પરિચય
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the Danfoss EV251B Solenoid Valve. Please read this manual thoroughly before attempting any installation or operation procedures. Retain this manual for future reference.
સલામતી માહિતી
Always observe general safety precautions when working with electrical and pressurized systems. Failure to follow these instructions may result in property damage, serious injury, or death.
- Ensure power supply is disconnected before installation, maintenance, or repair.
- Verify that the valve specifications match the system requirements.
- ઇન્સ્ટોલેશન અને સર્વિસ ફક્ત લાયક કર્મચારીઓ દ્વારા જ થવી જોઈએ.
- યોગ્ય વ્યક્તિગત રક્ષણાત્મક સાધનો (PPE) પહેરો.
- Do not exceed the maximum operating pressure or temperature specified for the valve.
ઉત્પાદન ઓવરview
The Danfoss EV251B is a 2/2-way assisted lift operated solenoid valve designed for various industrial applications. It features a G1 outlet connection type and an NBR seal, suitable for specific media and temperature ranges. The valve operates on a 230V, 50Hz power supply.
આકૃતિ 1: Danfoss EV251B Solenoid Valve. This image displays the brass valve body with a blue solenoid coil attached to the top. A black square gasket and a screw are shown in the foreground, indicating components for assembly or sealing.
વિશિષ્ટતાઓ
| મોડલ | EV251B |
| ભાગ નંબર | 032U538331 |
| પ્રકાર | 2/2-way, Assisted Lift Operated |
| ઓરિફિસનું કદ | 7/8 ઇંચ |
| કનેક્શનનો પ્રકાર | G1 (Outlet) |
| સીલ સામગ્રી | NBR (નાઈટ્રાઈલ બ્યુટાડીન રબર) |
| ભાગtage | 230V AC |
| આવર્તન | 50Hz |
| બ્રાન્ડ | ડેનફોસ |
| ઉત્પાદક | Kempston Controls |
| ASIN | B07HCDVTQN |
સેટઅપ અને ઇન્સ્ટોલેશન
1. પ્રી-ઇન્સ્ટોલેશન તપાસો
- Inspect the valve for any signs of damage during shipping.
- ઇન્સ્ટોલેશન પહેલાં ખાતરી કરો કે સિસ્ટમ ડિપ્રેસરાઇઝ્ડ અને ડ્રેનેજ થયેલ છે.
- Verify that the flow direction arrow on the valve body matches the system flow.
2. માઉન્ટ કરવાનું
- Mount the valve in a position that allows for easy access for maintenance.
- Ensure the valve is installed vertically with the coil pointing upwards for optimal performance, unless otherwise specified for specific applications.
- Use appropriate pipe sealant on threaded connections to prevent leaks. Do not overtighten.
3. વિદ્યુત જોડાણ
- Ensure the power supply matches the coil voltage (230V AC, 50Hz).
- Connect the electrical wiring according to local electrical codes and the wiring diagram provided with the coil.
- Secure all electrical connections to prevent accidental disconnection or short circuits.
ઓપરેટિંગ સૂચનાઓ
The Danfoss EV251B is an assisted lift operated valve. This means it requires a minimum pressure differential to fully open or close, but can operate from zero differential pressure due to the assisted lift mechanism. When the coil is energized, the valve opens, allowing fluid flow. When de-energized, the valve closes, stopping flow.
- પ્રારંભિક સ્ટાર્ટ-અપ: After installation, slowly pressurize the system and check for leaks.
- ઓપરેશન: રેટ કરેલ વોલ્યુમ લાગુ કરોtage to the coil to open the valve. Remove voltage to close the valve.
- પ્રવાહ નિયંત્રણ: This valve is designed for ON/OFF control and is not intended for throttling applications.
જાળવણી
Regular maintenance ensures optimal performance and extends the lifespan of the valve. Always de-energize the coil and depressurize the system before performing any maintenance.
1. સફાઈ
- Periodically inspect the valve for external dirt or debris. Clean with a soft cloth.
- If internal cleaning is required, disassemble the valve carefully, clean components with appropriate solvents compatible with NBR seals, and reassemble.
2. નિરીક્ષણ
- Check for leaks around connections and the valve body.
- Inspect the coil for signs of overheating or damage.
- Examine the NBR seals for wear, cracks, or degradation. Replace if necessary.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| વાલ્વ ખુલતો નથી | No power to coil; Incorrect voltage; Coil failure; Obstruction in valve. | Check power supply and connections; Verify voltage; Replace coil; Inspect and clean valve internals. |
| વાલ્વ બંધ થતો નથી | Debris preventing closure; Worn seal; Coil remains energized. | Clean valve internals; Replace seal; Check electrical circuit for continuous power. |
| Leakage from valve | Loose connections; Damaged seals; Cracked valve body. | Tighten connections; Replace seals; Replace valve if body is cracked. |
વોરંટી માહિતી
Danfoss products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and purchase date. Please refer to your purchase documentation or contact Danfoss customer support for detailed warranty information.
ગ્રાહક આધાર
For technical assistance, spare parts, or further inquiries regarding your Danfoss EV251B Solenoid Valve, please contact your local Danfoss representative or visit the official Danfoss website. Ensure you have the model number (EV251B) and part number (032U538331) available when seeking support.
તમે વધુ માહિતી અને સંપર્ક વિગતો પર મેળવી શકો છો Danfoss Store.
