1. પરિચય
The Laserliner DigiLevel Laser G80 is a digital electronic spirit level designed for precise horizontal and vertical alignment, as well as accurate angle transfer. This device features an integrated green laser line for extending the measuring surface, a magnetic base for hands-free operation on metallic structures, and acoustic guidance for convenient use. Its 80 cm length makes it suitable for a wide range of applications in various trades.
2. સલામતી સૂચનાઓ
Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in injury or damage to the device.
- લેસર રેડિયેશન: This device uses a Class 2 laser. Do not look directly into the laser beam or direct it towards other people. Eye protection is recommended when working with lasers.
- બેટરી: Ensure correct battery polarity when inserting. Do not mix old and new batteries or different types of batteries. Remove batteries if the device will not be used for an extended period.
- જાળવણી: ઉપકરણ ખોલવાનો કે તેમાં ફેરફાર કરવાનો પ્રયાસ કરશો નહીં. સમારકામ ફક્ત અધિકૃત કર્મચારીઓ દ્વારા જ થવું જોઈએ.
- પર્યાવરણ: Use the device within the specified operating temperature range (0°C to 40°C). Avoid exposure to extreme temperatures, moisture, or strong vibrations.
3. ઉત્પાદન ઓવરview
3.1 ઘટકો
The DigiLevel Laser G80 consists of the following main components:
- ડિજિટલ ડિસ્પ્લે
- Control Buttons (UNIT, REF, CAL, HOLD, Power/Backlight)
- Horizontal and Vertical Vials
- Green Laser Output
- મેગ્નેટિક બેઝ
- બેટરી કમ્પાર્ટમેન્ટ
આકૃતિ 1: ઓવરview of the Laserliner DigiLevel Laser G80.
Figure 2: The DigiLevel Laser G80, its protective carrying bag, and AAA batteries.
૬.૨ ડિસ્પ્લે અને બટનો
The digital display provides clear readings and indicators. The buttons allow for various functions and settings.
Figure 3: Close-up of the backlit digital display, showing angle measurement and battery status.
Figure 4: The automatic 180° flip display feature for convenient overhead measurements.
- UNIT બટન: Press to cycle through measurement units (degrees, %, mm/m).
- REF Button: Press to set the current angle as a reference (0°) for relative measurements.
- CAL બટન: Press and hold to enter calibration mode for maintaining accuracy.
- હોલ્ડ બટન: Press to freeze the current measurement on the display.
- પાવર બટન (⑂): Press to turn the device on/off. Short press to activate/deactivate backlight.
4. સેટઅપ
4.1 બેટરી ઇન્સ્ટોલેશન
- ઉપકરણ પર બેટરી કમ્પાર્ટમેન્ટ કવર શોધો.
- કવર ખોલો.
- Insert two (2) 1.5V LR03 (AAA) batteries, ensuring correct polarity (+/-).
- બેટરી કમ્પાર્ટમેન્ટ કવર સુરક્ષિત રીતે બંધ કરો.
5. ઓપરેટિંગ સૂચનાઓ
5.1 પાવર ચાલુ/બંધ
Press the Power button (⑂) to turn the device on. Press and hold the Power button to turn it off.
૫.૪ મૂળભૂત માપન
Place the DigiLevel Laser G80 on the surface to be measured. The digital display will show the angle of inclination. The display automatically rotates 180° for overhead measurements.
5.3 એકમ પસંદગી
દબાવો UNIT button to switch between different measurement units: degrees (°), percentage (%), and mm/m.
5.4 Reference Function (REF)
To measure relative angles, place the device on a surface and press the સંદર્ભ button. The display will show 0.0°, and subsequent measurements will be relative to this set reference angle. Press સંદર્ભ again to return to absolute measurement.
5.5 Calibration (CAL)
For sustained accuracy, periodic calibration is recommended. Refer to the full user manual for detailed calibration steps. Generally, this involves placing the device on a level surface, initiating calibration, rotating 180°, and confirming.
૫.૪ લેસર કાર્ય
The integrated green laser line extends the measuring surface, allowing for precise alignment over longer distances. Activate the laser by pressing the dedicated laser button (often integrated with the power button or a separate button). The laser module is located at one end of the level.
Figure 5: The green laser module projecting a line for extended measurement.
Figure 6: The DigiLevel Laser G80 in use, projecting a green laser line onto a wall for alignment.
5.7 Acoustic Guidance
The device provides acoustic signals to assist with alignment at specific angles (0°, 45°, 90°). Three different tones indicate these angles, allowing for hands-free alignment without constantly watching the display.
Figure 7: Illustration of 360° angle measurement and acoustic signals at key angles (0°, 45°, 90°, 135°, 180°).
5.8 કાર્ય રાખો
દબાવો પકડી રાખો button to freeze the current measurement on the display. This is useful for taking readings in difficult-to-view positions. Press પકડી રાખો again to release the measurement.
Figure 8: The 'Hold Angle' function, allowing the current measurement to be frozen on the display.
5.9 મેગ્નેટિક બેઝ
The integrated magnetic base allows the device to be securely attached to metallic surfaces, enabling hands-free operation for increased convenience and precision.
Figure 9: The magnetic base provides secure attachment to metal surfaces.
6. અરજીઓ
The Laserliner DigiLevel Laser G80 is suitable for a variety of professional and DIY applications, including:
- Carpentry and Joinery: Precise alignment of wooden structures, frames, and furniture.
- ડ્રાયવૉલ ઇન્સ્ટોલેશન: Ensuring level and plumb surfaces for wall and ceiling panels.
- છત: Measuring and transferring roof pitches and angles.
- ચિત્રકામ: Establishing level lines for decorative elements or wall preparation.
- સામાન્ય બાંધકામ: Any task requiring accurate horizontal, vertical, or angle measurements.
Figure 10: Using the laser line to align multiple picture frames on a wall.
Figure 11: The spirit level used for vertical alignment, ensuring plumb surfaces.
Figure 12: Measuring and aligning on an angled ceiling or sloped surface.
Figure 13: Acoustic guidance assists in leveling shelves, indicated by sound waves.
Figure 14: Acoustic feedback helps in precisely aligning cabinets during installation.
7. જાળવણી
- સફાઈ: ઉપકરણને સોફ્ટ સાથે સાફ કરો, ડીamp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
- સંગ્રહ: Store the device in its carrying bag in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods.
- નિરીક્ષણ: નુકસાનના કોઈપણ ચિહ્નો માટે ઉપકરણને નિયમિતપણે તપાસો.
8. મુશ્કેલીનિવારણ
- ઉપકરણ ચાલુ થતું નથી: બેટરી ઇન્સ્ટોલેશન તપાસો અને ખાતરી કરો કે બેટરી ખાલી નથી થઈ ગઈ. જો જરૂરી હોય તો બદલો.
- અચોક્કસ વાંચન: Perform a calibration as described in the full user manual. Ensure the device is placed on a stable surface.
- Laser not visible: Check battery level. Ensure the laser output is not obstructed.
9. સ્પષ્ટીકરણો
| મોડલ નંબર | 081.257A |
| લંબાઈ | 80 સે.મી |
| લેસર પ્રકાર | Green Line Laser, Class 2, <1 mW |
| લેસર તરંગલંબાઇ | 515 એનએમ |
| Electronic Measurement Accuracy | ± 0.1° at 0°…1° and 89°…90°, ± 0.2° at 1°…89° |
| Vial Accuracy | ± 0.5 મીમી/મી |
| પ્રદર્શન ચોકસાઈ | 1 દશાંશ સ્થાન |
| પાવર સપ્લાય | 2 x 1.5V LR03 (AAA) batteries |
| ઓપરેટિંગ તાપમાન | 0°C થી 40°C |
| સામગ્રી | એલ્યુમિનિયમ |
| વજન | 966 ગ્રામ |
10. પેકેજ સામગ્રી
The Laserliner DigiLevel Laser G80 package includes:
- DigiLevel Laser G80 Digital Electronic Spirit Level
- 2 x 1.5V LR03 (AAA) Batteries
- વહન બેગ
11. વોરંટી અને સપોર્ટ
Warranty information for the Laserliner DigiLevel Laser G80 is typically provided with the product at the time of purchase or can be obtained directly from the manufacturer, Laserliner. For technical support, please refer to the contact information provided in your product packaging or visit the official Laserliner webસાઇટ
