SWIFT S7 Series Trinocular Stereo Zoom Microscope Instruction Manual

1. પરિચય

This manual provides detailed instructions for the assembly, operation, and maintenance of your SWIFT S7 Series Trinocular Stereo Zoom Microscope. This professional-grade microscope is designed for a wide range of applications, including research, gemology, engraving, electronics inspection, and biological laboratory work. It offers a magnification range of 3.5X-90X with included accessories, providing clear and sharp images for detailed observation.

2. સલામતી માહિતી

• Always handle the microscope with care. Avoid sudden movements or impacts.
• Place the microscope on a stable, level surface to prevent tipping.
• Keep the microscope away from direct sunlight, high temperatures, dust, and corrosive chemicals.
• Ensure the power supply is disconnected before cleaning or performing any maintenance.
• Do not attempt to disassemble optical or electrical components beyond what is described in this manual. Refer to qualified service personnel for repairs.
• Use only the provided power adapter for the LED ring light.

3. પેકેજ સામગ્રી

અનપેક કરતી વખતે ખાતરી કરો કે બધા ઘટકો હાજર છે:

• Microscope Body (Trinocular Head with 0.7X-4.5X Zoom Objective)
• Table Pillar Stand with Base
• WF10X Eyepieces (2)
• Eyepiece Eyeshields (2)
• 0.5X Auxiliary Objective
• 2.0X Auxiliary Objective
• 56-Bulb LED Ring Light
• Power Adapter for LED Ring Light
• Black & White Reversible Stage પ્લેટ
• Stage Clips (2)
• ડસ્ટ કવર
• વપરાશકર્તા માર્ગદર્શિકા
• Optional: Camera Mount, Eyepiece Camera, Data Wire (if purchased separately)

4. સેટઅપ સૂચનાઓ

તમારા માઇક્રોસ્કોપને એસેમ્બલ કરવા માટે આ પગલાં અનુસરો:

1. Mount the Microscope Body:
   Adjust the table pillar stand to a proper height. Carefully place the microscope body into the ring of the table pillar stand. Secure it by tightening the fixed knob on the stand.
2. Install the LED Ring Light:
   Slide the 56-bulb LED ring light onto the objective housing at the bottom of the microscope body. Tighten the small bolt on the ring light to secure it. Connect the power wire from the ring light to its power adapter.
3. Install Eyepieces and Eyeshields:
   Attach the rubber eyeshields to the top of each WF10X eyepiece. Insert the eyepieces into the eyepiece tubes on the trinocular head. Ensure they are fully seated.
4. Place the Working Stage:
   Choose either the black or white side of the reversible stage plate depending on your sample contrast needs. Place it into the circular recess on the microscope base. Use the stage clips to hold samples in place if necessary.
5. Optional: Install Auxiliary Objectives:
   For extended magnification ranges, screw the 0.5X or 2.0X auxiliary objective onto the bottom of the main zoom objective.

છબી વર્ણન: એક સંપૂર્ણ view of the SWIFT S7 Series Trinocular Stereo Zoom Microscope, disassembled with its main components including the microscope head, pillar stand, eyepieces, auxiliary objectives, and LED ring light.

5. ઓપરેટિંગ સૂચનાઓ

1. પાવરિંગ ચાલુ:
   Connect the LED ring light's power adapter to an electrical outlet. Turn on the power switch for the LED illumination.
2. Placing a Sampલે:
   Place your specimen on the working stage. Use the stage clips to hold it securely if needed.
3. Adjusting Magnification (Zoom):
   Rotate the zoom handwheel on the microscope body to adjust the magnification from 0.7X to 4.5X. With the WF10X eyepieces, this provides a 7X-45X magnification range. Additional auxiliary objectives (0.5X, 2.0X) can extend this range.
4. ધ્યાન કેન્દ્રિત:
   While looking through the eyepieces, slowly turn the focusing handwheel (large knob on the side of the stand) until the specimen comes into sharp focus.
5. એડજસ્ટિંગ ડાયોપ્ટર:
   If one eye sees a sharper image than the other, adjust the diopter ring on the eyepiece until both eyes perceive a clear, unified image.
6. Adjusting Interpupillary Distance:
   Gently push or pull the eyepiece tubes apart or together until you see a single, circular field of view.
7. Trinocular Port Usage (for Camera):
   The trinocular port allows for the attachment of a camera for digital imaging. Remove the dust cap from the trinocular port. Install the camera mount, then attach the eyepiece camera. Connect the camera to a computer using the provided data wire.

છબી વર્ણન: એક ક્લોઝ-અપ view of the SWIFT S7 Series microscope with its 56-bulb LED ring light illuminating a circuit board placed on the stage, demonstrating its application for electronics inspection.

છબી વર્ણન: A composite image highlighting key features of the microscope head: 45-degree ergonomic tilt, 360-degree rotation for flexible viewing, diopter adjustment on eyepieces, the 0.7X-4.5X zoom objective, and securing screws to prevent components from falling.

6. Camera Installation and Digital Imaging

For digital capture and analysis, follow these steps to integrate a camera with your microscope:

1. Prepare the Trinocular Port:
   Remove the protective cap from the trinocular port located on top of the microscope head.
2. Assemble Camera Components:
   If your camera requires an adapter or C-mount, assemble these components according to the camera's instructions.
3. Install Camera Mount:
   Insert the camera mount into the trinocular port and secure it.
4. કેમેરા જોડો:
   Carefully attach your eyepiece camera to the installed camera mount.
5. કમ્પ્યુટરથી કનેક્ટ કરો:
   Connect the camera to your computer using the appropriate data cable (e.g., USB). Install any necessary software or drivers provided with your camera.
6. સૉફ્ટવેર ઑપરેશન:
   Launch the camera software on your computer. The software will display the live image from the microscope. Use the software to capture images, record videos, and perform measurements or analysis.

છબી વર્ણન: The SWIFT S7 Series microscope with an attached camera connected to a laptop, showing a magnified view of a circuit board on the computer screen, illustrating its digital imaging capabilities.

7. જાળવણી

• સફાઈ ઓપ્ટિક્સ: Use a soft, lint-free cloth and specialized lens cleaning solution for optical surfaces. Avoid touching lenses with bare hands.
• શરીરની સફાઈ: માઇક્રોસ્કોપ બોડીને સોફ્ટ, ડી વડે સાફ કરોamp કાપડ કઠોર રસાયણો અથવા ઘર્ષક ક્લીનર્સનો ઉપયોગ કરશો નહીં.
• સંગ્રહ: When not in use, cover the microscope with the provided dust cover to protect it from dust and debris. Store in a dry, cool place.
• લુબ્રિકેશન: Moving parts are factory-lubricated. Do not apply additional lubricants unless specifically instructed by SWIFT support.

8. મુશ્કેલીનિવારણ

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

For warranty information, technical support, or service inquiries, please refer to the official SWIFT webસાઇટ પર જાઓ અથવા તમારા અધિકૃત ડીલરનો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.