1. પરિચય
The Fender Acoustic Junior GO amplifier is designed to provide full, natural sound for acoustic-electric guitars and vocals. This portable system features two independent channels, each equipped with studio-quality effects. Key functionalities include Bluetooth wireless audio streaming and an integrated 90-second looper, making it suitable for various performance settings. Its rechargeable battery allows for extended use without a power outlet.
2. સેટઅપ
2.1. અનપેકિંગ
કાળજીપૂર્વક દૂર કરો amplifier from its packaging. Retain all packaging materials for future transport or storage. Inspect the amplifier for any signs of damage. If damage is present, contact your retailer immediately.
2.2. પાવર ચાલુ અને ચાર્જ કરવું
The Acoustic Junior GO amplifier is equipped with a rechargeable lithium-ion battery. For initial use, it is recommended to fully charge the battery. Connect the provided power adapter to the amplifier's power input and then to a suitable electrical outlet. The charging indicator will illuminate. A full charge provides approximately 5 hours of playing time at full volume or 12 hours at moderate volume. The amplifier can also be operated while connected to AC power.
2.3. Connecting Instruments and Microphones
આ amplifier features two independent channels:
- ચેનલ 1: Designed for acoustic-electric guitars. Connect your instrument using a standard 1/4-inch instrument cable.
- ચેનલ 2: Designed for microphones. Connect your microphone using an XLR cable. This channel also supports 1/4-inch instrument inputs.
ચાલુ કરતા પહેલા ખાતરી કરો કે બધા જોડાણો સુરક્ષિત છે ampજીવંત
3. ઓપરેટિંગ સૂચનાઓ
3.1. ચેનલ નિયંત્રણો
Each channel features independent controls for volume, equalization (bass, middle, treble), and effects. Adjust these controls to achieve your desired sound. Experiment with different settings to find the optimal tone for your instrument or voice.
3.2. બ્લૂટૂથ જોડી
To stream audio wirelessly from a phone or tablet:
- તમારા મોબાઇલ ઉપકરણ પર બ્લૂટૂથ સક્રિય કરો.
- Press the Bluetooth pairing button on the amplifier. The indicator light will flash.
- Select 'Fender Acoustic Junior GO' from the list of available devices on your mobile device.
- Once paired, the indicator light will remain solid, and you can stream audio through the ampજીવંત
3.3. Looper Function
The onboard 90-second looper allows for recording and layering audio. The looper controls include:
- Record/Dub: Press once to start recording. Press again to overdub.
- ચલાવો/રોકો: Press once to play the loop. Press again to stop.
- પૂર્વવત્ કરો: Reverts the last overdub.
Refer to the detailed looper section in the full manual for advanced techniques.
3.4. Tilt-Back Kickstand
આ amplifier features an integral tilt-back kickstand. This allows you to angle the amplifier upwards, directing the sound more effectively towards the performer or audience, especially in smaller venues or when placed on the floor.
4. જાળવણી
4.1. સફાઈ
સાફ કરવા માટે ampલાઈફાયર્સ માટે, નરમ, સૂકા કપડાનો ઉપયોગ કરો. હઠીલા ગંદકી માટે, થોડો ડીamp cloth may be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2. સંગ્રહ
સ્ટોર કરો amplifier in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
4.3. બેટરી કેર
To maximize the life of the lithium-ion battery:
- નિયમિતપણે બેટરીને સંપૂર્ણપણે ડિસ્ચાર્જ કરવાનું ટાળો.
- છતી ન કરો ampઅતિશય ગરમી અથવા ઠંડી માટે લિફાયર.
- જો ધ amplifier will not be used for several months, charge it to approximately 50% every 3-6 months.
5. મુશ્કેલીનિવારણ
This section addresses common issues you might encounter with your Fender Acoustic Junior GO ampજીવંત
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| કોઈ ધ્વનિ આઉટપુટ નથી | Volume controls are low; cables are not connected properly; instrument/microphone issue; ampલાઇફાયર ચાલુ નથી. | Check all volume knobs (master, channel, instrument/mic). Ensure cables are securely connected. Verify instrument/microphone functionality. Confirm amplifier is powered on and charged. |
| બ્લૂટૂથ જોડી રહ્યું નથી | Bluetooth not activated on device; amplifier not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Press the amplifier's Bluetooth button to enter pairing mode. Move your device closer to the ampજીવંત |
| Looper not recording/playing | Incorrect button sequence; looper memory full (unlikely for 90s). | Review the looper operating instructions. Ensure you are pressing the correct buttons for record, dub, play, and stop. |
| વિકૃત અવાજ | Input signal too high; volume too high; faulty cable. | Reduce the input gain or volume on the instrument/microphone channel. Lower the master volume. Try a different cable. |
6. સ્પષ્ટીકરણો
| લક્ષણ | વિગત |
|---|---|
| મોડેલનું નામ | Acoustic Junior GO |
| મોડલ નંબર | 2314400000 |
| બ્રાન્ડ | ફેન્ડર |
| આઉટપુટ વોટtage | 100 વોટ્સ |
| ઉત્પાદન પરિમાણો | 16 x 20 x 16 inches (Height x Width x Depth) |
| વસ્તુનું વજન | 20.6 પાઉન્ડ |
| બેટરીનો પ્રકાર | રિચાર્જેબલ લિથિયમ-આયન |
| બેટરી જીવન | Up to 5 hours (full volume), 12 hours (moderate volume) |
| કનેક્ટિવિટી | Bluetooth, 1/4-inch instrument input, XLR microphone input |
| લૂપર | 90-second with Record/Dub, Play/Stop, Undo |
| ભાગtage | યુનિવર્સલ વોલ્યુમtagવૈશ્વિક ઉપયોગ માટે e |
7. વોરંટી અને સપોર્ટ
Fender products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for warranty claims.
Supportનલાઇન સપોર્ટ: www.fender.com/support
