Lepro 32.8ft RGB LED Strip Lights User Manual

1. પરિચય

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Figure 1: Complete Lepro LED Strip Lights Kit

2. પેકેજ સામગ્રી

ખાતરી કરો કે બધા ઘટકો પેકેજમાં હાજર છે:

• 2 x 16.4ft (5m) RGB LED Strip Lights
• 1 x 44-Key IR Remote Control
• 1 x 12 વી પાવર એડેપ્ટર
• 1 x Control Box (IR Receiver)

3. સ્થાપન અને સેટઅપ

યોગ્ય ઇન્સ્ટોલેશન માટે આ પગલાં અનુસરો:

1. સપાટી તૈયાર કરો: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
2. Measure and Cut (Optional): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
3. Attach the Strip: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
4. ઘટકો જોડો:
   • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
   • Connect the 12V power adapter to the control box.
   • પાવર એડેપ્ટરને પ્રમાણભૂત ઇલેક્ટ્રિકલ આઉટલેટમાં પ્લગ કરો.
5. રિમોટ સક્રિય કરો: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

4. ઓપરેટિંગ સૂચનાઓ

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

Figure 3: 44-Key IR Remote Control Layout

દૂરસ્થ નિયંત્રણ કાર્યો:

• ચાલુ/બંધ: Power button to turn the lights on or off.
• બ્રાઇટનેસ એડજસ્ટમેન્ટ: Up/Down arrows to increase or decrease brightness.
• રંગ પસંદગી: 20 preset static colors, including Red, Green, Blue, and White.
• DIY રંગો: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
• ડાયનેમિક મોડ્સ: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. જાળવણી

To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:

• સફાઈ: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
• પર્યાવરણ: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
• એડહેસિવ કેર: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. મુશ્કેલીનિવારણ

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

7. ઉત્પાદન સ્પષ્ટીકરણો

8. વોરંટી માહિતી

આ ઉત્પાદન એ દ્વારા આવરી લેવામાં આવે છે 2 વર્ષની વોરંટી from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. ગ્રાહક આધાર

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.