એરોકૂલ મિરાજ 12 ARGB પીસી ફેન સૂચના માર્ગદર્શિકા

1. પરિચય

Thank you for choosing the Aerocool Mirage 12 ARGB PC Fan. This manual provides detailed instructions for the installation, operation, and maintenance of your new fan. The Mirage 12 ARGB fan features an Infinity Mirror RGB design and is compatible with Addressable RGB motherboards for customizable lighting effects. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. સલામતી માહિતી

• Ensure your computer system is powered off and disconnected from the main power supply before installation.
• નુકસાન ટાળવા માટે ઘટકોને કાળજીપૂર્વક હેન્ડલ કરો.
• Do not attempt to modify the fan or its connectors.
• બાળકોની પહોંચથી દૂર રાખો.
• Refer to your motherboard manual for specific ARGB header and fan header locations and voltage જરૂરિયાતો.

3. પેકેજ સામગ્રી

The Aerocool Mirage 12 ARGB PC Fan package includes the following items:

• 1 x Aerocool Mirage 12 ARGB PC Fan (120mm)
• માઉન્ટિંગ સ્ક્રૂ

છબી 1: આગળ view of the Aerocool Mirage 12 ARGB PC Fan, showcasing its infinity mirror RGB lighting effect.

4. સ્થાપન માર્ગદર્શિકા

4.1 ભૌતિક સ્થાપન

1. Identify the desired mounting location within your PC case (e.g., front, rear, top, bottom).
2. Position the fan in the chosen location, ensuring proper airflow direction (typically, the side with the frame supports and sticker is the exhaust side).
3. Secure the fan to the case using the provided mounting screws. Do not overtighten.

છબી ૨.૧: પાછળ view of the Aerocool Mirage 12 ARGB PC Fan, illustrating the fan blade structure and motor hub.

4.2 વિદ્યુત જોડાણ

1. Locate the 6-pin connector on the fan cable.
2. Connect the 6-pin connector to a compatible Aerocool H66F RGB Control Hub (if available) or a similar Addressable RGB controller that supports 6-pin fan connections.
3. If using an H66F RGB Control Hub, connect the hub to your motherboard's 4-pin PWM fan header for fan speed control and a 3-pin 5V Addressable RGB header for lighting control. Refer to the H66F hub manual for detailed instructions.
4. તમારી સિસ્ટમ પર પાવર કરતા પહેલા બધા કનેક્શન્સ સુરક્ષિત છે તેની ખાતરી કરો.

છબી 3: ક્લોઝ-અપ view of the 6-pin connector, used for both power and ARGB signal transmission.

5. ઓપરેશન

૩.૨ ARGB લાઇટિંગ કંટ્રોલ

The Aerocool Mirage 12 ARGB fan's lighting can be controlled via a compatible Addressable RGB motherboard or an external ARGB controller (e.g., Aerocool H66F RGB Control Hub).

• મધરબોર્ડ સોફ્ટવેર: If connected to a 3-pin 5V ARGB header on your motherboard, use the motherboard's proprietary software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to customize lighting effects, colors, and patterns.
• બાહ્ય નિયંત્રક: If connected to an external ARGB controller, refer to the controller's manual for instructions on how to adjust lighting settings.

5.2 ફેન સ્પીડ કંટ્રોલ

The fan speed is controlled via the 6-pin connector, which typically interfaces with a PWM-compatible fan header on your motherboard (often through a control hub like the H66F). You can adjust fan speeds through your motherboard's BIOS/UEFI settings or dedicated fan control software.

• Ensure your motherboard's 4-pin fan header is PWM compatible for optimal speed control.
• Adjust fan curves in your motherboard's BIOS/UEFI or operating system software to balance cooling performance and noise levels.

6. જાળવણી

To ensure optimal performance and longevity of your Aerocool Mirage 12 ARGB PC Fan, periodic cleaning is recommended.

• પાવર બંધ: Always power off your computer and disconnect it from the power supply before cleaning.
• ધૂળ દૂર કરવી: Use compressed air or a soft, dry cloth to gently remove dust accumulation from the fan blades and frame.
• પ્રવાહી ટાળો: Do not use liquid cleaners or immerse the fan in water.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

વોરંટી માહિતી અને ટેકનિકલ સપોર્ટ માટે, કૃપા કરીને સત્તાવાર AeroCool નો સંદર્ભ લો. webસાઇટ પર જાઓ અથવા તમારા સ્થાનિક રિટેલરનો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીનો પુરાવો રાખો.

એરોકુલ ઓફિશિયલ Webસાઇટ: www.aerocool.io