ANSMANN HD70B LED Headlamp વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

Thank you for choosing the ANSMANN HD70B LED Headlamp. This manual provides essential information for the safe and efficient use of your headlamp. Please read it thoroughly before operation and retain it for future reference.

The ANSMANN HD70B is a versatile and lightweight lighting solution, designed for various activities such as camping, emergencies, work, reading, boating, sports, and cycling. Its robust, splash-proof (IP44) casing ensures durability in diverse environments. Constructed from durable ABS plastic, the headlamp weighs only 66g (including battery), providing optimal comfort for extended wear. The adjustable elastic headband ensures a secure and comfortable fit for both children and adults. The lamp's tilt angle can be adjusted up to 45° for precise illumination.

પેકેજ સામગ્રી:

• 1 x ANSMANN HD70B LED Headlamp (મોડલ 1600-0260)
• 1 x AA Mignon Battery
• 1 x વપરાશકર્તા માર્ગદર્શિકા

2. સલામતી સૂચનાઓ

• એલઇડી લાઇટ બીમમાં સીધા ન જુઓ.
• બાળકોની પહોંચથી દૂર રાખો.
• જૂની અને નવી બેટરીઓ અથવા વિવિધ પ્રકારની બેટરીઓનું મિશ્રણ કરશો નહીં.
• જો હેડલ હોય તો બેટરીઓ દૂર કરોamp will not be used for an extended period to prevent leakage.
• સ્થાનિક નિયમો અનુસાર બેટરીનો નિકાલ કરો.
• હેડલamp is IP44 splash-proof; do not immerse it in water.

3. સેટઅપ

3.1 બેટરી ઇન્સ્ટોલેશન

1. Locate the battery compartment on the back of the headlamp એકમ
2. Carefully open the battery compartment cover. This typically involves sliding a latch or gently prying open a tab. If you encounter resistance, ensure no screws are present and apply gentle, even pressure.
3. Insert one AA Mignon battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. બેટરી કમ્પાર્ટમેન્ટ કવરને સુરક્ષિત રીતે બંધ કરો જ્યાં સુધી તે જગ્યાએ ક્લિક ન થાય.

Figure 1: The ANSMANN HD70B LED Headlamp. The battery compartment is located on the rear of the main light unit.

૪.૧ હેડબેન્ડ ગોઠવવું

The elastic headband is adjustable to fit various head sizes. Slide the buckles on either side of the headband to achieve a comfortable and secure fit.

૮.૩ ટિલ્ટ એંગલ એડજસ્ટ કરવું

હેડલamp unit can be tilted up to 45° to direct the light beam precisely where needed. Gently push or pull the light unit to adjust its angle.

આકૃતિ ૪.૩: હેડલamp features a 45° swivel joint for adjustable light direction.

4. ઓપરેશન

હેડલamp is operated via a single button located on the top of the unit.

4.1 Powering On/Off and Switching Modes

• પ્રથમ પ્રેસ: Activates the Main LED at 100% power (65 lumens). This mode provides a strong, long-range beam.
• બીજું પ્રેસ: Switches to Main LED at 25% power (16 lumens). This mode offers extended battery life with sufficient illumination for close-range tasks.
• ત્રીજું પ્રેસ: Activates the Auxiliary LEDs (12 lumens). This mode provides a wider, softer light for peripheral vision and close-up work.
• ચોથું પ્રેસ: હેડલ ફેરવે છેamp બંધ.

હેડલamp is also dimmable, allowing for fine-tuning of light output within each mode by holding the button (specific dimming instructions may vary slightly; refer to practical use).

આકૃતિ ૪.૩: હેડલamp is IP44 splash-proof and features a powerful LED.

5. જાળવણી

5.1 સફાઈ

હેડલ સાફ કરોamp સોફ્ટ સાથે, ડીamp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment is dry before closing.

5.2 બેટરી રિપ્લેસમેન્ટ

When the light output becomes dim or the headlamp stops functioning, replace the AA battery following the instructions in Section 3.1. Always use a fresh, high-quality AA battery.

5.3 સંગ્રહ

હેડલ સ્ટોર કરોamp in a cool, dry place. If storing for an extended period, remove the battery to prevent potential leakage and damage to the device.

6. મુશ્કેલીનિવારણ

• શીર્ષકamp ચાલુ નથી:
  • Check if the battery is inserted correctly with the correct polarity.
  • Ensure the battery compartment cover is fully closed.
  • બેટરીને નવી સાથે બદલો.
• Difficulty opening the battery compartment:
  • Ensure you are not forcing it. Look for a small latch or a designated sliding area. Some compartments require a firm but gentle slide or a slight prying motion with a fingernail or small, flat tool at a specific point. Refer to any diagrams on the product packaging if available.
• મંદ પ્રકાશ આઉટપુટ:
  • The battery may be low. Replace it with a fresh AA battery.
  • હેડલની ખાતરી કરોamp is not in a lower power mode (e.g., Main LED 25% or Auxiliary LEDs). Cycle through the modes to check.

7. સ્પષ્ટીકરણો

8. વોરંટી અને સપોર્ટ

ANSMANN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official ANSMANN webસાઇટ. કોઈપણ વોરંટી દાવા માટે કૃપા કરીને ખરીદીનો પુરાવો રાખો.