Paulmann 94453 Capea LED Outdoor Wall Lamp મોશન ડિટેક્ટર સૂચના માર્ગદર્શિકા સાથે

પરિચય

Thank you for choosing the Paulmann 94453 Capea LED Outdoor Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image: The Paulmann Capea LED Outdoor Wall Lamp, showing the product itself and its retail packaging. The lamp is black, with a conical shade and an integrated motion sensor at the base.

મહત્વપૂર્ણ સલામતી સૂચનાઓ

• ઇલેક્ટ્રિકલ સલામતી: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply before installation, maintenance, or repair.
• આઉટડોર ઉપયોગ: This product is designed for outdoor use (IP44 rated). Ensure all connections are properly sealed to prevent water ingress.
• માઉન્ટ કરવાનું: Mount the fixture securely on a stable surface. Do not install on flammable surfaces.
• પ્રકાશ સ્ત્રોત: The LED light source is integrated and not replaceable by the user. Do not attempt to open or modify the light source compartment.
• તાપમાન: એલને ઢાંકશો નહીંamp with insulating material. Ensure adequate air circulation around the fixture.

પેકેજ સામગ્રી

ઇન્સ્ટોલેશન શરૂ કરતા પહેલા ખાતરી કરો કે બધા ઘટકો હાજર છે:

• 1x Paulmann Capea LED Outdoor Wall Lamp (મોડલ 94453)
• એસેમ્બલી સૂચનાઓ
• માઉન્ટિંગ હાર્ડવેર (સ્ક્રૂ, વોલ પ્લગ) - (Assumed, as typical for wall lamps)

ટેકનિકલ વિશિષ્ટતાઓ

Image: Technical drawing showing the dimensions of the Paulmann Capea LED Outdoor Wall Lamp: 153mm width, 165mm height, and 96mm depth.

સ્થાપન માર્ગદર્શિકા

તમે પ્રારંભ કરો તે પહેલાં: Ensure the main power supply to the installation area is switched off at the circuit breaker. Use appropriate tools and safety equipment.

1. માઉન્ટ કરવાનું સ્થાન તૈયાર કરો: Choose a suitable wall location for the lamp, ensuring it is a stable surface and allows for proper wiring. Mark the drilling points for the mounting bracket.
2. ડ્રિલ છિદ્રો: Drill holes at the marked points and insert appropriate wall plugs (if necessary).
3. માઉન્ટ બ્રેકેટ: આપેલા સ્ક્રૂનો ઉપયોગ કરીને માઉન્ટિંગ બ્રેકેટને દિવાલ સાથે જોડો.
4. વાયરિંગ: તમારા મુખ્ય પુરવઠામાંથી ઇલેક્ટ્રિકલ વાયરને l ની અંદરના ટર્મિનલ બ્લોક સાથે જોડોamp fixture. Ensure correct polarity (Live, Neutral, Earth) and secure all connections tightly. Refer to local electrical codes.
5. એલ જોડોamp: કાળજીપૂર્વક l જોડોamp fixture to the mounting bracket, ensuring no wires are pinched. Secure the lamp જગ્યાએ.
6. પાવર પુન Restસ્થાપિત કરો: એકવાર ઇન્સ્ટોલેશન પૂર્ણ થઈ જાય અને બધા કનેક્શન સુરક્ષિત થઈ જાય, પછી મુખ્ય સર્કિટ બ્રેકર પર પાવર પુનઃસ્થાપિત કરો.

Image: The Paulmann Capea LED Outdoor Wall Lamp shown with its packaging, which illustrates basic installation steps and features like the motion sensor and IP44 rating.

ઓપરેટિંગ સૂચનાઓ

The Paulmann Capea LED Outdoor Wall Lamp ઓટોમેટિક ઓપરેશન માટે એકીકૃત મોશન સેન્સર ધરાવે છે.

મોશન સેન્સર સેટિંગ્સ

The motion sensor can be adjusted to suit your specific needs. Typically, there are controls for:

• શોધ કોણ: Approximately 90 degrees.
• તપાસ શ્રેણી: 2-8 મીટર.
• પ્રકાશ સંવેદનશીલતા (LUX): Determines the ambient light level at which the sensor activates the lamp.
  • ON < 20 Lux: એલamp will turn on when motion is detected and the ambient light is below 20 Lux (dark conditions).
  • OFF > 20 Lux: એલamp will remain off when the ambient light is above 20 Lux (daylight conditions).
• સમય ચાલુ: Sets the duration the light remains on after motion is detected. Adjustable from approximately 5 seconds to 5 minutes.

Adjust these settings using the small dials or switches located on the motion sensor unit, usually found at the bottom of the lamp. Use a small screwdriver if necessary.

Image: A diagram illustrating the motion sensor's detection angle (90 degrees), range (2-8 meters), and light sensitivity settings (On < 20 Lux / Off > 20 Lux), along with the adjustable time duration (5 seconds - 5 minutes).

છબી: ક્લોઝ-અપ view of the integrated motion sensor located at the base of the Paulmann Capea LED Outdoor Wall Lamp, showing its spherical lens.

જાળવણી

• સફાઈ: સફાઈ કરતા પહેલા પાવર ડિસ્કનેક્ટ કરો. l સાફ કરોamp સોફ્ટ સાથે, ડીamp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• પ્રકાશ સ્ત્રોત: The LED light source is integrated and designed for long-term use (30,000 hours). It is not user-replaceable. If the LED fails, the entire fixture typically needs replacement.
• નિરીક્ષણ: સમયાંતરે એલનું નિરીક્ષણ કરોamp for any signs of damage, loose connections, or wear. Address any issues promptly.

મુશ્કેલીનિવારણ

વોરંટી અને ગ્રાહક આધાર

Paulmann products are manufactured to high quality standards. This product comes with a 5-year guarantee, as indicated on the packaging. For warranty claims, technical assistance, or further inquiries, please contact your retailer or Paulmann customer support directly. Keep your proof of purchase for warranty purposes.

For more information, visit the official Paulmann webસાઇટ: www.paulmann.com

નિકાલ માહિતી

This product contains electronic components and an integrated LED light source. Do not dispose of it with general household waste. Please take it to a designated collection point for electrical and electronic equipment recycling in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.