સલામતી માહિતી
Read and understand all instructions before beginning installation. Failure to follow these instructions could result in electric shock, fire, or serious personal injury.
- Ensure the installation site is structurally sound and can support the fan's weight (approximately 21 lbs).
- બધા વાયરિંગ રાષ્ટ્રીય અને સ્થાનિક ઇલેક્ટ્રિકલ કોડ્સ અનુસાર હોવા જોઈએ. જો તમે વાયરિંગથી અજાણ હોવ, તો લાયક ઇલેક્ટ્રિશિયનનો સંપર્ક કરો.
- Disconnect power at the circuit breaker or fuse box before beginning installation or performing any maintenance.
- ક્ષતિગ્રસ્ત બ્લેડ અથવા હાઉસિંગથી પંખો ચલાવશો નહીં.
- Maintain a minimum clearance of 7 feet from the floor to the bottom edge of the fan blades.
- આ પંખો ફક્ત અંદરના ઉપયોગ માટે જ બનાવવામાં આવ્યો છે.
સેટઅપ અને ઇન્સ્ટોલેશન
This section guides you through the assembly and installation process of your Hunter ceiling fan.
1. અનપેકિંગ અને નિરીક્ષણ
Carefully remove all components from the packaging. Inspect all parts for any damage. Do not discard packaging materials until assembly is complete and the fan is operating correctly.
2. પંખો લગાવવો
The fan uses a standard profile mounting with included 3-inch and 2-inch downrods. Choose the appropriate downrod length for your ceiling height. Ensure the electrical box is securely mounted and capable of supporting the fan.
Image: Hunter 46-inch ceiling fan installed in a living space, demonstrating typical mounting.
- માઉન્ટિંગ બ્રેકેટને સીલિંગ ઇલેક્ટ્રિકલ બોક્સ સાથે જોડો.
- Feed electrical wires through the downrod and canopy.
- Attach the downrod to the motor housing.
- Lift the fan assembly and hang it on the mounting bracket.
3. વિદ્યુત જોડાણો
Ensure power is OFF at the circuit breaker before making any electrical connections. Connect the fan's wires to the household wiring according to the wiring diagram provided in the full installation guide (not included here). This fan operates on 120 Volts AC.
4. Attaching Fan Blades
The fan includes 5 reversible Medium Density Fiberboard (MDF) blades with Warm Grey Oak and Greyed Walnut finishes. Choose your preferred finish before attaching the blades.
છબી: ક્લોઝ-અપ view of the fan's motor housing with the Hunter logo and a blade arm attached, showing the connection point.
- Attach each blade to a blade arm using the provided screws.
- Secure the blade arms to the motor housing.
Image: Left shows the Warm Grey Oak side of a fan blade. Right shows the Greyed Walnut side of a fan blade, demonstrating the reversible design.
5. લાઇટ કીટ સ્થાપિત કરી રહ્યા છીએ
The fan includes an integrated light kit with premium painted cased white glass shading and two 9-watt energy-efficient, dimmable LED bulbs (E26/A19 base).
Image: Close-up of the fan's light kit, showing the frosted white glass shade and the two pull chains for fan speed and light control.
- Connect the light kit wires to the fan motor wires.
- Secure the light kit assembly to the fan motor housing.
- Install the LED bulbs into the sockets.
- Attach the glass shade to the light kit.
ઓપરેટિંગ સૂચનાઓ
Your Hunter ceiling fan is controlled by pull chains for both fan speed and light operation.
ચાહક ઝડપ નિયંત્રણ
છબી: વિગતવાર view of the fan's light kit, highlighting the two pull chains. One chain controls the fan speed, and the other controls the light.
- Locate the pull chain designated for fan speed (often marked with a fan icon or a shorter chain).
- Pull the chain once for High speed.
- Pull the chain a second time for Medium speed.
- Pull the chain a third time for Low speed.
- Pull the chain a fourth time to turn the fan OFF.
પ્રકાશ નિયંત્રણ
- Locate the pull chain designated for light control (often marked with a light bulb icon or a longer chain).
- Pull the chain once to turn the light ON.
- Pull the chain a second time to turn the light OFF.
- To dim the light, pull and hold the light chain. Release when the desired brightness is reached.
Reversible Blade Operation (Seasonal Use)
Your fan features reversible blades and a reversible motor for year-round comfort. A switch on the fan motor housing allows you to change the direction of blade rotation.
- Summer Operation: Set the switch to make the blades rotate counter-clockwise. This creates a downward airflow, producing a cooling effect.
- વિન્ટર ઓપરેશન: Set the switch to make the blades rotate clockwise. This creates an upward airflow, recirculating warm air from the ceiling without creating a direct draft.
- Always turn off the fan and wait for the blades to stop completely before changing the direction switch.
જાળવણી
નિયમિત જાળવણી તમારા સીલિંગ ફેનની ટકાઉપણું અને શ્રેષ્ઠ કામગીરી સુનિશ્ચિત કરે છે.
- સફાઈ: સમયાંતરે પંખાના બ્લેડ અને મોટર હાઉસિંગને સોફ્ટ, ડી વડે સાફ કરો.amp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સનો ઉપયોગ કરશો નહીં, કારણ કે આ ફિનિશને નુકસાન પહોંચાડી શકે છે.
- કડક સ્ક્રૂ: Check all screws on the fan blades, blade arms, and mounting hardware at least twice a year. Tighten any loose screws to prevent wobbling and noise.
- લાઇટ બલ્બ રિપ્લેસમેન્ટ: If a light bulb needs replacement, ensure the power is off. Use only 9-watt LED bulbs with an E26/A19 base, or equivalent.
- કોઈ લુબ્રિકેશન જરૂરી નથી: પંખાનું મોટર કાયમી ધોરણે લ્યુબ્રિકેટેડ હોય છે અને તેને ઓઇલિંગની જરૂર હોતી નથી.
મુશ્કેલીનિવારણ
If you experience issues with your fan, refer to the following common problems and solutions before contacting support.
પંખો શરૂ થતો નથી
- પાવર તપાસો: Ensure the circuit breaker is ON and the wall switch (if applicable) is ON.
- વાયરિંગ કનેક્શન્સ: Verify all electrical connections are secure and correctly wired according to the installation instructions.
- પુલ ચેઇન: Ensure the fan pull chain has been pulled to an ON position.
ફેન વોબલ્સ
- બ્લેડ સ્ક્રૂ: Check that all blade screws are tightened securely.
- Blade Arms: Ensure blade arms are securely attached to the motor.
- માઉન્ટ કરવાનું: Verify the mounting bracket and downrod are securely fastened to the ceiling and electrical box.
- બ્લેડ બેલેન્સ: Uneven blade weight can cause wobbling. Use a balancing kit (often sold separately) if necessary.
લાઇટ કામ કરતું નથી
- બલ્બ ઇન્સ્ટોલેશન: Ensure bulbs are screwed in tightly.
- Bulb Functionality: Test bulbs in a known working fixture or replace with new ones.
- વાયરિંગ: Check light kit wiring connections.
- પુલ ચેઇન: Ensure the light pull chain is in the ON position.
ઘોંઘાટીયા ઓપરેશન
- છૂટક સ્ક્રૂ: Tighten all screws on the fan.
- માઉન્ટ કરવાનું: Ensure the fan is securely mounted and not touching any part of the ceiling.
- ગ્લાસ શેડ: Check if the glass shade is securely fastened and not rattling.
- બ્લેડ ક્લિયરન્સ: Ensure blades are not hitting anything.
વિશિષ્ટતાઓ
Image: Energy Guide label showing estimated yearly energy cost ($10) and airflow (3,133 Cubic Feet Per Minute) for the fan.
| બ્રાન્ડ | શિકારી |
| મોડલ નંબર | CC5C95C84 |
| ઉત્પાદન પરિમાણો | ૧૧"લિ x ૪"પગ x ૧૩"કલો |
| વસ્તુનું વજન | 21.05 પાઉન્ડ |
| રંગ | મેટ બ્લેક |
| સામગ્રી | Metal (Housing), MDF (Blades), Glass (Shade) |
| બ્લેડની સંખ્યા | 5 (Reversible: Warm Grey Oak / Greyed Walnut) |
| પ્રકાશ સ્ત્રોત પ્રકાર | સંકલિત એલઇડી |
| લાઇટ બલ્બ્સ શામેલ છે | 2 x 9 Watt, Dimmable LED (E26/A19 base) |
| તેજ | 800 Lumens (Light Output Maximum) |
| નિયંત્રણ પદ્ધતિ | સાંકળ નિયંત્રણ ખેંચો |
| ચાહકની ગતિ | 3 |
| માઉન્ટિંગ પ્રકાર | Downrod Mount (3" and 2" downrods included) |
| ઇન્ડોર/આઉટડોર વપરાશ | માત્ર ઇન્ડોર |
| ભાગtage | 120 વોલ્ટ |
| હવા પ્રવાહ ક્ષમતા | 2635 ક્યુબિક ફીટ પ્રતિ મિનિટ |
| કાર્યક્ષમતા | Energy Efficient, ETL Certified |
વોરંટી અને આધાર
For specific warranty information regarding your Hunter ceiling fan, please refer to the documentation included with your purchase or visit the official Hunter Fan Company webસાઇટ
If you require technical assistance or have questions not covered in this manual, please contact Hunter Customer Support:
- Hunter Fan Company Official Webસાઇટ: www.hunterfan.com
- ગ્રાહક સેવા: નો સંદર્ભ લો webવર્તમાન સંપર્ક પદ્ધતિઓ (ફોન, ઇમેઇલ, ચેટ) માટેની સાઇટ.
Please have your model number (CC5C95C84) and date of purchase available when contacting support.
