સ્માર્ટવેર SH4-90160 વાયરલેસ વોલ સ્વિચ યુઝર મેન્યુઅલ

1. પરિચય

The Smartwares SH4-90160 Wireless Wall Switch provides convenient control over your lighting and appliances. Designed for ease of use and flexible placement, this battery-operated switch integrates seamlessly with Smartwares Plug & Connect receivers. This manual will guide you through the installation, operation, and maintenance of your new wireless wall switch.

છબી 1.1: આગળ view of the Smartwares SH4-90160 Wireless Wall Switch.

2. પેકેજ સામગ્રી

કૃપા કરીને નીચેની વસ્તુઓ માટે પેકેજ તપાસો:

• 1x Smartwares SH4-90160 Wireless Wall Switch
• 1x CR2032 Lithium-ion Battery (pre-installed or separate)
• 1x વપરાશકર્તા માર્ગદર્શિકા

જો કોઈ વસ્તુ ખૂટે છે અથવા ક્ષતિગ્રસ્ત છે, તો કૃપા કરીને ગ્રાહક સપોર્ટનો સંપર્ક કરો.

3. સલામતી માહિતી

• ઉપકરણને અતિશય તાપમાન, સીધો સૂર્યપ્રકાશ અથવા ભેજના સંપર્કમાં ન લાવો.
• This device is intended for indoor and protected outdoor use. Ensure it is not directly exposed to heavy rain or water.
• બાળકોની પહોંચથી દૂર રાખો.
• Do not attempt to open or repair the device yourself. This will void the warranty.
• સ્થાનિક નિયમો અનુસાર બેટરીનો નિકાલ કરો. બેટરીનો આગમાં નિકાલ કરશો નહીં.
• Only use the specified battery type (CR2032).

4. સેટઅપ અને ઇન્સ્ટોલેશન

4.1 બેટરી ઇન્સ્ટોલેશન

1. Carefully open the back cover of the wall switch.
2. Insert the CR2032 Lithium-ion battery, ensuring the correct polarity (+/-).
3. પાછળનું કવર સુરક્ષિત રીતે બંધ કરો.

નોંધ: The battery may already be pre-installed. Remove any protective tab if present.

4.2 Pairing with Smartwares Plug & Connect Receivers

The SH4-90160 Wireless Wall Switch must be paired with a Smartwares Plug & Connect receiver (e.g., SH4-90264, SH4-90256, SH4-90263, SH4-90266, SH4-90265) to control lights or appliances. Receivers are sold separately.

1. Ensure your Smartwares Plug & Connect receiver is powered on and within range of the wall switch.
2. Put your Smartwares Plug & Connect receiver into pairing mode. This usually involves pressing a small button on the receiver for a few seconds until an indicator light flashes. Refer to your receiver's manual for specific instructions.
3. While the receiver is in pairing mode, press the button on the SH4-90160 Wireless Wall Switch.
4. The receiver's indicator light should stop flashing, confirming successful pairing.
5. Test the connection by pressing the wall switch button. The connected light or appliance should turn on/off.

You can pair multiple SH4-90160 switches with one receiver, or one switch with multiple receivers, depending on your desired setup.

Image 4.1: The Smartwares Plug & Connect ecosystem, showing various compatible devices.

4.3 Mounting the Wall Switch

Since the SH4-90160 is battery-operated and wireless, it can be placed almost anywhere.

• Use double-sided adhesive tape (not included) to mount the switch on a clean, dry, flat surface.
• Alternatively, use screws (not included) to secure the switch to a wall or other surface.
• Ensure the chosen location is within the operational range of your paired Smartwares Plug & Connect receiver.

5. ઓપરેટિંગ સૂચનાઓ

Once paired, operating the Smartwares SH4-90160 Wireless Wall Switch is straightforward.

• ચાલુ/બંધ કરવા માટે: Press the main button on the wall switch. Each press will toggle the connected light or appliance between ON and OFF states.
• The switch provides a convenient way to control your lighting, for example, turning bedroom lights on or off from your bed.

Image 5.1: Detail of the push-button interface on the wireless wall switch.

6. જાળવણી

6.1 સફાઈ

ઉપકરણને નરમ, સૂકા કપડાથી સાફ કરો. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.

6.2 બેટરી રિપ્લેસમેન્ટ

When the switch's response becomes inconsistent or stops working, the battery may need to be replaced.

1. Carefully open the back cover of the wall switch.
2. Remove the old CR2032 Lithium-ion battery.
3. Insert a new CR2032 Lithium-ion battery, ensuring the correct polarity (+/-).
4. પાછળનું કવર સુરક્ષિત રીતે બંધ કરો.
5. સ્થાનિક નિયમો અનુસાર જૂની બેટરીનો જવાબદારીપૂર્વક નિકાલ કરો.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

Smartwares products are manufactured to high quality standards. In the unlikely event of a defect, please contact your retailer or Smartwares customer service.

For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official Smartwares webસાઇટ

ફાજલ ભાગોની ઉપલબ્ધતા: ૧ વર્ષ (ઉત્પાદન સ્પષ્ટીકરણો મુજબ).