WulaWindy Digital Mirror Surface Alarm Clock Instruction Manual

1. પરિચય

ખરીદી બદલ આભારasing the WulaWindy Digital Mirror Surface Alarm Clock. This device features a large LED display, dual USB charging ports, adjustable brightness, and a snooze function. Please read this manual carefully to ensure proper use and maintenance of your alarm clock.

2. સલામતી માહિતી

• ઉપકરણને અતિશય તાપમાન, સીધો સૂર્યપ્રકાશ અથવા ઉચ્ચ ભેજના સંપર્કમાં ન લાવો.
• ઉપકરણને મજબૂત અસરમાં મૂકવા અથવા આધીન કરવાનું ટાળો.
• ફક્ત ઉલ્લેખિત પાવર એડેપ્ટરનો ઉપયોગ કરો.
• બાળકોની પહોંચથી દૂર રાખો.
• ઉપકરણને જાતે ડિસએસેમ્બલ કરવાનો કે રિપેર કરવાનો પ્રયાસ કરશો નહીં. લાયક સેવા કર્મચારીઓનો સંપર્ક કરો.

3. પેકેજ સામગ્રી

• WulaWindy Digital Mirror Surface Alarm Clock
• પાવર એડેપ્ટર
• વપરાશકર્તા માર્ગદર્શિકા

4. ઉત્પાદન ઓવરview

Familiarize yourself with the alarm clock's components and controls.

છબી: ઓવરview of the alarm clock, highlighting the SNOOZE, MODE, UP, DOWN buttons on top, the dimmer control on the side, and the input port, USB ports, and battery compartment on the back. Dimensions are also indicated.

• ફ્રન્ટ ડિસ્પ્લે: Large LED time display with mirror surface.
• Top Buttons: SNOOZE, MODE, UP, DOWN.
• બાજુ: Dimmer Control knob.
• પાછળ: Power Input port, Dual USB charging ports, Battery Compartment.

5. સેટઅપ

5.1 પાવર કનેક્શન

Connect the provided power adapter to the 'Input port' on the back of the alarm clock and plug it into a standard wall outlet. The display will light up.

5.2 Battery Installation (Optional Backup)

For time memory backup during power outages, install 3 AAA batteries (not included) into the 'Battery Jar' compartment on the back of the clock. The clock will not operate solely on battery power; batteries are for backup only.

6. ઓપરેટિંગ સૂચનાઓ

6.1 સમય નક્કી કરવો

1. Press and hold the 'MODE' button until the hour digits begin to flash.
2. Use the 'UP' and 'DOWN' buttons to adjust the hour.
3. Press 'MODE' again to switch to minute adjustment.
4. Use the 'UP' and 'DOWN' buttons to adjust the minutes.
5. Press 'MODE' once more to confirm and exit time setting.

6.2 એલાર્મ સેટ કરવું

1. Press the 'MODE' button once to enter alarm setting mode. The 'AL' indicator will appear.
2. Press and hold 'MODE' until the alarm hour digits flash.
3. Use the 'UP' and 'DOWN' buttons to set the desired alarm hour.
4. Press 'MODE' again to switch to alarm minute adjustment.
5. Use the 'UP' and 'DOWN' buttons to set the desired alarm minutes.
6. Press 'MODE' to confirm. The 'AL' indicator will remain lit, indicating the alarm is active.
7. To deactivate the alarm, press the 'MODE' button until the 'AL' indicator disappears.

Image: The WulaWindy Digital Mirror Surface Alarm Clock showing the time, demonstrating its clear display and mirror functionality.

6.3 સ્નૂઝ ફંક્શન

When the alarm sounds, press the 'SNOOZE' button to temporarily silence the alarm. The alarm will sound again after a set snooze interval (typically 5-10 minutes). To turn off the alarm completely, press any other button.

૩.૧ ડિસ્પ્લે બ્રાઇટનેસ (ડિમર)

Rotate the 'DIMMER CONTROL' knob located on the side of the clock to adjust the display brightness. This allows you to customize the light intensity to your preference, preventing it from being too bright at night.

Image: Visual representation of the dimmer function, illustrating the adjustable brightness levels from 0 to 100 degrees.

૬.૬ ડ્યુઅલ યુએસબી ચાર્જિંગ પોર્ટ

The alarm clock features two USB charging ports on the back. You can use these ports to charge your mobile phones or other smart devices simultaneously. Note: USB charging cables are not included.

Image: The alarm clock with two smartphones plugged into its dual USB charging ports, demonstrating its charging capability.

7. જાળવણી

• Clean the mirror surface and body with a soft, dry cloth.
• ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• સફાઈ કરતા પહેલા ઉપકરણ અનપ્લગ થયેલ છે તેની ખાતરી કરો.

8. મુશ્કેલીનિવારણ

• Clock not displaying: Ensure the power adapter is securely connected to both the clock and a working power outlet. Check if backup batteries are installed correctly.
• એલાર્મ વાગતો નથી: Verify that the alarm is set and the 'AL' indicator is visible on the display. Ensure the volume is not set to minimum (if applicable).
• USB ports not charging: Confirm the clock is powered on. Check if the USB cables are properly connected to both the device and the clock. Ensure the device being charged is compatible.
• Display too bright/dim: Adjust the 'DIMMER CONTROL' knob on the side of the clock.

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

For warranty information or technical support, please refer to the product packaging or contact WulaWindy customer service directly. Keep your purchase receipt for proof of purchase.