવે છે.

૪.૪ ચેઇન ટેન્શન એડજસ્ટમેન્ટ

Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.

Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.

6.2 સાંકળ લ્યુબ્રિકેશન

The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.

Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.

6.3 સફાઇ અને સંગ્રહ

• After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
• Store the chainsaw in a dry, secure location, out of reach of children.
• Always use the guide bar cover when storing or transporting the chainsaw.

7. મુશ્કેલીનિવારણ

આ વિભાગ તમને આવી શકે તેવી સામાન્ય સમસ્યાઓનું નિરાકરણ લાવે છે.

If problems persist, contact Einhell customer support or a qualified service technician.

8. સ્પષ્ટીકરણો

Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.

9. વોરંટી અને સપોર્ટ

For warranty information, product registration, or technical support, please refer to the official Einhell webસાઇટ પર જાઓ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

વધુ સહાયતા માટે, મુલાકાત લો Einhell official webસાઇટ.