1. પરિચય
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Alpine S-A60M Mono Car Audio Amplifier. The S-A60M is a Class-D amplifier designed to deliver reliable power for your car audio subwoofer system. For optimal performance and safety, please read this manual thoroughly before installation and use.
Image 1.1: Alpine S-A60M Mono Car Audio Amplifier with optional RUX-KNOB.2 remote bass control knob and wiring accessories.
2. સલામતી માહિતી
Always observe the following safety precautions to prevent injury or damage to the amplifier or vehicle:
- Disconnect the vehicle's negative battery terminal before starting any installation.
- Ensure proper grounding to the vehicle chassis.
- Use appropriate gauge wiring for power and ground connections as specified in the installation section.
- Protect all wiring from sharp edges and pinch points.
- માઉન્ટ કરશો નહીં amplifier in locations exposed to direct sunlight, excessive heat, moisture, or dust.
- સુરક્ષિત રીતે માઉન્ટ કરો amplifier to prevent it from coming loose during sudden stops or impacts.
- નું સંચાલન કરવાનું ટાળો amplifier at excessively high volume levels for prolonged periods, which can damage hearing or speakers.
- જો તમને ઇન્સ્ટોલેશન પ્રક્રિયાના કોઈપણ ભાગ વિશે ખાતરી ન હોય, તો લાયક વ્યાવસાયિકનો સંપર્ક કરો.
3. સેટઅપ અને ઇન્સ્ટોલેશન
તમારા ઉપકરણના પ્રદર્શન અને લાંબા આયુષ્ય માટે યોગ્ય ઇન્સ્ટોલેશન મહત્વપૂર્ણ છે ampલિફાયર. આ પગલાં કાળજીપૂર્વક અનુસરો.
3.1 પાવર સપ્લાય વાયરિંગ
Refer to the diagram below for correct power supply connections. Always use the specified wire gauges and ensure all connections are secure.
Image 3.1: Power Supply Wiring Diagram. This diagram illustrates the correct method for connecting the amplifier to the vehicle's power system, including the battery, fuse, and ground connections. Ensure the fuse capacity matches the amplifier's requirements.
મહત્વપૂર્ણ: The total fuse capacity of the amplifier must be installed and the specified wire length. For detailed information, refer to the "Power Supply" section in the owner's manual. Always connect the power wire directly to the positive battery terminal and the ground wire to a clean, unpainted metal surface on the vehicle chassis.
- Battery (BATT): Connect to the positive (+) terminal of the vehicle battery via an appropriate fuse.
- રિમોટ (REM): Connect to the remote turn-on output of your head unit.
- ગ્રાઉન્ડ (GND): Connect to a clean, unpainted metal part of the vehicle chassis.
- Speaker Output (SPK OUT): Connect to your subwoofer(s).
છબી 3.2: Amplifier Power and Speaker Output Terminals. This image displays the terminals for power input (BATT, REM, GND) and speaker output (SPK OUT) on the Alpine S-A60M amplifier, along with the integrated fuses.
૩.૩ ઓડિયો ઇનપુટ કનેક્શન્સ
The S-A60M supports both low-level (RCA) and high-level (speaker wire) inputs.
- લો-લેવલ ઇનપુટ (RCA): Connect RCA cables from your head unit's subwoofer or full-range pre-outs to the amplifier's INPUT (L/R) terminals.
- ઉચ્ચ-સ્તરની ઇનપુટ: If your head unit does not have RCA outputs, connect speaker wires from your head unit's speaker outputs directly to the amplifier's high-level input terminals (if available, or use a line output converter).
છબી 3.3: Amplifier Input and Control Panel. This image highlights the various input and control settings on the Alpine S-A60M, including the input level switch, gain control, low-pass filter, bass equalizer, and the port for the optional remote bass control.
4. સંચાલન Ampજીવંત
Once installed, adjust the amplifier settings for optimal sound performance.
4.1 Input Level Adjustment
- સેટ કરો ઇનપુટ લેવલ switch to "LO" for low-level (RCA) inputs or "HI" for high-level inputs.
- એડજસ્ટ કરો ગેઇન control to match the output of your head unit. Start with the gain at minimum, play a familiar track, and slowly increase the gain until distortion is heard, then back off slightly.
4.2 LP Filter (Low-Pass Filter)
The LP Filter allows only frequencies below the set point to pass through to the subwoofer. This is essential for proper subwoofer integration.
- એડજસ્ટ કરો એલપી ફિલ્ટર knob to set the desired crossover frequency (e.g., 80Hz-120Hz is common for subwoofers).
4.3 Bass EQ
The Bass EQ provides a boost to specific bass frequencies.
- એડજસ્ટ કરો BASS EQ knob to increase or decrease bass output. Use sparingly to avoid distortion and speaker damage.
4.4 Remote Bass Control (Optional RUX-KNOB.2)
If you have the optional Alpine RUX-KNOB.2 remote bass control, connect it to the REMOTE BASS CONTROL પર પોર્ટ amplifier. This allows for convenient, on-the-fly adjustment of subwoofer output from the driver's seat.
5. જાળવણી
નિયમિત જાળવણી તમારા શરીરની આયુષ્ય અને શ્રેષ્ઠ કામગીરી સુનિશ્ચિત કરે છે ampજીવંત
- સફાઈ: સમયાંતરે સાફ કરો ampલાઇફાયર્સના બાહ્ય ભાગને નરમ, સૂકા કપડાથી સાફ કરો. કઠોર રસાયણો અથવા ઘર્ષક ક્લીનર્સનો ઉપયોગ કરવાનું ટાળો.
- જોડાણો: Annually check all power, ground, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- વેન્ટિલેશન: ખાતરી કરો ampયોગ્ય ગરમીનું વિસર્જન કરવા માટે લિફાયરના કૂલિંગ ફિન્સ અવરોધોથી મુક્ત છે.
6. મુશ્કેલીનિવારણ
જો તમને તમારી સાથે સમસ્યાઓનો અનુભવ થાય છે amplifier, consult the following table before seeking professional assistance.
| લક્ષણ | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| No power/No sound | Blown fuse, loose power/ground connection, remote wire not connected, ampપ્રોટેક્શન મોડમાં લિફાયર. | Check fuses (on amplifier and in power line), verify all power and ground connections, ensure remote wire is connected to head unit's remote output, check for overheating or short circuits. |
| વિકૃત અવાજ | Gain set too high, improper input level switch setting, damaged speaker, poor signal source. | Reduce gain, ensure INPUT LEVEL switch matches input type (LO/HI), check speaker wiring and condition, test with a different audio source. |
| No bass output | LP Filter set too high/low, Bass EQ set too low, subwoofer wiring issue. | Adjust LP Filter to appropriate frequency, increase Bass EQ if desired (with caution), verify subwoofer connections and impedance. |
| Ampલિફાયર વધારે ગરમ થાય છે | Insufficient ventilation, improper impedance load, gain set too high. | આસપાસ પૂરતો હવા પ્રવાહ સુનિશ્ચિત કરો amplifier, verify speaker impedance matches amplifier's capabilities, reduce gain setting. |
7. સ્પષ્ટીકરણો
Detailed technical specifications for the Alpine S-A60M ampજીવંત
- મોડલ નંબર: S-A60M
- CTA-2006-B Power Rating:
- 330W RMS x 1 (4ohm, 14.4V, 1% THD+N)
- 600W RMS x 1 (2ohm, 14.4V, 1% THD+N)
- સિગ્નલ-ટુ-નોઈઝ રેશિયો (S/N): >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm)
- કુલ હાર્મોનિક વિકૃતિ + અવાજ (THD+N): 0.03% (ref 1W into 4 ohm)
- આવર્તન પ્રતિસાદ: 10Hz-400Hz (+/-3 dB)
- Dampપરિબળ: >1000
- ભાગtage: 14.4 વોલ્ટ (DC)
- મહત્તમ પુરવઠો ભાગtage: 14.4 વોલ્ટ (DC)
- ન્યૂનતમ પુરવઠો વોલ્યુમtage: 14.4 વોલ્ટ (DC)
- માઉન્ટ કરવાનો પ્રકાર: સપાટી માઉન્ટ
- પેકેજ પરિમાણો: 10.2 x 9.7 x 3.8 ઇંચ
- વજન: 6.8 પાઉન્ડ
- Remote Bass Knob Compatible: Yes (requires RUX-KNOB.2, sold separately)
8. વોરંટી અને સપોર્ટ
Alpine products are designed and manufactured to the highest quality standards. For specific warranty information regarding your S-A60M amplifier, please refer to the warranty card included with your product or visit the official Alpine webસાઇટ
For technical support, service inquiries, or to locate an authorized Alpine dealer, please visit the official Alpine webસાઇટ પર જાઓ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.
આલ્પાઇન ઇલેક્ટ્રોનિક્સ ઓફ અમેરિકા, Inc.
www.alpine-usa.com
