ઉત્પાદન ઓવરview
The Giant RideDash Plus E-Bike Computer is specifically designed for e-bikes, providing essential ride and e-bike system data. It utilizes an ANT+ interface for wireless communication, ensuring seamless data transmission when connected to an active e-bike system. This computer enhances your riding experience by displaying crucial information such as speed, time, distance, assist level, battery capacity, and remaining range.
આકૃતિ 1: આગળ view of the Giant RideDash Plus E-Bike Computer. The display shows current speed in km/h, time, and battery status. The device features three physical buttons at the bottom for navigation and control.
સેટઅપ
- માઉન્ટ કરવાનું: The RideDash Plus is designed for easy and wireless mounting on your bicycle handlebars or stem. Ensure the mount is securely fastened to prevent movement during rides.
- પ્રારંભિક પાવર-ઓન: Press and hold the center button to power on the device. The display will illuminate.
- E-Bike System Pairing (ANT+):
- Ensure your e-bike system is powered on and active.
- The RideDash Plus will automatically attempt to connect to your e-bike's ANT+ system.
- A successful connection will be indicated on the display, allowing wireless transmission of e-bike data.
- સમય અને એકમ સેટિંગ્સ: Refer to the on-screen prompts or navigate through the settings menu using the left and right buttons to set the correct time and preferred units (e.g., km/h or mph).
ઓપરેટિંગ સૂચનાઓ
The RideDash Plus provides real-time cycling and e-bike status information. Use the buttons at the bottom of the device to navigate through different display screens and settings.
- માહિતી દર્શાવો:
- Cycling Data: Speed (current, average, max), time, and distance.
- E-Bike Status: Assist level, battery capacity, and estimated remaining range.
- બટન કાર્યો: The device features three buttons: a center button and two arrow buttons (left and right).
- કેન્દ્ર બટન: Typically used for confirming selections or entering/exiting menus.
- Left/Right Arrow Buttons: Used for navigating through display screens, adjusting settings, or changing values.
- E-Bike System Connection: The computer relies on an active e-bike system connection via ANT+ for full functionality. If the e-bike is switched off, the RideDash Plus will lose its connection to the e-bike system and will not be able to save or display e-bike specific data for that trip. Basic cycling data (speed, time, distance) may still be recorded if the device has its own sensors or GPS, but e-bike integration will be absent.
જાળવણી
- સફાઈ: ઉપકરણને સોફ્ટ સાથે સાફ કરો, ડીamp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the screen or casing.
- બેટરી: The device includes a battery. If the battery is user-replaceable, follow the instructions in the full product manual for replacement. Ensure proper disposal of old batteries according to local regulations.
- સંગ્રહ: Store the computer in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| No e-bike data displayed (assist level, range, battery) | E-bike system is off or connection lost. | Ensure your e-bike system is powered on and active. Check for any interference or distance issues with the ANT+ connection. |
| Display is blank or not turning on | ઓછી અથવા ખાલી થયેલી બેટરી. | Replace or recharge the battery as per the full product manual. |
| Incorrect speed or distance readings | Improper sensor calibration or placement (if applicable). | Verify sensor placement and calibration settings. Ensure the wheel circumference is correctly entered if required. |
વિશિષ્ટતાઓ
- બ્રાન્ડ: જાયન્ટ
- મોડલ નંબર: 6695871545423
- કનેક્ટિવિટી: ANT+ (for wireless e-bike data transmission)
- પ્રદર્શન: ડિજિટલ એલસીડી
- માનવ ઇન્ટરફેસ ઇનપુટ: બટનો
- સમાવાયેલ ઘટકો: બેટરી
- રંગ: No-colour (Black)
- પ્રથમ ઉપલબ્ધ: 27 ફેબ્રુઆરી 2022
