1. ઉત્પાદન ઓવરview
The PHILCO 51811 is a high-quality, adjustable recessed base designed for MR16 LED bulbs. Constructed from durable aluminum with a clean white finish, this base is suitable for installation in various ceiling types, including false ceilings, plasterboard, or concrete slabs (with appropriate housing). It includes an MR16 socket compatible with GU5.3 or Bi-pin type bulbs and a segment of electrical cable. Please note that the MR16 LED bulb itself is not included with this product.

Figure 1: The PHILCO 51811 MR16 LED recessed adjustable base. This image shows the circular, white aluminum base with its inner adjustable ring, designed to securely hold an MR16 LED bulb.
2. સલામતી માહિતી
ઇન્સ્ટોલેશન અને ઉપયોગ કરતા પહેલા કૃપા કરીને બધી સૂચનાઓ કાળજીપૂર્વક વાંચો. આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ઇલેક્ટ્રિક શોક, આગ અથવા અન્ય જોખમોમાં પરિણમી શકે છે.
- Always disconnect power at the circuit breaker before installing or servicing the fixture.
- Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring.
- વોલ્યુમની ખાતરી કરોtage supply is compatible with the MR16 bulb being used.
- મહત્તમ વોટ કરતાં વધી જશો નહીંtage rating of the MR16 bulb.
- Avoid touching the bulb directly after prolonged use, as it may be hot.
- આ ઉત્પાદન માત્ર ઇન્ડોર ઉપયોગ માટે બનાવાયેલ છે.
3. પેકેજ સામગ્રી
ઇન્સ્ટોલેશન શરૂ કરતા પહેલા ખાતરી કરો કે બધા ઘટકો હાજર છે અને તેમને કોઈ નુકસાન થયું નથી:
- 1x PHILCO 51811 MR16 Recessed Adjustable Base (White, Aluminum)
- 1x MR16 Socket (GU5.3 / Bi-pin compatible)
- 1x Segment of Electrical Cable
- નોંધ: MR16 LED bulb is NOT included.
4. સેટઅપ અને ઇન્સ્ટોલેશન
This recessed base is designed for installation in ceilings such as plasterboard, false ceilings, or concrete slabs (requiring a compatible recessed housing or 'bote').
- ઇન્સ્ટોલેશન વિસ્તાર તૈયાર કરો: Ensure the power supply to the installation area is turned off at the main circuit breaker. Create a circular opening in the ceiling with an appropriate diameter to accommodate the base and its housing (if used). The external diameter of the base is 9 cm.
- વાયરિંગ કનેક્ટ કરો: Connect the electrical cable segment provided with the MR16 socket to your main electrical wiring. Ensure all connections are secure and properly insulated according to local electrical codes.
- Insert MR16 Bulb: Carefully insert your MR16 LED bulb into the GU5.3/Bi-pin socket.
- આધાર સ્થાપિત કરો: Place the assembled base and bulb into the prepared ceiling opening. Secure the base using the integrated clips or springs (if present, typical for recessed fixtures) or by fastening it to the recessed housing. The base is adjustable, allowing you to direct the light as needed after installation.
- પાવર પુન Restસ્થાપિત કરો: Once the base is securely installed and all connections are verified, restore power at the circuit breaker.
મહત્વપૂર્ણ: If you are unsure about any step of the installation process, consult a qualified electrician.
5. ઓપરેટિંગ સૂચનાઓ
Once installed and powered, the PHILCO 51811 recessed base operates in conjunction with the MR16 LED bulb. The light can be turned on or off via the wall switch connected to the circuit. The inner ring of the base allows for directional adjustment of the light beam.
- પ્રકાશ દિશાને સમાયોજિત કરવી: Gently pivot the inner ring of the base to direct the MR16 bulb to your desired angle. Do not apply excessive force.
- બલ્બ રિપ્લેસમેન્ટ: Ensure power is off before attempting to replace the MR16 bulb. Allow the bulb to cool completely before handling.
6. જાળવણી
The PHILCO 51811 recessed base requires minimal maintenance.
- સફાઈ: Disconnect power before cleaning. Wipe the exterior of the base with a soft, dry, or slightly damp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સનો ઉપયોગ કરશો નહીં, કારણ કે આ ફિનિશને નુકસાન પહોંચાડી શકે છે.
- નિરીક્ષણ: Periodically inspect the base and wiring for any signs of wear or damage. If any damage is observed, disconnect power and consult a qualified electrician for repair or replacement.
7. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| પ્રકાશ ચાલુ થતો નથી. |
|
|
| આછું ફ્લિકર્સ. |
|
|
8. સ્પષ્ટીકરણો
- મોડલ: PHILCO 51811
- ઉત્પાદન પ્રકાર: Recessed Adjustable Base for MR16 LED
- સામગ્રી: એલ્યુમિનિયમ
- રંગ: સફેદ
- સોકેટ પ્રકાર: MR16 (GU5.3 / Bi-pin)
- આંતરિક વ્યાસ: 5.8 સે.મી
- બાહ્ય વ્યાસ: 9 સે.મી
- ઊંચાઈ: 3 સે.મી
- સુસંગતતા: Suitable for plasterboard, false ceilings, or concrete slabs (with appropriate housing).
9. વોરંટી અને સપોર્ટ
Specific warranty information for the PHILCO 51811 is not provided in this manual. Please refer to your purchase documentation or contact the retailer for details regarding warranty coverage.
For technical support or inquiries, please contact PHILCO customer service or your authorized dealer.





