1. પરિચય
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Mad Mars 12V LED Motorcycle Scooter Turn Signals. Please read this manual thoroughly before installation and keep it for future reference.
2. સલામતી માહિતી
- ઇલેક્ટ્રિકલ સલામતી: શોર્ટ સર્કિટ અથવા ઇલેક્ટ્રિક શોકથી બચવા માટે કોઈપણ ઇલેક્ટ્રિકલ કાર્ય કરતા પહેલા વાહનની બેટરી હંમેશા ડિસ્કનેક્ટ કરો.
- વ્યવસાયિક સ્થાપન: If you are not familiar with motorcycle or scooter electrical systems, it is highly recommended to have these turn signals installed by a qualified professional.
- ભાગtage સુસંગતતા: These turn signals are designed for 12V DC systems only. Do not connect to higher voltage સિસ્ટમો.
- સુરક્ષિત માઉન્ટિંગ: Ensure the turn signals are securely mounted to prevent detachment during vehicle operation.
- CE Homologation: These turn signals are CE approved, indicating compliance with European safety standards.
3. પેકેજ સામગ્રી
- One (1) Pair of Mad Mars 12V LED Motorcycle Scooter Turn Signals (Orange)
4. સ્પષ્ટીકરણો
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| બ્રાન્ડ | પાગલ |
| મોડલ | મંગળ |
| ભાગtage | 12 વોલ્ટ ડીસી |
| પ્રકાશ સ્ત્રોત પ્રકાર | એલઇડી |
| આછો રંગ | નારંગી |
| Mounting Thread Diameter | 8 મીમી |
| Length (excluding thread) | 64 મીમી |
| ઊંડાઈ | 22 મીમી |
| ઊંચાઈ | 18 મીમી |
| Weight (per item) | 100 ગ્રામ (આશરે) |
| એસેમ્બલી જરૂરી | હા |
| પ્રમાણપત્ર | CE મંજૂર |
5. સેટઅપ અને ઇન્સ્ટોલેશન
યોગ્ય ઇન્સ્ટોલેશન માટે આ પગલાં કાળજીપૂર્વક અનુસરો. વ્યાવસાયિક ઇન્સ્ટોલેશનની ભલામણ કરવામાં આવે છે.
- વાહન તૈયાર કરો: ઇલેક્ટ્રિકલ જોખમોને રોકવા માટે ખાતરી કરો કે વાહનનું ઇગ્નીશન બંધ છે અને બેટરી ડિસ્કનેક્ટ થયેલ છે.
- Remove Old Turn Signals: Carefully remove the existing turn signals from your motorcycle or scooter. Note the wiring connections.
- Mount New Turn Signals: Insert the threaded bolt of the Mad Mars turn signal into the mounting hole. Secure it with the provided nut, ensuring it is tight but not overtightened. The thread diameter is 8mm.
Image 1: Mad Mars 12V LED Turn Signals. This image shows a pair of orange LED turn signals with their wiring and mounting hardware.
- વાયરિંગ કનેક્શન:
- Identify the positive wire of the Mad Mars turn signal (typically yellow or red) and the negative/ground wire (typically black).
- Connect the positive wire of the turn signal to the vehicle's positive turn signal wire.
- Connect the negative wire of the turn signal to the vehicle's negative or ground wire.
- Use appropriate electrical connectors (not included) and ensure all connections are secure and insulated to prevent short circuits.
- Repeat for Second Turn Signal: Follow the same steps for the other turn signal.
- બેટરી ફરીથી કનેક્ટ કરો અને પરીક્ષણ કરો: Reconnect the vehicle's battery. Turn on the ignition and test both turn signals to ensure they flash correctly. If they do not flash or flash too quickly/slowly, you may need a load resistor or an LED flasher relay (not included).
Image 2: Mad Mars 12V LED Turn Signals (Alternate View). This image provides another view of the orange LED turn signals, highlighting their compact design.
6. ઓપરેટિંગ સૂચનાઓ
Once properly installed, the Mad Mars 12V LED Turn Signals operate in conjunction with your motorcycle or scooter's existing turn signal switch. Activate the left or right turn signal switch as you normally would to indicate a turn or lane change. The LED lights will flash to provide clear visibility to other road users.
7. જાળવણી
- સફાઈ: Clean the turn signal lenses periodically with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the plastic.
- નિરીક્ષણ: Regularly check the mounting bolts for tightness and inspect the wiring for any signs of wear, fraying, or corrosion. Ensure the connections remain secure.
- LED ની આયુષ્ય: LED lights have a long lifespan and typically do not require replacement under normal operating conditions.
8. મુશ્કેલીનિવારણ
- Turn Signals Not Lighting Up:
- Check all wiring connections for proper contact and insulation.
- Verify that the vehicle's battery is charged and providing 12V power.
- Inspect the vehicle's turn signal fuse.
- Turn Signals Flashing Too Fast (Hyper-flashing):
- LED turn signals draw less power than traditional incandescent bulbs, which can cause the vehicle's flasher relay to interpret a bulb outage, resulting in hyper-flashing.
- This can typically be resolved by installing a load resistor (not included) in parallel with each LED turn signal or by replacing the stock flasher relay with an LED-compatible flasher relay (not included).
- Turn Signals Not Flashing (Solid On):
- This can also be caused by incompatibility with the vehicle's flasher relay. Consider installing a load resistor or an LED-compatible flasher relay.
9. વોરંટી અને સપોર્ટ
For warranty information or technical support, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.
