પરિચય
The Radial Catapult MINI TX is a compact and robust 4-channel analog audio snake transmitter designed to send balanced audio signals over a standard Cat 5 or Cat 6 Ethernet cable. This device, when paired with a Catapult MINI RX unit (sold separately), provides a convenient and cost-effective solution for transmitting multiple audio channels over long distances, utilizing existing network infrastructure or dedicated Cat cable runs. Its passive design ensures high-fidelity audio transmission without the need for power.
Figure 1: Radial Catapult MINI TX unit, angled view, highlighting its compact design and branding.
મુખ્ય લક્ષણો
- 4-Channel Audio Transmission: Supports four balanced analog audio signals.
- Cat 5/6 Connectivity: Utilizes standard Ethernet cables for signal transmission, offering flexibility and cost savings.
- Passive Operation: Requires no external power, simplifying setup and increasing વિશ્વસનીયતા.
- કોમ્પેક્ટ અને ટકાઉ ડિઝાઇન: Housed in a rugged steel enclosure, suitable for professional use.
- XLR and RJ45 Connectors: Standardized connectors for easy integration into existing audio systems.
સેટઅપ સૂચનાઓ
Setting up the Catapult MINI TX is straightforward. Ensure you have a Catapult MINI RX unit and a shielded Cat 5 or Cat 6 Ethernet cable of appropriate length for your application.
- ઘટકો ઓળખો: Locate the Catapult MINI TX (transmitter) and Catapult MINI RX (receiver) units. The TX unit typically has female XLR inputs, and the RX unit has male XLR outputs.
- Connect Audio Sources to TX: Connect your balanced audio sources (e.g., microphones, preamps, mixing console outputs) to the four female XLR inputs on the Catapult MINI TX unit. Each input corresponds to a specific channel.
- ઇથરનેટ કેબલ કનેક્ટ કરો: Connect one end of a shielded Cat 5 or Cat 6 Ethernet cable to the RJ45 connector on the Catapult MINI TX unit.
- Connect RX Unit: Connect the other end of the Ethernet cable to the RJ45 connector on the Catapult MINI RX unit.
- Connect Audio Destinations from RX: Connect the male XLR outputs of the Catapult MINI RX unit to your audio destinations (e.g., mixing console inputs, audio interface inputs, powered speakers).
- જોડાણો ચકાસો: Double-check all cable connections to ensure they are secure and correctly routed.
Figure 2: Catapult MINI TX with four XLR cables connected, illustrating the input setup.
આકૃતિ 3: અંત view of the Catapult MINI TX, highlighting the RJ45 and XLR connector ports.
ઓપરેટિંગ સૂચનાઓ
Once the Catapult MINI TX and RX units are connected, operation is automatic due to their passive design. No power or configuration is required.
- સિગ્નલ ફ્લો: Audio signals from your sources connected to the TX unit's XLR inputs will be transmitted over the Cat 5/6 cable to the RX unit, and then output via its XLR connectors.
- ચેનલ મેપિંગ: Each XLR input on the TX unit corresponds directly to an XLR output on the RX unit. Ensure your audio sources and destinations are connected to the correct channels.
- કેબલ લંબાઈ: While Cat 5/6 cables can transmit signals over significant distances, extremely long runs (e.g., hundreds of feet) may introduce slight signal degradation. Test your setup with the intended cable length to ensure optimal performance.
- Shielded Cable Requirement: Always use shielded Cat 5 or Cat 6 cable for reliable and noise-free operation. Unshielded cables may introduce interference.
જાળવણી
The Radial Catapult MINI TX is designed for durability and requires minimal maintenance.
- સફાઈ: યુનિટના બાહ્ય ભાગને સાફ કરવા માટે નરમ, સૂકા કપડાનો ઉપયોગ કરો. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સ ટાળો.
- સંગ્રહ: Store the unit in a dry environment, away from extreme temperatures and direct sunlight, when not in use.
- કેબલ નિરીક્ષણ: Periodically inspect your Cat 5/6 and XLR cables for any signs of wear, damage, or corrosion. Replace damaged cables immediately.
- કનેક્ટરની સંભાળ: Keep the XLR and RJ45 connectors free of dust and debris.
મુશ્કેલીનિવારણ
If you encounter issues with your Catapult MINI TX, consider the following troubleshooting steps:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| કોઈ ઓડિયો સિગ્નલ નથી |
|
|
| Hum or noise in audio |
|
|
| તૂટક તૂટક સંકેત |
|
|
વિશિષ્ટતાઓ
| લક્ષણ | વિગત |
|---|---|
| મોડલ | R800 8028 |
| ચેનલો | 4 (balanced analog audio) |
| Connector Type (Audio) | XLR Female (Input) |
| Connector Type (Data) | આરજે 45 |
| કેબલ આવશ્યકતા | Shielded Cat 5 or Cat 6 Ethernet cable |
| ઓપરેશન | Passive (no power required) |
| પરિમાણો (L x W x H) | 6.3 x 4.3 x 3 ઇંચ (અંદાજે) |
| વજન | ૩.૦૫ પાઉન્ડ (અંદાજે) |
| બાંધકામ સામગ્રી | સ્ટીલ |
| રંગ | વાદળી |
વોરંટી અને આધાર
Radial Engineering products are built to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official Radial Engineering website or contact their customer support directly. For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the Radial Engineering support page or contact their authorized service centers.
સત્તાવાર Webસાઇટ: www.radialeng.com
