ABB 1SVR730700R2200 તાપમાન મોનિટરિંગ રિલે વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the ABB 1SVR730700R2200 Temperature Monitoring Relay. Please read this manual thoroughly before attempting to install or operate the device. Retain this manual for future reference.

The ABB 1SVR730700R2200 is designed for reliable temperature monitoring in industrial applications, featuring 2CO (changeover) SPDT contacts and compatibility with 110-130Vac and 220-240Vac power supplies.

2. સલામતી સૂચનાઓ

WARNING: Risk of electric shock. Installation and maintenance must be performed by qualified personnel only. Disconnect power before working on the device.

• ખાતરી કરો કે ઇન્સ્ટોલેશન દરમિયાન તમામ સ્થાનિક અને રાષ્ટ્રીય વિદ્યુત કોડનું પાલન કરવામાં આવે છે.
• ચકાસો કે પાવર સપ્લાય વોલtage matches the device's specifications.
• જો ઉપકરણ ક્ષતિગ્રસ્ત જણાય તો તેને ચલાવશો નહીં.
• ઉપકરણને ભેજ, ધૂળ અને અતિશય તાપમાનથી સુરક્ષિત કરો.

3. ઉત્પાદન ઓવરview

The ABB 1SVR730700R2200 is a compact temperature monitoring relay designed for DIN rail mounting. It provides continuous monitoring of temperature and activates its output contacts upon detecting deviations from set thresholds.

આકૃતિ 3.1: ફ્રન્ટ view of the ABB 1SVR730700R2200 Temperature Monitoring Relay. The image shows the device with terminal connections labeled A1, 11, 21, A3, T2, T1, 24, 22, S1, and 14. The model number CM-MSS 23S and 1SVR730700R2200 are visible on the side label, along with various certifications and electrical ratings. The front panel includes a 'Reset' button and indicators for 'U' (supply voltage) and 'F' (fault).

મુખ્ય ઘટકો:

• ટર્મિનલ્સ: For power supply, sensor input, and output contacts (e.g., A1, A3 for supply; T1, T2 for sensor; 11, 14, 21, 22, 24 for contacts).
• સૂચક: LEDs for status indication (e.g., 'U' for supply voltage, 'F' for fault).
• રીસેટ બટન: To clear fault conditions.
• Settings (if applicable): Dials or switches for threshold adjustment.

4. સ્થાપન અને સેટઅપ

4.1 માઉન્ટ કરવાનું

The relay is designed for mounting on a standard 35mm DIN rail. Ensure sufficient space around the device for ventilation and access to terminals.

1. Hook the top edge of the relay onto the DIN rail.
2. Press the bottom edge of the relay firmly until it clicks into place.
3. Verify that the relay is securely fastened to the DIN rail.

4.2.૨.૨ વાયરિંગ

Refer to the wiring diagram on the side of the device and the following instructions for correct connections. Use appropriate wire gauges for the current and voltagઇ રેટિંગ્સ.

• Power Supply (A1, A3): Connect the appropriate AC voltage (110-130Vac or 220-240Vac) to terminals A1 and A3. Ensure the voltage matches the device's rating.
• Sensor Input (T1, T2): Connect the temperature sensor (e.g., PTC thermistor) to terminals T1 and T2.
• Output Contacts (11, 14, 21, 22, 24): The relay features two changeover (SPDT) contacts.
  • Contact 1: Common (11), Normally Open (14).
  • Contact 2: Common (21), Normally Closed (22), Normally Open (24).
  Connect the controlled circuit to these terminals as required by your application.

Note: The image shows terminals 11, 21, A1, A3, T2, T1 on the top, and 24, 22, S1, 14 on the bottom. The internal diagram shows 11-14 (NO), 21-22 (NC), 21-24 (NO).

5. ઓપરેટિંગ સૂચનાઓ

૫.૧ પ્રારંભિક પાવર-અપ

1. After completing all wiring, apply power to the A1 and A3 terminals.
2. The 'U' (supply voltage) indicator LED should illuminate, indicating that the device is powered.
3. The relay will perform a self-test. If the temperature is within the normal operating range and no fault is detected, the output contacts will be in their normal state.

5.2 Monitoring and Fault Indication

The relay continuously monitors the temperature via the connected sensor. If the temperature exceeds or falls below the configured thresholds (internal or external to the sensor type), a fault condition will be triggered.

• When a fault occurs, the 'F' (fault) indicator LED will illuminate.
• The output contacts will change state according to the configured relay function (e.g., normally open contacts close, normally closed contacts open).

૬.૨ રિલે રીસેટ કરવું

After a fault condition has been resolved, the relay can be reset.

• મેન્યુઅલ રીસેટ: Press the 'Reset' button on the front panel.
• સ્વચાલિત રીસેટ: Some configurations may allow for automatic reset once the temperature returns to the normal range. Refer to the specific product variant documentation for details on automatic reset functionality.

6. જાળવણી

The ABB 1SVR730700R2200 is designed for maintenance-free operation under normal conditions. However, periodic checks are recommended to ensure optimal performance and longevity.

• સફાઈ: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• ટર્મિનલ જોડાણો: Periodically check all terminal connections for tightness to prevent loose contacts, which can lead to overheating or intermittent operation.
• પર્યાવરણીય પરિસ્થિતિઓ: ખાતરી કરો કે કાર્યકારી વાતાવરણ નિર્દિષ્ટ તાપમાન અને ભેજની શ્રેણીમાં રહે છે.

7. મુશ્કેલીનિવારણ

This section provides solutions to common issues encountered with the temperature monitoring relay.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For information regarding product warranty, please refer to the official ABB warranty policy available on their website or contact your local ABB representative. Technical support is available through ABB's official channels.

ABB Contact Information: Please visit the official ABB website for the most up-to-date contact details for technical support and service in your region.