ઇન્ટેક્સ સિમ્પલ સ્પા 28481E 4-વ્યક્તિ ઇન્ફ્લેટેબલ હોટ ટબ સૂચના માર્ગદર્શિકા

મહત્વપૂર્ણ સલામતી માહિતી

ચેતવણી: આ ઉત્પાદનમાં કેન્સર અને જન્મજાત ખામી અથવા અન્ય પ્રજનન નુકસાન પહોંચાડવા માટે કેલિફોર્નિયા રાજ્યમાં જાણીતા રસાયણો છે. વધુ માહિતી માટે, પર જાઓ www.P65Warnings.ca.gov.

ચેતવણી: ગૂંગળામણનો ખતરો - નાના ભાગો. 3 વર્ષથી ઓછી ઉંમરના બાળકો માટે નહીં.

મહત્વપૂર્ણ: Due to California energy restrictions, this item is not available for sale or shipping to California.

Always supervise children when they are near the hot tub. Ensure the hot tub is placed on a flat, stable surface capable of supporting its weight when filled. Do not use extension cords with this product. Always follow local electrical codes and safety guidelines.

પેકેજ સામગ્રી

સેટઅપ શરૂ કરતા પહેલા ખાતરી કરો કે બધા ઘટકો હાજર છે:

• ઇન્ફ્લેટેબલ સ્પા ટબ
• Control Unit with Built-in Heater and Inflation System
• ઇન્સ્યુલેટેડ કવર
• Insulated Ground Cloth
• 2 Replaceable Filter Cartridges
• Chemical Dispenser (tablets not included)
• કેરી બેગ

સેટઅપ

૧. સ્થળ પસંદગી અને તૈયારી

Choose a flat, level surface free of sharp objects. The area must be able to support the weight of the filled spa (approximately 210 gallons of water plus occupants). Place the insulated ground cloth on the chosen site to provide bottom protection and minimize heat loss.

Image: The Intex Simple Spa 28481E set up outdoors, showcasing its round shape and external control unit.

2. ફુગાવો

Unfold the spa tub and connect the inflation hose from the control unit to the spa's inflation valve. Use the control unit's inflation system to inflate the spa until it is firm but not over-inflated. Ensure the sturdy horizontal beam construction is properly aligned during inflation.

છબી: ક્લોઝ-અપ view of the spa's durable exterior mesh hull, designed for extra protection.

3. Control Unit Connection

Connect the control unit to the spa tub according to the instructions provided in the separate control unit manual. Ensure all connections are secure. Plug the control unit directly into a grounded electrical outlet. Do not use extension cords.

4. પાણી ભરવું

Fill the spa with water using a garden hose. Fill to the maximum water level indicated on the interior of the spa. The water capacity is approximately 210 gallons.

ઓપરેશન

1. નિયંત્રણ પેનલ ઓવરview

The spa features an adjustable tilt touch button control panel for easy operation. This unit allows you to manage heating, filtration, and bubble jet functions.

છબી: વિગતવાર view of the easy-to-use control panel, showing buttons for temperature, bubbles, and power.

2. Heating the Water

Press the heater button on the control panel to activate the adjustable heating system. Set your desired water temperature using the up and down arrows. The spa can heat water up to 104°F (40°C). Heating time will vary based on ambient temperature and initial water temperature.

3. Activating Bubble Jets

Press the bubble jet button on the control panel to activate the 100 powerful bubble jets. These jets provide a refreshing massage experience. Press the button again to turn them off.

Image: A close-up shot of the spa's interior, showing the invigorating bubble jets creating a relaxing water massage.

જાળવણી

1. ફિલ્ટર કારતૂસ સંભાળ

The spa uses easy-to-replace filter cartridges. Regularly check and clean the filter cartridges to ensure optimal water quality and system performance. Replace cartridges every few weeks or as needed, depending on usage.

૬. પાણીની રસાયણશાસ્ત્ર

Use the included chemical dispenser to maintain proper water chemistry. Follow the instructions for your chosen spa chemicals (tablets not included) to keep the water clean and safe. Test water regularly and adjust chemical levels as necessary.

Image: A chemical dispenser, designed for spa tablets, being held open with a tablet ready for placement.

3. Draining the Spa

To drain the spa, connect a garden hose to the drain valve located at the bottom of the spa. Open the valve to allow water to drain completely. Ensure the drainage area can handle the volume of water.

4. Insulated Cover

Always use the insulated cover when the spa is not in use. This minimizes heat loss and keeps debris out of the water.

મુશ્કેલીનિવારણ

• ગરમ ન થતો સ્પા: Check power connection, ensure filter is clean, and verify temperature setting on the control panel.
• Bubbles not working: Ensure the bubble jet button is activated and the control unit is properly connected.
• પાણીની ગુણવત્તાના મુદ્દાઓ: Clean or replace filter cartridges. Test water chemistry and adjust chemical levels as needed.
• હવાનું નુકશાન: Inspect the spa for punctures or loose valves. Use the included repair patches for minor leaks.

વિશિષ્ટતાઓ

Image: An infographic detailing the spa's water capacity, seating capacity, number of bubble jets, and temperature range.

Image: A visual representation of the spa's dimensions, showing its 77-inch diameter and 26-inch height.

વોરંટી અને આધાર

વોરંટી માહિતી અને ગ્રાહક સપોર્ટ માટે, કૃપા કરીને તમારા ઉત્પાદન સાથે સમાવિષ્ટ દસ્તાવેજોનો સંદર્ભ લો અથવા સત્તાવાર ઇન્ટેક્સની મુલાકાત લો. webસાઇટ. કોઈપણ વોરંટી દાવા માટે તમારી ખરીદીનો પુરાવો રાખો.