ફીલ્ડપીસ SM380V SMAN મેનીફોલ્ડ યુઝર મેન્યુઅલ

પરિચય

The Fieldpiece SM380V is a three-port digital manifold with an integrated micron gauge, designed for HVAC/R professionals. This advanced tool replaces the SMAN300 series and offers enhanced features for accurate system diagnostics and servicing. It provides comprehensive data at a glance, streamlining workflows and ensuring reliable results.

મુખ્ય લાક્ષણિકતાઓમાં શામેલ છે:

• Integrated Micron Gauge (3 Port)
• Wireless connectivity with a range of 350 feet
• Rugged construction for field use
• Data Logging capability (up to 9 jobs, 7 days continuous)
• Tightness Test function with temperature compensation
• Customizable settings for auto power off, backlight, and units of measurement

આકૃતિ 1: ફ્રન્ટ view of the Fieldpiece SM380V SMAN Manifold, displaying its digital screen, control buttons, and three ports at the bottom.

સલામતી માહિતી

Always read and understand all safety precautions before operating the Fieldpiece SM380V. Failure to follow these instructions may result in injury or damage to the device.

• વ્યક્તિગત રક્ષણાત્મક સાધનો: Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, when working with refrigerants and HVAC/R systems.
• રેફ્રિજન્ટ હેન્ડલિંગ: Handle refrigerants with extreme care. Refer to local regulations and industry standards for safe handling and disposal.
• દબાણ સલામતી: Never exceed the maximum pressure ratings of the manifold or the system being tested. Ensure all connections are secure before applying pressure.
• બેટરી સલામતી: Use only the specified battery type (6 AA batteries). Do not mix old and new batteries, or different types of batteries. Dispose of batteries according to local regulations.
• પર્યાવરણીય પરિસ્થિતિઓ: Operate the device within its specified environmental limits. Avoid exposure to extreme temperatures, moisture, or corrosive substances.
• સર્વિસિંગ: Do not attempt to service the unit beyond routine maintenance. Refer all servicing to qualified personnel.

બૉક્સમાં શું છે

પેકેજ ખોલતી વખતે, ખાતરી કરો કે નીચેની બધી વસ્તુઓ હાજર છે:

• Fieldpiece SM380V SMAN Manifold
• Micron gauge (integrated)
• 6 AA batteries (pre-installed or included separately)
• વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)

સેટઅપ

1. બેટરી ઇન્સ્ટોલેશન

The SM380V requires 6 AA batteries for operation. These are typically included. To install or replace batteries:

1. Locate the battery compartment on the rear of the manifold.
2. બેટરી કવર ખોલો.
3. Insert 6 AA batteries, ensuring correct polarity as indicated inside the compartment.
4. બેટરી કવર સુરક્ષિત રીતે બંધ કરો.

2. પ્રારંભિક પાવર ચાલુ

દબાવો પાવર button to turn on the manifold. The display will illuminate and show the default measurement screen.

3. Unit Selection (Optional)

To customize units of measurement (e.g., pressure, temperature):

1. દબાવો મેનુ બટન
2. Navigate to the "Units" or "Settings" option using the arrow buttons.
3. દબાવો દાખલ કરો પસંદ કરવા માટે.
4. Adjust individual units as desired and confirm changes.

ઓપરેટિંગ સૂચનાઓ

1. Connecting to a System

The SM380V features three ports for connecting to HVAC/R systems:

• Low Side Port: Typically connected to the suction line.
• High Side Port: Typically connected to the liquid line.
• સેવા પોર્ટ: Used for vacuum, charging, or recovery.

Ensure all hoses are properly connected and tightened before opening valves or applying pressure.

2. માપન લેવું

Once connected, the SM380V will display real-time pressure and temperature readings. Use the VIEW button to cycle through different display modes, such as superheat, subcooling, and micron readings.

The integrated micron gauge provides precise vacuum measurements, crucial for proper system evacuation.

3. ડેટા લોગીંગ

The SM380V can log up to 9 jobs internally, with continuous logging for up to 168 hours (7 days). To initiate data logging:

1. દબાવો મેનુ બટન
2. Select "Data Logging" and press દાખલ કરો.
3. Follow the on-screen prompts to start a new log or view existing logs.
4. Logged data can be downloaded via the USB port for further analysis.

4. Tightness Test

Perform a tightness test to check for leaks after repairs or installations:

1. દબાવો TEST TIGHTNESS બટન
2. The manifold will display the pressure differential over time and track the duration of the test.
3. The test is temperature compensated to avoid false positives, especially when using an SL temp probe.

5. Wireless Measurements

The SM380V can receive wireless measurements from compatible Fieldpiece probes (e.g., Joblink probes). Ensure wireless functionality is enabled on both the manifold and the probes. Refer to the specific probe's manual for pairing instructions.

જાળવણી

સફાઈ

Wipe the manifold with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the ports are free of debris before and after use.

સંગ્રહ

Store the SM380V in its protective case in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.

માપાંકન

Regular calibration ensures the accuracy of your SM380V. Refer to Fieldpiece's official website or contact customer support for recommended calibration intervals and procedures.

મુશ્કેલીનિવારણ

If the problem persists, contact Fieldpiece customer support for assistance.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

Fieldpiece products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Fieldpiece webસાઇટ. વોરંટી દાવાઓ માટે તમારી ખરીદીનો પુરાવો રાખો.

For technical support, troubleshooting assistance, or service inquiries, please contact Fieldpiece customer support through their official webસાઇટ અથવા તમારા ઉત્પાદન પેકેજિંગમાં આપેલી સંપર્ક માહિતી.

Note: This manual provides general instructions. Specific features and operations may vary slightly. Always refer to the latest information available from Fieldpiece.