સ્ટેબિલા LAR 160 G ગ્રીન રોટેશન સેલ્ફ-લેવલિંગ લેસર સેટ યુઝર મેન્યુઅલ

1. પરિચય

This manual provides detailed instructions for the safe and effective use of your Stabila LAR 160 G Green Rotation Self-Leveling Laser Set. This professional-grade tool is designed for precise leveling tasks in both interior and exterior applications, featuring a highly visible green laser beam and robust construction.

ઉપકરણ ચલાવતા પહેલા કૃપા કરીને આ માર્ગદર્શિકાને સારી રીતે વાંચો અને ભવિષ્યના સંદર્ભ માટે તેને રાખો.

2. સલામતી માહિતી

Always observe the following safety precautions to prevent injury and damage to the device.

• લેસર રેડિયેશન: This product emits Class 2 laser radiation. Do not stare directly into the laser beam. Avoid direct eye exposure.
• સંચાલન પર્યાવરણ: Use the laser level only in well-ventilated areas. Keep the device away from moisture, dust, and extreme temperatures.
• બેટરી સલામતી: Use only recommended battery types. Ensure correct polarity when inserting batteries. Do not mix old and new batteries or different types of batteries. Dispose of batteries according to local regulations.
• જાળવણી: Do not attempt to modify or repair the device yourself. Refer all servicing to authorized Stabila service personnel.
• બાળકો અને અનધિકૃત કર્મચારીઓ: Keep the device out of reach of children and unauthorized personnel.

3. પેકેજ સામગ્રી

અનપેક કરતી વખતે ખાતરી કરો કે બધી વસ્તુઓ હાજર છે અને તેને કોઈ નુકસાન થયું નથી:

• Stabila LAR 160 G Green Rotation Laser
• REC 160 R/G Set Receiver
• BST-S Construction Tripod (height-adjustable from 39"–63" / 100–160 cm)
• Hi/Lo Elevation Rod (from 31.5"- 75'' / 80-190 cm)
• Magnetic High-Visibility Plastic Target Plate with Cross-Hair
• હાર્ડ શેલ વહન કેસ
• વપરાશકર્તા માર્ગદર્શિકા

4. ઉત્પાદન સુવિધાઓ

The Stabila LAR 160 G offers a range of features for professional leveling applications:

• Fully Automatic, Motor-Driven Rotation Laser: Ensures high leveling accuracy of ± 0.1 mm/m (1/8 inch @ 100 ft).
• Fast Self-Leveling Function: Achieves level within 20 seconds.
• STABILA GREENBEAM Technology: Green laser beams are four times more visible to the human eye than red beams, improving visibility in various conditions.
• Four Laser Functions: Supports horizontal rotation, vertical rotation, plumb-line function, and square (90°) in vertical operation for versatile use.
• IP 65 Protection Class: Dustproof and waterproof, suitable for demanding job site conditions.
• Shock-Absorbent Casing: STABILA soft grip casing provides protection against impacts, with a stable housing cover protecting the laser optics.
• સરળ નિયંત્રણ: Operated via three control buttons: on/off, tilt mode, and manual mode.
• Accessible Battery Drawer: Allows for easy battery replacement, even when the device is mounted on a tripod.
• મોટો કાર્યક્ષેત્ર: Up to 600 m (2000 ft) in diameter when used with the REC 160 R/G set receiver.
• બહુમુખી માઉન્ટિંગ: Two 5/8" x 11 threads integrated in the housing for vertical and horizontal applications.

5. સેટઅપ

5.1 બેટરી ઇન્સ્ટોલેશન

1. Locate the battery drawer on the side of the laser unit.
2. Open the battery drawer and insert the required D-type batteries, ensuring correct polarity (+/-).
3. Close the battery drawer securely.

5.2 Mounting the Laser on the Tripod

1. Extend the legs of the BST-S construction tripod to a stable position.
2. Place the Stabila LAR 160 G laser unit onto the tripod head, aligning the 5/8" x 11 thread.
3. Securely fasten the laser unit to the tripod by turning the tripod's mounting screw.
4. Adjust the tripod height as needed for your application.

5.3 Positioning the Laser

Place the tripod with the laser unit on a firm, level surface. Ensure the area is clear of obstructions that could interfere with the laser beam.

6. ઓપરેટિંગ સૂચનાઓ

6.1 Power On/Off and Self-Leveling

1. દબાવો ચાલુ/બંધ button (marked with a power symbol) to power on the device.
2. The laser will automatically begin its self-leveling process. This typically takes about 20 seconds.
3. Once leveled, the laser beam will rotate continuously.
4. પાવર ઓફ કરવા માટે, દબાવો ચાલુ/બંધ ફરીથી બટન.

6.2 Laser Functions

The LAR 160 G supports four primary laser functions:

• આડું પરિભ્રમણ: For creating a level plane across a large area. This is the default mode after self-leveling.
• વર્ટિકલ રોટેશન: Mount the laser vertically using the side 5/8" thread. The laser will project a vertical plane.
• Plumb-Line Function: In vertical operation, the laser can project a plumb-line (vertical point) for alignment.
• Square (90°) Function: In vertical operation, the laser can project a second beam at 90 degrees to the main vertical plane for squaring applications.

6.3 Tilt Mode

The tilt mode allows for manual slope setting. Press the ઝુકાવ button (labeled 'tilt') to activate. In this mode, the laser will maintain its current angle even if the device is slightly disturbed, but it will not self-level. Use this for setting specific grades.

6.4 મેન્યુઅલ મોડ

દબાવો મેન્યુઅલ button (labeled 'man') to disable self-leveling and manually adjust the laser plane. This is useful for specific non-level applications or when working with a grade rod for slope calculations.

6.5 Using the REC 160 R/G Receiver

For outdoor use or when the laser beam is not visible, use the REC 160 R/G receiver:

1. રીસીવર પર પાવર.
2. Move the receiver into the path of the rotating laser beam.
3. The receiver will indicate when it detects the laser beam, typically with visual and audible signals.
4. Adjust the receiver's position until the center indicator is active, marking the exact level.

6.6 Using the Hi/Lo Elevation Rod

The elevation rod is used in conjunction with the receiver to measure and transfer heights:

1. Attach the REC 160 R/G receiver to the elevation rod.
2. લાકડીને ઇચ્છિત .ંચાઈ સુધી લંબાવો.
3. Use the receiver to find the laser plane on the rod, then read the measurement.

7. જાળવણી

7.1 સફાઈ

ઉપકરણને સોફ્ટ સાથે સાફ કરો, ડીamp cloth. Do not use harsh cleaning agents or solvents. Ensure the laser optics are clean and free of dust for optimal performance.

7.2 બેટરી કેર

Remove batteries if the device will not be used for an extended period to prevent leakage. Replace batteries when the low battery indicator appears or performance degrades.

7.3 સંગ્રહ

Store the laser set in its hard shell carrying case in a dry, cool place, away from direct sunlight and extreme temperatures.

7.4 માપાંકન

Regularly check the calibration of your laser level. If you suspect inaccuracies, contact an authorized Stabila service center for professional calibration.

8. મુશ્કેલીનિવારણ

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

The Stabila LAR 160 G Green Rotation Self-Leveling Laser Set is covered by a 2 વર્ષની મર્યાદિત વોરંટી ખરીદીની તારીખથી. આ વોરંટી સામાન્ય ઉપયોગ હેઠળ સામગ્રી અને કારીગરીમાં ખામીઓને આવરી લે છે.

For warranty claims, technical support, or service inquiries, please contact Stabila customer service or visit the official Stabila website. Please have your product model number (LAR 160 G) and part number (04500TR) available when contacting support.

વધુ માહિતી માટે, મુલાકાત લો: www.stabila.com