HECHT 752 Tiller Instruction Manual

1. પરિચય

The HECHT 752 is a powerful 2-stroke engine tiller designed for efficient garden cultivation. It is ideal for preparing flower beds, vegetable patches, and loosening soil. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your tiller.

મુખ્ય લક્ષણો:

• Powerful 2-stroke engine with 9000 rpm.
• Equipped with 16 durable blades (4x4 configuration).
• 250 mm working width for effective soil preparation.
• Robust and stable construction for long-lasting performance.
• આરામદાયક કામગીરી માટે એર્ગોનોમિક હેન્ડલ્સ.

2. સલામતી માહિતી

WARNING: Always read and understand all safety warnings and instructions before operating this machine. Failure to follow the warnings and instructions may result in serious injury.

• બાળકોની પહોંચથી દૂર રાખો. આ મશીન રમકડું નથી.
• પર્સનલ પ્રોટેક્ટિવ ઇક્વિપમેન્ટ (PPE): Always wear appropriate safety glasses, hearing protection, sturdy footwear, and gloves when operating the tiller.
• બળતણ સલામતી: Handle gasoline with extreme care. It is highly flammable. Store fuel in approved containers in a well-ventilated area. Never refuel while the engine is running or hot.
• ઓપરેટિંગ શરતો: Do not attempt to till hard, compacted, or virgin soil with this machine as it can cause damage. Tilling wet soil is extremely damaging to the machine and can be dangerous. Use only on prepared or loose soil.
• વિસ્તાર સાફ કરો: Before starting, clear the work area of any stones, debris, or obstacles that could be thrown by the tines.
• નિયંત્રણ જાળવો: Always maintain a firm grip on the handles. Be aware of your surroundings and maintain balance, especially on uneven terrain.
• Engine Heat: The engine and exhaust system become very hot during operation. Avoid contact to prevent burns.
• સ્પંદનો: Prolonged exposure to vibrations can cause injury. Take regular breaks.
• ઉત્પાદકની સૂચનાઓ: Always follow the manufacturer's instructions for safe use, maintenance, and storage.

3. ઉત્પાદન ઓવરview

Familiarize yourself with the components of your HECHT 752 tiller.

Figure 3.1: Tiller Components Diagram
This diagram illustrates the main parts of the HECHT 752 tiller, including the accelerator, starting handle, 2-stroke engine, fuel tank, casing, pointed plow (tines), and wheels. Understanding these components is crucial for proper assembly and operation.

• પ્રવેગક: એન્જિનની ગતિને નિયંત્રિત કરે છે.
• Starting Handle: એન્જિન જાતે શરૂ કરવા માટે વપરાય છે.
• 2-Stroke Engine: The power unit of the tiller.
• ઇંધણ ટાંકી: Holds the gasoline-oil mixture.
• Casing: આંતરિક ઘટકોનું રક્ષણ કરે છે.
• Tines (Pointed Plow): The rotating blades that cultivate the soil.
• વ્હીલ્સ: For transport and depth control.

Figure 3.2: HECHT 752 Tiller Overview
સંપૂર્ણ view of the HECHT 752 tiller, showcasing its compact design and robust construction. The red engine housing and silver handles are clearly visible, along with the tines and transport wheels.

4. સેટઅપ અને એસેમ્બલી

The HECHT 752 tiller requires some assembly before first use. Follow these general steps:

1. અનપેકીંગ: પેકેજિંગમાંથી બધા ઘટકો કાળજીપૂર્વક દૂર કરો. પરિવહન દરમિયાન કોઈપણ નુકસાન માટે તપાસો અને ખાતરી કરો કે બધા ભાગો પેકિંગ સૂચિ અનુસાર હાજર છે.
2. હેન્ડલ એસેમ્બલી: Attach the upper and lower handle sections to the main unit using the provided bolts and knobs. Ensure they are securely tightened.
3. વ્હીલ જોડાણ: Install the transport wheels. These wheels aid in moving the tiller to and from the work area and can be adjusted for tilling depth.
4. બળતણની તૈયારી: This is a 2-stroke engine. It requires a specific mixture of gasoline and 2-stroke engine oil. Refer to the engine specifications for the correct mixing ratio (e.g., 1:25 or 1:50). Mix the fuel in a separate, approved container before pouring it into the fuel tank. Do not use pure gasoline.
5. પ્રારંભિક તપાસો: Before starting, ensure all connections are secure, the spark plug is properly seated, and there are no fuel leaks.

Figure 4.1: Transport Wheels
વિગતવાર view of the tiller's transport wheels, which are essential for maneuvering the machine and can be adjusted to control the tilling depth.

5. ઓપરેટિંગ સૂચનાઓ

5.1. બળતણ

1. ખાતરી કરો કે એન્જિન બંધ અને ઠંડુ છે.
2. Move to a well-ventilated outdoor area.
3. Carefully open the fuel tank cap.
4. Pour the pre-mixed gasoline-oil fuel into the tank, avoiding overfilling.
5. ઇંધણ ટાંકીનું ઢાંકણ સુરક્ષિત રીતે બંધ કરો.

5.2. એન્જિન શરૂ કરી રહ્યા છીએ

1. Place the tiller on a flat, stable surface.
2. Ensure the tines are not in contact with the ground or any obstacles.
3. Set the choke lever to the 'START' or 'CHOKE' position (if applicable).
4. બળતણ દેખાય ત્યાં સુધી પ્રાઈમર બલ્બને ઘણી વખત દબાવો.
5. Hold the tiller firmly with one hand on the handle.
6. Pull the starting handle cord with a smooth, steady motion until the engine starts.
7. એકવાર એન્જિન શરૂ થઈ જાય, પછી ધીમે ધીમે ચોક લીવરને 'RUN' સ્થિતિમાં ખસેડો.

5.3. Tilling Operation

1. With the engine running, engage the tines (if there's a clutch lever).
2. Guide the tiller slowly into the soil. The 250 mm working width allows for efficient coverage.
3. Allow the tines to penetrate the soil. Do not force the machine.
4. Move the tiller forward in a controlled manner, overlapping passes slightly to ensure complete cultivation.
5. For deeper cultivation, make multiple passes, gradually increasinઊંડાઈ.

Figure 5.1: Tiller Blades (Tines)
A close-up showing the robust 16 blades (tines) of the HECHT 752 tiller, designed for effective soil aeration and cultivation.

5.4. એન્જિન બંધ કરવું

1. Release the accelerator or throttle lever.
2. Move the engine switch to the 'OFF' position.
3. Allow the engine to cool down before storage or maintenance.

6. જાળવણી

Regular maintenance ensures the longevity and optimal performance of your tiller.

• સફાઈ: After each use, clean the tiller, especially the tines and engine cooling fins, to remove soil, debris, and plant matter. Use a brush or cloth. Do not use high-pressure water directly on the engine.
• સ્પાર્ક પ્લગ: Periodically inspect the spark plug for wear or fouling. Clean or replace as necessary. The recommended electrode gap is 0.6 - 0.8 mm.
• એર ફિલ્ટર: Check and clean the air filter regularly. A clogged air filter can reduce engine performance.
• ઇંધણ સિસ્ટમ: For long-term storage, drain the fuel tank and run the engine until it stops to clear the carburetor of fuel. This prevents fuel degradation and gumming.
• બ્લેડ નિરીક્ષણ: Inspect the tines for wear, damage, or looseness. Replace worn blades to maintain effective tilling.
• લુબ્રિકેશન: Refer to the product diagram for any lubrication points and apply appropriate grease or oil as recommended.
• સામાન્ય નિરીક્ષણ: Regularly check all nuts, bolts, and fasteners for tightness. Tighten any loose components.

Figure 6.1: Engine View
એક ટોપ-ડાઉન view of the HECHT 752 tiller's 2-stroke engine, showing the fuel tank and air filter cover, which are key areas for routine maintenance.

7. મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your tiller.

8. ટેકનિકલ વિશિષ્ટતાઓ

9. વોરંટી અને સપોર્ટ

વોરંટી માહિતી અને ગ્રાહક સપોર્ટ માટે, કૃપા કરીને ખરીદી સમયે આપેલા દસ્તાવેજોનો સંદર્ભ લો અથવા તમારા રિટેલરનો સંપર્ક કરો. કોઈપણ વોરંટી દાવા માટે ખરીદીનો પુરાવો રાખો.

While spare parts information may not be readily available online, direct contact with the manufacturer or authorized service centers is recommended for parts and service inquiries.

For commercial service inquiries, particularly within France, please refer to the specific contact details provided by the seller or manufacturer.