wellye 5864137387

wellye RX23 12V બ્લૂટૂથ રિમોટ કંટ્રોલ અને રીસીવર કીટ યુઝર મેન્યુઅલ

મોડલ: 5864137387

1. Introduction and Compatibility

This manual provides detailed instructions for the installation, operation, and maintenance of the wellye RX23 12V Bluetooth Remote Control and Receiver Kit, designed for children's electric ride-on cars. Please read this manual thoroughly before use to ensure proper functionality and safety.

૧.૧ સુસંગતતા તપાસ

To ensure this control box fits your specific ride-on car, open the existing control box in your electric ride-on car and compare its appearance and model number. This kit is compatible if the appearance and the model number (RX23 12V) match your original unit.

wellye RX23 12V Bluetooth Remote Control and Receiver Kit

છબી 1.1: ઓવરview of the wellye RX23 12V Bluetooth Remote Control and Receiver Kit, showing both the remote control and the receiver unit.

Close-up of the wellye RX23 12V receiver unit

છબી 1.2: ક્લોઝ-અપ view of the wellye RX23 12V receiver unit, highlighting its connectors and casing.

wellye RX23 12V receiver unit with model label

Image 1.3: The wellye RX23 12V receiver unit, showing the "RX23 12V" label on its side, crucial for compatibility verification.

2. સલામતી માહિતી

For external use only. Keep away from naked flame or direct heat sources. This product is intended for use with children's ride-on toys. Adult supervision is recommended during installation and operation.

3. સેટઅપ અને ઇન્સ્ટોલેશન

૧.૫ રિમોટ કંટ્રોલ બેટરી ઇન્સ્ટોલેશન

The remote control requires two AAA 1.5V batteries. Use a Phillips screwdriver to unscrew the screw on the back of the remote control. Open the battery cover, install the batteries, ensuring correct positive (+) and negative (-) polarity, then close the battery cover and secure the screw.

Back of the remote control with battery compartment instructions

છબી 3.1: પાછળ view of the remote control, showing the battery compartment and basic operation instructions.

3.2 Frequency Matching (Pairing)

Frequency matching is required for the first use or after replacing the remote control batteries. If the matching is unsuccessful, turn off the car's power and repeat steps 2 and 3.

  1. Install two AAA 1.5V batteries into the remote control, observing correct polarity. The indicator light will flash three times, confirming correct battery installation.
  2. Press and hold the frequency key (often labeled "car select" or "S") on the remote control for approximately 2 seconds. The indicator light on the remote will begin to flash.
  3. Turn on the power supply of the ride-on car. The indicator light on the remote control will turn off, indicating successful frequency matching.
  4. If the indicator light does not turn off, the matching was unsuccessful. Turn off the car's power and repeat steps 2 and 3.

4. ઓપરેટિંગ સૂચનાઓ

Once the remote control and receiver are successfully paired, you can operate the ride-on car using the remote control. The remote control will enter power-saving mode if not operated for 10 seconds, and the indicator light will turn off.

૧ રિમોટ કંટ્રોલ બટન વર્ણન

Close-up of the wellye remote control buttons

છબી 4.1: ક્લોઝ-અપ view of the wellye remote control, showing the various control buttons.

5. જાળવણી

Regular maintenance ensures the longevity and proper functioning of your remote control and receiver kit.

6. મુશ્કેલીનિવારણ

સમસ્યાસંભવિત કારણઉકેલ
Remote control not responding / Car not moving
  • બેટરીઓ મૃત અથવા ખોટી રીતે ઇન્સ્ટોલ કરેલી છે.
  • Remote control is not paired with the car.
  • Car's power is off.
  • યોગ્ય ધ્રુવીયતા સુનિશ્ચિત કરીને, બેટરી બદલો.
  • Perform frequency matching (refer to Section 3.2).
  • Ensure the ride-on car's power switch is ON.
Remote control indicator light flashes continuously after battery installationFrequency matching is required.Perform frequency matching (refer to Section 3.2).
Remote control indicator light does not turn off after attempting frequency matchingFrequency matching failed.Turn off the car's power, then repeat steps 2 and 3 of the frequency matching process (Section 3.2).
Car moves erratically or in wrong directionWiring issue or faulty receiver.Verify all wiring connections to the receiver are secure and correctly installed. If issues persist, the receiver may be faulty and require replacement.

7. સ્પષ્ટીકરણો

લક્ષણવિગત
મોડલ નંબરWEELYE RX23 12V 7-pin single-side
ભાગtage12 વી
કનેક્ટિવિટી2.4G બ્લૂટૂથ
રિમોટ કંટ્રોલ બેટરી2 x AAA 1.5V (શામેલ નથી)
ઉત્પાદન પરિમાણો૫ x ૯ x ૧૦ ઇંચ (રીસીવર)
વસ્તુનું વજન4.7 ઔંસ
ઉત્પાદકસારી

8. વોરંટી અને સપોર્ટ

For technical support or inquiries regarding this product, please contact wellye customer service. Refer to your purchase documentation for specific warranty details, as warranty terms may vary by retailer and region.

For more information about wellye products, visit the wellye brand store on Amazon.

સંબંધિત દસ્તાવેજો - 5864137387

પ્રિview TX10 રિમોટ કંટ્રોલ ઓપરેશન મેન્યુઅલ અને FCC પાલન
PINGHU WELLYE ELECTRICAL CO., LTD TX10 રિમોટ કંટ્રોલ માટે વિગતવાર ઓપરેશન સૂચનાઓ અને FCC ચેતવણી નિવેદન.
પ્રિview TX6 રિમોટ કંટ્રોલ કાર ઓપરેશન મેન્યુઅલ અને FCC પાલન
PINGHU WELLYE ELECTRICAL CO.,LTD TX6 રિમોટ કંટ્રોલ કાર માટે વપરાશકર્તા માર્ગદર્શિકા, જેમાં ફ્રીક્વન્સી બાઈન્ડિંગ, બટન ફંક્શન્સ અને FCC અનુપાલન માહિતીનો સમાવેશ થાય છે.
પ્રિview TX10 2.4G રિમોટ કંટ્રોલ યુઝર મેન્યુઅલ અને FCC માહિતી
TX10 2.4G રિમોટ કંટ્રોલ માટે વપરાશકર્તા માર્ગદર્શિકા, ઉત્પાદન પરિચય, ફ્રીક્વન્સી મેચિંગ, બટન ફંક્શન્સ અને FCC પાલન નિવેદનોની વિગતો આપે છે. ફ્રીક્વન્સી, અંતર અને કામગીરી માટે સ્પષ્ટીકરણો શામેલ છે.
પ્રિview TX4 રિમોટ કંટ્રોલ ઓપરેશન મેન્યુઅલ અને FCC પાલન
User guide for the PINGHU WELLYE ELECTRICAL CO.,LTD TX4 Remote Control, including setup, button functions, and FCC warning statement.
પ્રિview TX20 2.4G Remote Control User Manual
User manual for the TX20 2.4G remote control, detailing its functions, operation, and FCC compliance information.