LE Solar Outdoor Motion Sensor Light WL4000 Instruction Manual

1. પરિચય

This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

છબી 1.1: ઓવરview of the LE Solar Outdoor Motion Sensor Light WL4000.

2. ઉત્પાદન સુવિધાઓ

• પહોળો પ્રકાશ કોણ: Features 3 adjustable heads providing 270° wide lighting coverage.
• ઉચ્ચ તેજ: Delivers 1000 lumens of 6500K daylight illumination.
• કાર્યક્ષમ સૌર ચાર્જિંગ: Converts sunlight into electricity, charging during the day for night operation.
• પીર મોશન સેન્સર: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
• સ્વચાલિત કામગીરી: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
• ટકાઉ અને હવામાન પ્રતિરોધક: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
• સરળ સ્થાપન: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.

Image 2.1: Product dimensions and adjustable light heads.

Image 2.2: The 270-degree wide lighting angle.

Image 2.3: Motion sensor detection range and angle.

3. પેકેજ સામગ્રી

• LE Solar Outdoor Motion Sensor Light (WL4000)
• Mounting Hardware (screws and wall anchors)
• વપરાશકર્તા માર્ગદર્શિકા

4. સેટઅપ અને ઇન્સ્ટોલેશન

Follow these steps for proper installation of your solar light:

1. સ્થાન પસંદ કરો: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. એલ ઇન્સ્ટોલ કરોamp ધારક: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
3. પ્રકાશને સક્રિય કરો: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
4. લાઈટ લટકાવી રાખો: Carefully hang the solar light unit onto the installed lamp ધારક
5. લાઇટ હેડ્સ એડજસ્ટ કરો: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.

Image 4.1: Step-by-step installation process.

Image 4.2: Fixing the lamp સ્ક્રૂ સાથે ધારક.

Image 4.3: Activating the light using the mode switch.

Image 4.4: Hanging the light onto the lamp ધારક

5. ઓપરેટિંગ સૂચનાઓ

The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.

• દિવસની કામગીરી: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• રાત્રિના સમયે કામગીરી: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
• સ્વચાલિત શટ-:ફ: The light will automatically turn off approximately 20 seconds after no further motion is detected.

Image 5.1: Solar charging and motion-activated lighting cycle.

6. જાળવણી

To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:

• સોલર પેનલ સાફ કરો: સોલાર પેનલને નિયમિતપણે સોફ્ટ, ડી વડે સાફ કરો.amp cloth to remove dust, dirt, and debris. A clean panel ensures efficient sunlight absorption and charging.
• અવરોધો સાફ કરો: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
• નુકસાન માટે તપાસ કરો: Periodically check the light for any physical damage, loose connections, or signs of wear.
• હવામાન પ્રતિકાર: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image 6.1: IP65 waterproof, heat, and frost resistance features.

7. મુશ્કેલીનિવારણ

If your solar light is not functioning as expected, consider the following common issues and solutions:

• Light does not turn on at night:
  • ખાતરી કરો કે પાવર સ્વીચ ચાલુ સ્થિતિમાં છે.
  • Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
  • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
  • Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
• Light stays on for a short period or is dim:
  • Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
  • The battery may not be fully charged. Ensure optimal sun exposure.
• Motion sensor is not detecting:
  • ખાતરી કરો કે સેન્સર અવરોધિત નથી.
  • Verify the light is installed within the recommended height range (1.5-3.5 meters).
  • Test the sensor by walking within its detection range.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.