1. પરિચય
Thank you for choosing the Xigmatek Galaxy II ARGB Fan Series. This product is designed to provide efficient cooling and vibrant addressable RGB lighting for your computer case. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your fans.
2. પેકેજ સામગ્રી
કૃપા કરીને ચકાસો કે નીચે સૂચિબદ્ધ બધા ઘટકો તમારા પેકેજમાં શામેલ છે:
- 3 x Xigmatek AX120 ARGB Fans
- 1 x ARGB Control Box
- 1 x રીમોટ કંટ્રોલર
- માઉન્ટિંગ સ્ક્રૂ
- કનેક્શન કેબલ્સ
Image: Three Xigmatek AX120 ARGB fans, showcasing their translucent blades and black frames, designed for computer case cooling and lighting.
Image: The Xigmatek ARGB Control Box, a black rectangular unit with multiple ports for fan and LED connections, and buttons for LED speed, fan speed, and mode control.
Image: The Xigmatek ARGB Remote Controller, a white handheld device with various buttons for controlling fan speed, LED modes, LED speed, and color selection (R, G, B).
3. સ્પષ્ટીકરણો
| લક્ષણ | વિગત |
|---|---|
| મોડલ | EN42104 (Galaxy II ARGB Fan Series) |
| ચાહકનો પ્રકાર | AX120 ARGB Fan |
| ચાહકોની સંખ્યા | 3 |
| મહત્તમ રોટેશનલ સ્પીડ | 2200 RPM |
| ભાગtage | 12 વોલ્ટ (DC) |
| પાવર કનેક્ટર પ્રકાર | 3-Pin (Fan), ARGB (LED) |
| ઠંડક પદ્ધતિ | હવા |
| સામગ્રી | પ્લાસ્ટિક |
| સુસંગત ઉપકરણો | Desktop Computer Cases |
4. સેટઅપ અને ઇન્સ્ટોલેશન
Before beginning installation, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent damage to components.
4.1. ફેન ઇન્સ્ટોલેશન
- Identify suitable mounting locations within your computer case (e.g., front, top, rear, bottom).
- Position each fan in the desired location, ensuring proper airflow direction (typically, air flows from the open side of the fan towards the side with the support struts).
- Secure each fan using the provided mounting screws. Tighten screws until snug, but do not overtighten.
Image: A single Xigmatek AX120 ARGB fan, showing its black frame, translucent fan blades, and the central Xigmatek logo. This image helps visualize the fan for installation.
4.2. Control Box and Cable Connections
- Mount the ARGB Control Box in a convenient location within your case, away from moving parts and heat sources.
- Connect the 3-pin fan power cable from each AX120 fan to the "FAN" ports on the control box. The control box typically has numbered ports (e.g., 1-8).
- Connect the ARGB lighting cable from each AX120 fan to the "LED" ports on the control box. Ensure correct orientation to avoid damage.
- Connect the main power cable from the control box to a compatible power supply unit (PSU) connector (e.g., SATA power or Molex, depending on the control box design).
- (Optional) If your motherboard supports Addressable RGB (ARGB) synchronization, connect the control box's M/B Sync cable to the appropriate 5V ARGB header on your motherboard. Refer to your motherboard manual for header location.
- Ensure all cables are neatly routed and secured to prevent interference with other components or airflow.
5. ઓપરેટિંગ સૂચનાઓ
Once installed and powered on, you can control the fan speed and ARGB lighting effects using the included remote controller or the buttons on the control box.
5.1. રીમોટ કંટ્રોલરનો ઉપયોગ કરવો
- પાવર બટન: Turns the lighting on/off.
- મોડ +/-: Cycles through various ARGB lighting effects.
- LED SPEED: Adjusts the speed of the lighting effects.
- ચાહક ગતિ: Adjusts the fan rotation speed (Low, Medium, High).
- Color Buttons (R, G, B): સ્થિર લાલ, લીલો, અથવા વાદળી રંગો પસંદ કરે છે.
- M/B SYNC: Toggles between control box/remote control and motherboard ARGB synchronization (if connected).
- Other buttons may offer specific pre-set lighting patterns or brightness adjustments.
5.2. Using the Control Box Buttons
The control box typically features physical buttons for basic control:
- LED SPEED: Adjusts the speed of the lighting effects.
- DIRECTIONS: Cycles through various ARGB lighting effects.
- ચાહક ગતિ: Adjusts the fan rotation speed.
6. જાળવણી
Regular maintenance helps ensure optimal performance and extends the lifespan of your fans.
- ધૂળ દૂર કરવી: Periodically (e.g., every 3-6 months), power off your computer and use compressed air to gently remove dust buildup from the fan blades and frames. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- કેબલ મેનેજમેન્ટ: Ensure all cables remain securely connected and properly routed to avoid obstructing airflow or being caught by moving parts.
- નિરીક્ષણ: Occasionally inspect the fans and control box for any signs of wear, damage, or loose connections.
7. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| ચાહકો કાંતતા નથી | No power to control box; Loose fan connection; Faulty fan. | Check power cable to control box; Re-seat fan cables; Test individual fans if possible. |
| ARGB lights not working | Loose LED connection; Control box not powered; Motherboard sync issue; Faulty LED. | Check LED cables; Ensure control box has power; Toggle M/B SYNC; Try different LED port. |
| રીમોટ કંટ્રોલર પ્રતિસાદ આપતું નથી | Battery depleted; Obstruction; Remote out of range. | Replace remote battery; Ensure clear line of sight to control box; Operate within range. |
| ચાહકો ઘોંઘાટીયા છે | Dust buildup; Loose mounting screws; Fan bearing issue. | Clean fans; Tighten mounting screws; If noise persists, fan may need replacement. |
8. સલામતી માહિતી
- Always power off and unplug your computer before installing or performing maintenance on the fans.
- ફરતા પંખાના બ્લેડને સ્પર્શ કરવાનું ટાળો.
- Do not expose the control box or fans to moisture or extreme temperatures.
- બાળકોની પહોંચથી દૂર રાખો.
- ફક્ત આપેલા કેબલ અને એસેસરીઝનો જ ઉપયોગ કરો.
9. વોરંટી અને સપોર્ટ
Xigmatek products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the official Xigmatek website or contact your local retailer. Please retain your proof of purchase for warranty claims.
સત્તાવાર Webસાઇટ: www.xigmatek.com
