Antari WTR-20 Wireless Remote Kit Instruction Manual

પરિચય

This manual provides detailed instructions for the installation, operation, and maintenance of the Antari WTR-20 Wireless Remote Kit. This kit is designed to provide wireless control for compatible Antari fog, haze, and snow machines, enhancing operational flexibility.

ઉત્પાદન ઓવરview

The Antari WTR-20 Wireless Remote Kit consists of two main components: a handheld wireless transmitter (remote) and a receiver unit. The receiver connects to your compatible Antari machine, allowing the transmitter to send commands wirelessly.

છબી 1: The Antari WTR-20 Wireless Remote Kit. On the left is the silver-colored handheld remote control with four circular buttons labeled A, B, C, and D, and a blue indicator light. On the right is the black receiver unit with a white multi-pin connector at its base, designed to plug into a compatible Antari machine.

સેટઅપ

1. સુસંગતતા તપાસ

Ensure your Antari machine is compatible with the WTR-20 kit. This kit is designed for use with Antari models: AF-4R, FT-20, S-500, S-500XL, Z-380.

2. રીસીવર ઇન્સ્ટોલેશન

1. પાવર બંધ: Before connecting the receiver, ensure your Antari machine is powered off and unplugged from the main power supply.
2. Locate Remote Port: Identify the remote control input port on your Antari machine. This is typically a multi-pin connector.
3. રીસીવર કનેક્ટ કરો: Carefully align the receiver's connector with the machine's remote port and push it firmly into place. Do not force the connection.
4. સુરક્ષિત રીસીવર: If applicable, use any provided mounting hardware or integrated clips to secure the receiver unit to the machine, preventing accidental disconnection.

3. પાવર ચાલુ

Plug your Antari machine back into the power supply and turn it on. The receiver unit should power on automatically, indicated by an LED light (if present).

ઓપરેટિંગ સૂચનાઓ

The WTR-20 remote provides basic control functions for your compatible Antari machine. Specific functions of buttons A, B, C, and D may vary slightly depending on the connected machine model. Refer to your machine's specific manual for detailed button assignments.

• બટન એ: Typically activates continuous output or a primary function.
• બટન B: Often used for momentary output or a secondary function.
• બટન C: May control output duration or other programmable settings.
• બટન ડી: Can be assigned to a specific effect, timer, or other auxiliary function.

When a button is pressed, the blue indicator light on the remote will illuminate, confirming signal transmission. Ensure the remote is within operational range of the receiver for reliable control.

જાળવણી

Battery Replacement (Remote)

The handheld remote is powered by a small battery, typically a 12V A27 or similar. If the blue indicator light does not illuminate or the remote's range decreases significantly, the battery may need replacement.

1. Locate the battery compartment on the back or side of the remote.
2. Open the compartment using a small screwdriver or by sliding the cover.
3. Remove the old battery and insert a new one, ensuring correct polarity (+/-).
4. બેટરીના ડબ્બાને સુરક્ષિત રીતે બંધ કરો.

સફાઈ

Wipe the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter the units.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

• મોડલ: WTR-20
• કનેક્ટિવિટી ટેકનોલોજી: રેડીઓ તરંગ
• સમર્થિત ઉપકરણોની મહત્તમ સંખ્યા: 1 (per receiver)
• સુસંગત ઉપકરણો: Antari AF-4R, FT-20, S-500, S-500XL, Z-380
• Remote Feature: અર્ગનોમિક્સ ડિઝાઇન
• વસ્તુનું વજન: Approximately 10 pounds (for the kit, including packaging)
• ઉત્પાદક: અંતરી

વોરંટી અને આધાર

For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official Antari website. For technical support, service, or parts inquiries, please contact your authorized Antari dealer or Antari customer service directly.

Antari Official Webસાઇટ: www.antari.com