શાર્પ એટોમિક ક્લોક સૂચના માર્ગદર્શિકા

પરિચય

The Sharp Atomic Clock provides precise timekeeping and temperature monitoring for your home or office. Featuring a large, easy-to-read display, this clock automatically synchronizes with the atomic time signal (WWVB) broadcast from Fort Collins, Colorado, ensuring accuracy without manual adjustments. It also includes a wireless outdoor sensor to display both indoor and outdoor temperatures.

ઉત્પાદન લક્ષણો

• Atomic Time Accuracy: Automatically synchronizes with the WWVB atomic time signal for precise timekeeping.
• Jumbo 3" Easy-to-Read Numbers: Large digital display for clear visibility of time, date, and temperature.
• Indoor/Outdoor Temperature Display: Monitors both indoor ambient temperature and outdoor temperature via a wireless sensor.
• વાયરલેસ આઉટડોર સેન્સર: Transmits outdoor temperature data to the main unit.
• બેટરી સંચાલિત: Operates on batteries for flexible placement (batteries not included).
• ઓટોમેટિક ડેલાઇટ સેવિંગ ટાઇમ (DST) એડજસ્ટમેન્ટ: Automatically adjusts for daylight saving time changes.
• પસંદ કરી શકાય તેવા સમય ઝોન: Allows selection of various US time zones.
• 12/24 કલાકનું ફોર્મેટ: ૧૨-કલાક અથવા ૨૪-કલાકના ફોર્મેટમાં સમય દર્શાવવાનો વિકલ્પ.
• Celsius/Fahrenheit Display: Switch between Celsius and Fahrenheit temperature units.

પેકેજ સામગ્રી

Please ensure all items are present before proceeding with setup.

• Sharp Atomic Clock Main Unit
• વાયરલેસ આઉટડોર સેન્સર
• સૂચના માર્ગદર્શિકા

Note: Batteries are not included. The main unit requires 2 AA batteries, and the outdoor sensor requires 2 AA batteries.

સેટઅપ

1. બેટરી ઇન્સ્ટોલેશન

1. Open the battery compartment on the back of the main clock unit.
2. યોગ્ય ધ્રુવીયતા (+ અને -) અવલોકન કરીને, 2 AA બેટરી દાખલ કરો.
3. બેટરી કમ્પાર્ટમેન્ટ કવર બંધ કરો.
4. Open the battery compartment on the wireless outdoor sensor.
5. Insert 2 AA batteries into the outdoor sensor, observing the correct polarity.
6. Close the outdoor sensor's battery compartment cover.

2. Initial Synchronization and Settings

After battery installation, the clock will attempt to receive the WWVB atomic time signal and connect to the outdoor sensor. This process may take several minutes or up to 24 hours depending on your location and environmental interference.

• સમય ક્ષેત્ર: Press the "TIME ZONE" button (often labeled "UP TIME ZONE") on the back of the clock to cycle through available time zones (PST, MST, CST, EST). Select your desired time zone.
• 12/24 કલાકનું ફોર્મેટ: Press the "12/24" button to switch between 12-hour and 24-hour display.
• સેલ્સિયસ/ફેરનહીટ: Press the "°C/°F" button to toggle between Celsius and Fahrenheit temperature display.
• Outdoor Sensor Pairing: If the outdoor temperature does not appear, press the "CHANNEL" button on the main unit to search for the sensor signal. Ensure the outdoor sensor is within range and not obstructed.

For optimal signal reception, place the clock away from large metal objects, electronic devices, and areas with heavy concrete or brick walls. The outdoor sensor should be placed in a shaded, dry location, protected from direct sunlight and precipitation, for accurate readings.

Image: The Sharp Atomic Clock main unit displaying time, indoor temperature, date, and outdoor temperature, alongside its wireless outdoor sensor.

ઓપરેશન

માહિતી દર્શાવો

The clock's large LCD screen displays the following information:

• સમય: Current time in selected 12-hour or 24-hour format.
• PM સૂચક: Displays "PM" for afternoon hours in 12-hour format.
• Atomic Signal Indicator: Shows the status of the WWVB atomic time signal reception.
• ઇન્ડોર તાપમાન: Current temperature measured by the main unit.
• Month/Date/Day: Current calendar information.
• આઉટડોર તાપમાન: Current temperature measured by the wireless outdoor sensor.
• Outdoor Sensor Channel: Indicates the channel the outdoor sensor is transmitting on.
• બેટરી લો સૂચક: An icon will appear when batteries are low and need replacement.

Button Functions (Rear Panel)

જાળવણી

• બેટરી રિપ્લેસમેન્ટ: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones.
• સફાઈ: Clean the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• આઉટડોર સેન્સર પ્લેસમેન્ટ: Periodically check the outdoor sensor's location to ensure it remains protected from extreme weather conditions, direct sunlight, and moisture.

મુશ્કેલીનિવારણ

• Clock not syncing with atomic time:
  • Ensure the clock is placed away from electronic interference (TVs, computers, microwaves).
  • Try placing the clock near a window facing Fort Collins, Colorado (if applicable to your region).
  • Press the "WAVE" button to initiate a manual signal search.
  • Allow up to 24 hours for initial synchronization.
• Outdoor temperature not displaying or incorrect:
  • Check batteries in the outdoor sensor.
  • Ensure the outdoor sensor is within the effective transmission range (typically up to 100 feet, line of sight).
  • Press the "CHANNEL" button on the main unit to re-establish connection.
  • Verify the outdoor sensor is placed in a location protected from direct sunlight and rain, which can affect readings.
• ડિસ્પ્લે ઝાંખું અથવા ખાલી છે:
  • Replace all batteries in the main unit with fresh ones.
  • ખાતરી કરો કે બેટરીઓ યોગ્ય ધ્રુવીયતા સાથે દાખલ કરવામાં આવી છે.
• Incorrect time or date:
  • Verify the correct time zone is selected.
  • Check if Daylight Saving Time (DST) setting is correct for your region.
  • If atomic signal is not received, manually set the time and date using the "TIME" and "CALENDAR" buttons.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

Sharp products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Sharp webસાઇટ. વોરંટી દાવાઓ માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.