AtlasIED E408-250 પ્લેટ માઉન્ટેડ 250W એટેન્યુએટર યુઝર મેન્યુઅલ

1. ઉત્પાદન ઓવરview

The AtlasIED E408-250 is a plate-mounted attenuator specifically designed for precise level control in masking and sound reinforcement systems. It features a 10-position, non-shorting rotary switch that allows for fine-tuning of audio levels. Each step of the rotary switch provides an attenuation rate of 1.5 dB, offering granular control over the sound output.

આકૃતિ 1: ફ્રન્ટ view of the AtlasIED E408-250 attenuator, showing the rotary knob and numbered dial on a brushed metal plate.

2. સેટઅપ અને ઇન્સ્ટોલેશન

Proper installation is crucial for the optimal performance of the E408-250 attenuator. This device is designed for plate mounting, typically into a standard electrical box or similar enclosure.

2.1 માઉન્ટ કરવાનું

• Ensure the mounting surface is flat and secure.
• Align the attenuator plate with the mounting holes of the electrical box or bracket.
• Secure the plate using appropriate screws (not included). Do not overtighten.

2.2 વાયરિંગ કનેક્શન્સ

The E408-250 attenuator requires connection to your sound system's speaker lines. Refer to the wiring diagram below and on the unit itself for correct polarity and connection points. It is recommended to consult a qualified audio technician for installation if you are unfamiliar with audio wiring.

આકૃતિ 2: પાછળ view of the attenuator, illustrating the transformer and the green terminal block where speaker wires are connected.

The attenuator typically connects in series with the speaker line. Ensure power to the amplifier is off before making any connections to prevent damage to the equipment or injury.

3. ઓપરેટિંગ સૂચનાઓ

The AtlasIED E408-250 features a simple rotary knob for adjusting the audio level. The knob has 10 distinct positions, labeled from 0 to 10, providing precise control over the attenuation.

• Adjusting Level: Rotate the knob clockwise to increase the sound level (less attenuation) and counter-clockwise to decrease the sound level (more attenuation).
• Attenuation Rate: Each step of the rotary switch provides an attenuation of 1.5 dB. This allows for fine adjustments to achieve the desired sound level in your environment.
• Non-Shorting Design: The switch is designed to be non-shorting, meaning it will not create a short circuit when transitioning between positions.
• No Stop: The rotary switch does not have a physical stop at position 0 or 10, allowing for continuous rotation. However, the attenuation range is defined by the 0-10 scale.

આકૃતિ 3: કોણીય view of the attenuator, highlighting the rotary knob and the numbered faceplate for level adjustment.

4. જાળવણી

The AtlasIED E408-250 attenuator is designed for long-term, reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:

• સફાઈ: Use a soft, dry cloth to wipe the surface of the attenuator plate. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
• નિરીક્ષણ: Periodically inspect the wiring connections to ensure they are secure and free from corrosion.
• પર્યાવરણ: Ensure the attenuator is installed in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.

5. મુશ્કેલીનિવારણ

If you experience issues with your AtlasIED E408-250 attenuator, consider the following common troubleshooting steps:

• કોઈ અવાજ અથવા ઓછો અવાજ:
  • Check all wiring connections to ensure they are secure and correctly terminated.
  • Verify that the attenuator knob is not set to '0' (maximum attenuation).
  • ખાતરી કરો amplifier connected to the attenuator is powered on and functioning correctly.
  • Confirm that the speakers are properly connected and operational.
• તૂટક તૂટક અવાજ:
  • Inspect wiring for loose connections or damaged insulation.
  • Ensure the attenuator knob is clean and free of debris that might interfere with its contact points.
• વિકૃત અવાજ:
  • Verify that the attenuator is rated for the power output of your amplifier (E408-250 is 250W). Overpowering can cause distortion or damage.
  • Check other components in the audio chain (amplifier, speakers) for issues.

If the problem persists after attempting these steps, contact Atlas Sound customer support or a qualified audio technician.

6. સ્પષ્ટીકરણો

7. વોરંટી અને સપોર્ટ

For specific warranty information regarding your AtlasIED E408-250 attenuator, please refer to the documentation provided with your purchase or visit the official Atlas Sound webસાઇટ. વોરંટીના નિયમો અને શરતો અલગ અલગ હોઈ શકે છે.

For technical support, product inquiries, or service, please contact Atlas Sound directly:

• ઉત્પાદક: એટલાસ સાઉન્ડ
• Webસાઇટ: www.atlassound.com (Note: This is a general example link, please verify the actual support URL.)
• સંપર્ક માહિતી: ઉત્પાદકનો સંદર્ભ લો website for the most current contact details, including phone numbers and email addresses for customer service.