SEBSON 2_X_BWM_ALARM_B

SEBSON Motion Sensor with Alarm and Chime

Model: 2_X_BWM_ALARM_B

સૂચના માર્ગદર્શિકા

1. પરિચય

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Motion Sensor with Alarm and Chime. Please read this manual thoroughly before using the device to ensure proper function and safety.

The SEBSON Motion Sensor is designed to detect movement of people, large animals, and vehicles within its detection field. It can function as either an alarm or a chime, making it suitable for various applications such as entry alerts or security notifications.

2. સલામતી સૂચનાઓ

  • Ensure the device is installed in a dry, indoor environment. Avoid exposure to moisture or extreme temperatures.
  • Use only 9V alkaline batteries. Do not mix old and new batteries, or different types of batteries.
  • સ્થાનિક નિયમો અનુસાર વપરાયેલી બેટરીનો નિકાલ કરો.
  • Do not attempt to open or modify the device. This may void the warranty and pose a safety risk.
  • ઉપકરણને બાળકોની પહોંચથી દૂર રાખો.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

  • 2 x SEBSON Motion Sensor units
  • 4 x માઉન્ટિંગ સ્ક્રૂ
  • 4 x Wall Plugs (Ø6mm)

Note: 9V batteries are not included and must be purchased separately.

4. ઉત્પાદન ઓવરview

The SEBSON Motion Sensor consists of the main sensor unit and a rotatable mounting bracket. Key components include the motion detection lens, the speaker grille, and the mode selection switch.

Two SEBSON Motion Sensors with Alarm and Chime

Image: Two SEBSON Motion Sensor units, showing their compact design and white casing.

Close-up of the SEBSON Motion Sensor showing the mode switch

છબી: વિગતવાર view of the motion sensor, highlighting the mode switch with 'CHIME', 'OFF', and 'ALARM' settings.

5. સેટઅપ

5.1 બેટરી ઇન્સ્ટોલેશન

  1. Gently slide open the battery compartment cover located on the back of the sensor unit.
  2. Insert two 9V alkaline batteries, ensuring correct polarity (+/-).
  3. બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.
Diagram showing battery installation and mounting bracket assembly

Image: Exploded diagram illustrating how to open the battery compartment and insert batteries, along with the separate mounting bracket.

5.2 સેન્સર માઉન્ટ કરવાનું

  1. Choose a suitable location for the sensor. The detection range is 8 meters with a 60° angle. Consider areas where movement needs to be monitored.
  2. Mark the positions for the mounting screws on the wall using the mounting bracket as a template.
  3. Drill two holes (Ø6mm) at the marked positions.
  4. ડ્રિલ્ડ છિદ્રોમાં પ્રદાન કરેલ દિવાલ પ્લગ દાખલ કરો.
  5. આપેલા સ્ક્રૂનો ઉપયોગ કરીને માઉન્ટિંગ બ્રેકેટને દિવાલ સાથે જોડો.
  6. Slide the motion sensor unit onto the mounted bracket. The sensor housing can be rotated 360° within the bracket to adjust the detection area.
Diagram illustrating the 8-meter detection range and 60-degree angle of the motion sensor, with 360-degree rotation capability

Image: Technical diagram showing the sensor's 8-meter detection range, 60-degree detection angle, and the 360-degree rotation feature of the sensor unit within its bracket.

6. ઓપરેટિંગ સૂચનાઓ

The SEBSON Motion Sensor features a three-position switch to select its operating mode:

  • CHIME Mode: When movement is detected, the sensor will emit a short, pleasant chime sound. This mode is ideal for entry alerts in shops or offices.
  • બંધ મોડ: The sensor is powered off and will not detect movement or emit any sound.
  • ALARM Mode: When movement is detected, the sensor will emit a loud alarm sound. This mode is suitable for security purposes.

To select a mode, slide the switch on the side of the sensor to the desired position (CHIME, OFF, or ALARM).

Close-up of the SEBSON Motion Sensor showing the mode switch with CHIME, OFF, and ALARM settings

છબી: વિગતવાર view of the sensor's side, clearly showing the three-position switch for selecting between Chime, Off, and Alarm modes.

7. જાળવણી

  • સફાઈ: Wipe the sensor's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • બેટરી રિપ્લેસમેન્ટ: If the sound becomes weak or the sensor stops responding, replace the 9V batteries. Follow the battery installation steps in Section 5.1.
  • લેન્સની સંભાળ: Keep the motion detection lens clean and free from obstructions to ensure optimal performance.

8. મુશ્કેલીનિવારણ

સમસ્યાસંભવિત કારણઉકેલ
સેન્સર હલનચલન શોધી શકતું નથી.
  • બેટરી ખાલી થઈ ગઈ છે અથવા ખોટી રીતે દાખલ કરવામાં આવી છે.
  • Sensor is in OFF mode.
  • Detection lens is obstructed or dirty.
  • Object is outside detection range/angle.
  • બેટરી બદલો અથવા પોલેરિટી તપાસો.
  • Slide switch to CHIME or ALARM mode.
  • Clean the detection lens.
  • Adjust sensor position or angle.
Sound is too low or distorted.
  • બેટરી ઓછી છે.
  • Speaker grille is obstructed.
  • બેટરી બદલો.
  • Ensure speaker grille is clear.
ખોટા એલાર્મ.
  • Sensor is detecting unwanted movement (e.g., pets, moving curtains).
  • Direct sunlight or heat sources interfering with detection.
  • Adjust sensor angle or relocate to avoid unwanted detection.
  • Reposition sensor away from direct sunlight or heat sources.

9. સ્પષ્ટીકરણો

લક્ષણવિગત
બ્રાન્ડસેબસન
મોડલ નંબર2_X_BWM_ALARM_B
પાવર સ્ત્રોતBattery Powered (2x 9V batteries, not included)
Battery Type Recommendedઆલ્કલાઇન
તપાસ શ્રેણી8 મીટર સુધી
શોધ કોણ60 ડિગ્રી
પરિભ્રમણ ક્ષમતા360 degrees (within bracket)
માઉન્ટિંગ પ્રકારવોલ માઉન્ટ
રંગસફેદ
પરિમાણો (પેકેજ)12 x 9 x 8 સેમી
વજન (વસ્તુ)280 ગ્રામ

10. વોરંટી અને સપોર્ટ

SEBSON products are designed and manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or assistance with your device, please contact SEBSON customer service through their official webસાઇટ અથવા રિટેલર જ્યાંથી ઉત્પાદન ખરીદવામાં આવ્યું હતું.

કૃપા કરીને વોરંટી દાવા માટે તમારી ખરીદીનો પુરાવો જાળવી રાખો.

સંબંધિત દસ્તાવેજો - 2_X_BWM_ALARM_B

પ્રિview SEBSON IR_ESO_F Infrared Motion Detector Installation and User Manual
Comprehensive guide for the SEBSON IR_ESO_F infrared motion detector, covering installation, operation, safety, and technical specifications. Learn how to effectively use this motion detector for lighting control.
પ્રિview SEBSON IR Motion Detector (IR_ES_G / IR_ES_GA) Installation and User Manual
Comprehensive guide for installing and using the SEBSON IR Motion Detector (IR_ES_G / IR_ES_GA), including safety instructions, technical specifications, detection range, and WEEE disposal information.
પ્રિview SEBSON IR Motion Detector IR_WAL_E: User Manual and Installation Guide
Comprehensive user manual and installation guide for the SEBSON IR_WAL_E infrared motion detector. Learn about its features, safety precautions, installation steps, technical specifications, and proper disposal.
પ્રિview SEBSON IR WAL C Motion Detector: Installation Guide, Features, and Technical Specifications
Comprehensive guide for the SEBSON IR WAL C infrared motion detector. Learn about its intended use, safety precautions, installation steps, operational features, technical data, and disposal information.
પ્રિview SEBSON IR Motion Detector (IR_OUT_E, IR_OUT_EA) - Installation and User Manual
Comprehensive guide for the SEBSON IR Motion Detector models IR_OUT_E and IR_OUT_EA, covering installation, safety, features, technical specifications, and maintenance. Learn how to install and operate your motion detector for optimal performance.
પ્રિview SEBSON HD GS412 Hitzemelder – Bedienungsanleitung und Installationshinweise
Umfassende Bedienungsanleitung für den SEBSON HD GS412 Hitzemelder. Erfahren Sie mehr über Installation, Funktion, Vernetzung und Sicherheitshinweise für Ihren Hitzemelder.