ઉત્પાદન ઓવરview
The Samson Concert 88x Handheld wireless system is designed for professional audio applications, offering ease of use and reliable performance. It features a rack-mountable CR88x receiver with 100 wireless frequencies across a 25 MHz bandwidth, ensuring clear channel selection through one-touch scanning. The system's True Diversity design minimizes signal dropouts, while tone-key and auto-mute technologies prevent unwanted noise.
The system provides crystal clear audio and flawless wireless reception within a 300-foot line-of-sight range. The CR88x receiver offers both balanced XLR and unbalanced 1/4” audio connections for versatile integration with amplifiers, sound systems, or recording devices. Its half-rack housing and included rackmount kit facilitate installation in portable racks or permanent venues.
The CH88 handheld transmitter is equipped with the Samson Q7 dynamic microphone capsule, known for its enhanced dynamic range and excellent transient response. The super-cardioid pickup pattern effectively rejects off-axis noise and reduces feedback. The transmitter operates for up to eight hours on two AA batteries.
Image: The Samson Concert 88x Handheld UHF Wireless System, showing the CR88x receiver and the CH88 handheld microphone.
બૉક્સમાં શું છે
- CH88 Handheld Transmitter with Q8x Dynamic Microphone
- CR88x રીસીવર
- રેકમાઉન્ટ કીટ
- માલિકની માર્ગદર્શિકા
Image: Contents of the Samson Concert 88x package, including the rackmount kit, audio cables, and power adapter.
સેટઅપ સૂચનાઓ
1. Receiver Placement and Connections
Place the CR88x receiver in a suitable location, ideally within 300 feet line-of-sight of the transmitter. Ensure proper ventilation around the unit.
- પાવર કનેક્શન: શામેલ પાવર એડેપ્ટરને સાથે જોડો POWER DC IN port on the rear of the CR88x receiver and plug it into a power outlet.
- ઓડિયો આઉટપુટ: રીસીવરને તમારી સાથે જોડો amplifier, mixer, or recording device using either the સંતુલિત આઉટપુટ (XLR) or અસંતુલિત આઉટપુટ (1/4" jack).
Image: Rear panel of the CR88x receiver, highlighting the power input, balanced XLR output, and unbalanced 1/4" output connections.
2. ટ્રાન્સમીટર બેટરી ઇન્સ્ટોલેશન
The CH88 handheld transmitter requires two AA batteries for operation.
- Unscrew the bottom cap of the CH88 handheld transmitter.
- Insert two fresh AA batteries, observing the correct polarity (+/-) as indicated inside the battery compartment.
- Securely screw the bottom cap back onto the transmitter.
Image: Close-up of the CH88 handheld microphone, illustrating its design and the location of the power/mute button.
3. Rackmount Installation (Optional)
The included rackmount kit allows for professional installation of the CR88x receiver into a standard equipment rack.
- Attach the rack ears to the sides of the CR88x receiver using the provided screws.
- Mount the receiver into an available rack space.
ઓપરેટિંગ સૂચનાઓ
1. Powering On and Initial Scan
- દબાવો પાવર button on the CR88x receiver to turn it on. The display will illuminate.
- દબાવો પાવર button on the CH88 handheld transmitter to turn it on.
- On the receiver, press the સ્કેન કરો button. The receiver will automatically scan for the clearest available frequency.
- Once a frequency is found, press the IR button on the receiver. Point the IR window of the receiver towards the IR sensor on the transmitter (usually located near the battery compartment or on the body). The frequency will be synced to the transmitter.
Image: Front panel of the CR88x receiver, displaying the volume control, status indicators (Ready, Peak), and control buttons (IR, Scan, Power).
2. વોલ્યુમ એડજસ્ટ કરવું
નો ઉપયોગ કરો વોલ્યુમ knob on the CR88x receiver to adjust the audio output level. Monitor the પીક indicator; if it frequently illuminates, reduce the volume to prevent distortion.
3. મ્યૂટ ફંક્શન
The CH88 handheld transmitter features a mute button. Press it briefly to mute or unmute the microphone. The LED indicator on the transmitter will change to reflect the mute status.
જાળવણી
- સફાઈ: Use a soft, dry cloth to clean the exterior of the receiver and transmitter. Avoid using abrasive cleaners or solvents.
- બેટરી રિપ્લેસમેન્ટ: Replace the AA batteries in the CH88 transmitter when the battery indicator shows low power or when audio quality degrades. Always use fresh, high-quality batteries.
- સંગ્રહ: When not in use for extended periods, remove batteries from the transmitter and store the system in a cool, dry place, away from extreme temperatures and humidity.
- એન્ટેના: Ensure the receiver antennas are securely attached and positioned for optimal reception. Avoid bending or damaging them.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| No sound from system |
|
|
| Intermittent audio or dropouts |
|
|
| Poor audio quality / Distortion |
|
|
વિશિષ્ટતાઓ
| મોડલ | SWC88XHQ7-D |
| માઇક્રોફોન ફોર્મ ફેક્ટર | હેન્ડહેલ્ડ |
| ફ્રીક્વન્સી બેન્ડ | D Band: 542–566 MHz |
| ચેનલોની સંખ્યા | 100 |
| ઓપરેટિંગ રેન્જ | 300' (line-of-site) |
| Power Source (Transmitter) | 2 AA બેટરી જરૂરી છે |
| કનેક્ટિવિટી ટેકનોલોજી | XLR |
| ધ્રુવીય પેટર્ન | યુનિડાયરેક્શનલ (સુપર-કાર્ડિયોઇડ) |
| પરિમાણો (L x W x H) | 12.5 x 9.6 x 3.55 ઇંચ |
| વસ્તુનું વજન | 2.8 પાઉન્ડ |
| રંગ | કાળો, ચાંદી |
| સામગ્રી | ક્રિસ્ટલ |
| ભલામણ કરેલ ઉપયોગ | ગાયન |
વોરંટી અને આધાર
For warranty information and technical support, please refer to the official Samson Technologies webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. ચોક્કસ વોરંટી શરતો પ્રદેશ અને રિટેલર દ્વારા બદલાઈ શકે છે.
No specific warranty details or direct support contacts were provided in the product data.
સત્તાવાર ઉત્પાદન વિડિઓઝ
આપેલા ડેટામાં વિક્રેતાના કોઈ સત્તાવાર ઉત્પાદન વિડિઓઝ મળ્યા નથી.
