Rolair JC20 પોર્ટેબલ એર કોમ્પ્રેસર વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Rolair JC20 Hand Carry Portable Air Compressor. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

The Rolair JC20 is an oilless, 2 horsepower electric air compressor designed for light-duty framing and roofing work. It features a two-cylinder pump, a low-amp draw motor, a heavy-duty roll-cage, integrated cord wrap, upward-facing gauges, and a quarter-turn drain valve, all contributing to its quiet operation at only 70 dB.

2. સલામતી માહિતી

Always observe the following safety precautions to reduce the risk of electric shock, fire, or serious injury.

• બધી સૂચનાઓ વાંચો: Familiarize yourself with the compressor's controls and proper operation.
• ઇલેક્ટ્રિકલ સલામતી: ખાતરી કરો કે પાવર સ્ત્રોત કોમ્પ્રેસરના વોલ્યુમ સાથે મેળ ખાય છેtage (115 Volts AC). Do not operate in wet conditions. Always use a grounded outlet.
• વ્યક્તિગત રક્ષણાત્મક સાધનો: Wear safety glasses or goggles when operating the compressor or using air tools. Hearing protection is recommended, especially during prolonged use.
• સંચાલન પર્યાવરણ: Operate the compressor in a well-ventilated area. Keep children and bystanders away. Do not operate near flammable liquids or gases.
• દબાણ સલામતી: Never exceed the maximum operating pressure of any air tool or accessory. Do not attempt to modify the pressure relief valve.
• જાળવણી: કોઈપણ જાળવણી કે સમારકામ કરતા પહેલા પાવર ડિસ્કનેક્ટ કરો.
• ગરમ સપાટીઓ: The compressor pump and motor can become hot during operation. Avoid contact with hot surfaces.

3. મુખ્ય લાક્ષણિકતાઓ અને ઘટકો

The Rolair JC20 is engineered with several features for performance and durability:

• સુપર શાંત કામગીરી: સિંગલ-એસtage oilless design with only 70 dB noise level.
• ટકાઉ પંપ: Cast aluminum cylinder with stainless steel reed valves.
• કાર્યક્ષમ મોટર: 1700 RPM low-amp draw motor with automatic overload protection.
• Protective Roll-Cage: Heavy-duty design to protect the pump and motor.
• ઇન્ટિગ્રેટેડ કોર્ડ રેપ: અનુકૂળ સંગ્રહ અને પરિવહન માટે.
• Upward-Facing Gauges: For easy monitoring of tank and regulated pressure.
• Quarter-Turn Drain Valve: For easy moisture drainage from the tank.

આકૃતિ 3.1: ફ્રન્ટ view of the Rolair JC20 Air Compressor, showing the green tank, motor, gauges, and protective roll-cage.

આકૃતિ 3.2: કોણીય view highlighting the two-cylinder pump heads and motor assembly.

આકૃતિ 3.3: બાજુ view of the Rolair JC20, illustrating the compact design and component layout within the roll-cage.

4. સેટઅપ

1. અનપેકીંગ: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage to your dealer immediately.
2. પ્લેસમેન્ટ: Place the compressor on a firm, level surface in a clean, dry, and well-ventilated area. Ensure adequate clearance around the unit for air circulation.
3. ઇલેક્ટ્રિકલ કનેક્શન:
   • ચકાસો કે પાવર સપ્લાય વોલtage matches the compressor's requirements (115 Volts AC).
   • Plug the power cord into a grounded electrical outlet. Avoid using extension cords if possible. If an extension cord is necessary, use a heavy-duty, grounded cord of appropriate gauge for the distance.
4. પ્રારંભિક ડ્રેનેજ: Before first use, ensure the quarter-turn drain valve at the bottom of the tank is closed.

5. ઓપરેટિંગ સૂચનાઓ

1. પાવર ચાલુ: Locate the ON/OFF switch (typically a rocker switch or pressure switch) and turn the compressor ON. The compressor will begin to build pressure.
2. Pressure Build-Up: Allow the compressor to run until it reaches its maximum pressure and the motor automatically shuts off. This indicates the tank is fully charged.
3. કનેક્ટિંગ એર ટૂલ્સ:
   • Attach your air hose to the quick-connect coupler on the compressor.
   • તમારા એર ટૂલને નળીના બીજા છેડા સાથે જોડો.
4. આઉટપુટ પ્રેશર એડજસ્ટ કરવું: Use the pressure regulator knob to set the desired output pressure for your air tool. Monitor the regulated pressure gauge.
5. ઓપરેશન: Begin using your air tool. The compressor will cycle on and off automatically to maintain tank pressure as air is consumed.
6. પાવર બંધ: When finished, turn the compressor OFF using the ON/OFF switch.
7. દબાણ ઘટાડવું: Disconnect the air hose and tool. Allow any remaining air in the tank to escape through the drain valve or by briefly opening the regulator.

6. જાળવણી

Regular maintenance ensures the longevity and optimal performance of your Rolair JC20 compressor. Always disconnect the power before performing maintenance.

• Daily: Drain Moisture from Tank:
  • With the compressor off and tank depressurized, open the quarter-turn drain valve located at the bottom of the tank.
  • Allow all accumulated moisture to drain completely.
  • Close the drain valve securely.
• Weekly/Monthly: Inspect Air Filter:
  • Check the air intake filter for dirt and debris.
  • Clean or replace the filter as necessary. A clogged filter can reduce compressor performance and lifespan.
• Periodically: Inspect for Leaks:
  • With the compressor pressurized, apply a soapy water solution to all fittings and connections.
  • Bubbles indicate a leak. Tighten connections or replace seals as needed.
• સંગ્રહ: Store the compressor in a clean, dry location. Ensure the tank is drained of moisture before storage.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For warranty information, please refer to the documentation included with your purchase or visit the official Rolair website. For technical support, parts, or service inquiries, please contact Rolair customer service or your authorized dealer.

ઉત્પાદક: ROLAIR

સંપર્ક માહિતી: Please refer to the contact details provided on the Rolair official website or your purchase receipt for the most current support options.